PTFE Coated Fiberglass Ntama a Wɔyɛ

PTFE nneɛma a ɛkorɔn

Nneɛma a ɛyɛ fɛ a wɔde nyansa yɛ

KENKAN NKYERƐKYERƐMU PII

PTFE Adhesive Tape,PTFE Belting,PTFE Ntama a Wɔakata so ...

KENKAN NKYERƐKYERƐMU PII

YƐN NNƐM

Yɛn adwumakuw no betumi de 8 nneɛma ahorow a ɛtoatoa so a PTFE Adhesive Tape, PTFE Mesh Belt, PTFE Conveyor Belt, ne PTFE Coated Fabric, ne nea ɛkeka ho bɛboro 100 ahorow a polymer mfiridwuma ntama a wɔabom ayɛ ama.

PTFE Adhesive Tape a wɔde yɛ nneɛma

PTFE Adhesive Tape a wɔde yɛ nneɛma

Wɔde polytetrafluoroethylene (PTFE) resin titiriw na ɛyɛ PTFE Adhesive Tape, na ɛtɔ mmere bi a wɔde ahwehwɛ nhama ka ho sɛ nea ɛhyɛ mu den na ama n’ahoɔden ne ne kyɛ.
PTFE Ntama a Wɔakata so

PTFE Ntama a Wɔakata so

PTFE Coated Fabric yɛ ade foforo a wɔabom ayɛ a ɛyɛ adwuma yiye na ɛsom bo a ɛkorɔn.
PTFE Conveyor Belt a ɛwɔ hɔ

PTFE Conveyor Belt a ɛwɔ hɔ

Teflon conveyor belt yɛ conveyor belt a wɔde glass fiber ntama ayɛ sɛ ade a wɔde gyina so na wɔde Teflon resin akata so.
PTFE Mesh Belt a wɔde yɛ adwuma

PTFE Mesh Belt a wɔde yɛ adwuma

PTFE Mesh Belt no titiriw yɛ polytetrafluoroethylene emulsion na wɔde ahwehwɛ fiber mesh a ɛyɛ adwuma yiye ahyɛ mu ma.
Silicone ntama a wɔde ayɛ

Silicone ntama a wɔde ayɛ

Silicone ntama yɛ pad bi a wɔde silicone ade ayɛ, a ɛwɔ su ahorow pii a eye kyɛn so ne mmeae a ɛtrɛw a wɔde di dwuma.
PTFE Ntini a Wɔde Yɛ Adwuma

PTFE Ntini a Wɔde Yɛ Adwuma

PTFE Membrane yɛ adansi ade a ɛyɛ adwuma yiye na ɛsom bo kɛse a wɔde ka ho. Wɔde
di dwuma kɛse wɔ nnɛyi adansi ho nhyehyɛe mu, na ɛma wonya nneɛma foforo a wobetumi
ayɛ ne nkɔso wɔ adansi adwuma mu.

GUADIE

Ɛlektrɔnik mfiridwuma

Ɛma ahobammɔ a ɛho hia ma ɛlɛtrɔnik nneɛma wɔ ɛlɛtrɔnik adwumayɛ mu, hwɛ hu sɛ ɛlɛtrɔnik nneɛma ahobammɔ ne nea egyina pintinnƐma ahobammɔ a ɛho hia ma ɛlɛtrɔnik nneɛma .
Sua Pii
Ahunmu adwumayɛbea

Sɛ wɔde di dwuma wɔ ahunmu adwuma mu a, ɛwɔ mfaso ne mfaso pii. Ebetumi adi ahunmu ahwehwɛde a emu yɛ den a ɛfa nneɛma a wɔde yɛ adwuma ho no ho dwuma na ahwɛ ahu sɛ ahunmu ahyɛn no bɛyɛ adwuma yiye na ahobammɔ wom.
Sua Pii
Nnuruyɛ adwuma

Wɔ nnuruyɛ mu no, ne nnuru a ɛko tia nsɛe a ɛkyɛn so ne sɛnea ɛyɛ adwuma a ɛnyɛ den no ma ahobammɔ a ɛho hia ma nnwinnade ne sɔhwɛ ahorow, na ɛhwɛ hu sɛ nnuru a wɔde yɛ adwuma no yɛ ahobammɔ na nnwinnade no kyɛ.
Sua Pii
Ahoɔden adwumayɛ

Wɔ ahoɔden adwumayɛ mu no, ne hyew a ɛkorɔn, onyin a ɛko tia, nsɛe ne nsɔano adwumayɛ a ɛkyɛn so ma ahotoso a ɛho hia ma ahoɔden mfiri ahorow, hwɛ hu sɛ mfiri no yɛ adwuma yiye, ahobammɔ ne pintinn.
Sua Pii
Carbon fiber adwumayɛkuw

Bere a wɔreyɛ carbon fiber nneɛma no, wɔtaa de Teflon tape di dwuma wɔ nkuku no ani de hwɛ hu sɛ wobetumi ayi carbon fiber nneɛma no ayɛ no yiye na wɔakɔ so ayɛ nea ɛyɛ papa.
Sua Pii
Kar adwumayɛkuw

Ɛdi dwuma titiriw wɔ kar adwumayɛ mu, efi sɛnea ɛma kar mu hwɛbea tu mpɔn so kosi engine transmission nhyehyɛe a ɛyɛ papa so, a ɛda ne mfaso soronko ne ne bo adi.
Sua Pii

ABOUT AOKAI

Aokai, China adwumayɛfo PTFE ade manufacturing & customization specialist, de nnwuma ano aduru a edi mũ a ɛfa ahunmu, carbon fiber, kar, nnuru
...

KENKAN NKYERƐKYERƐMU

20000

m ²

Company mpɔtam hɔ

1800000

m ²

Afe afe tumi a wotumi yɛ

100

Nneɛma a ɛne polymer hyia

PTFE nneɛma a wɔsɔ hwɛ

Aokai wɔ sɔhwɛ nnwinnade a ɛyɛ pɛpɛɛpɛ ne nhwehwɛmu a emu yɛ den a ɛfa nneɛma a ɛyɛ papa ho de hwɛ hu sɛ PTFE nneɛma a ɛyɛ papa.

Ɔhyew a ɛkorɔn ne nea ɛba fam a ɛko tia

Ɔhyew a ɛkorɔn sen biara no tumi du 300 ° C.

Ɔhyew a ɛkorɔn ne nea ɛba fam a ɛko tia

Ɔhyew a ɛkorɔn sen biara no tumi du 300 ° C.
Nneɛma a ɛyɛ nnam ne nea ɛyɛ nnam

Ɛwɔ nkɛntɛnso a ɛyɛ abofono wɔ nneɛma nyinaa so, a nneɛma a wɔde nkata so ka ho.

Nneɛma a ɛyɛ nnam ne nea ɛyɛ nnam

Ɛwɔ nkɛntɛnso a ɛyɛ abofono wɔ nneɛma nyinaa so, a nneɛma a wɔde nkata so ka ho.
Nsu a ɛko tia

Ɛdenam nneɛma a wɔde afrafra a wɔde di dwuma so no, wɔama ne nusu a ɛko tia no atu mpɔn kɛse.

Nsu a ɛko tia

Ɛdenam nneɛma a wɔde afrafra a wɔde di dwuma so no, wɔama ne nusu a ɛko tia no atu mpɔn kɛse.
a ɛko tia nea ɛhyɛ

Ɛnyɛ mmerɛw sɛ ngo bɛsɛe na akɔ mu.

a ɛko tia nea ɛhyɛ

Ɛnyɛ mmerɛw sɛ ngo bɛsɛe na akɔ mu.
nsuo ntumi nkɔ mu

Ebetumi akura adwumayɛ a ɛyɛ den mu wɔ mmeae ahorow a ɛhɔ yɛ nwini.

nsuo ntumi nkɔ mu

Ebetumi akura adwumayɛ a ɛyɛ den mu wɔ mmeae ahorow a ɛhɔ yɛ nwini.
Ngo a ɛko tia

Ɔdan no yɛ den na ahoɔden a ɛwɔ soro no sua, na ɛma ɛyɛ den sɛ ngo bɛkɔ ne mu.

Ngo a ɛko tia

Ɔdan no yɛ den na ahoɔden a ɛwɔ soro no sua, na ɛma ɛyɛ den sɛ ngo bɛkɔ ne mu.

NSƐM A ƐTO SO AKYI

Hwɛ yɛn amanneɛbɔ na hu pii fa Aokai New Material ho.

PTFE_Ntama_a_Ɔhyew_Akorɔn_wɔ_Aduan_Pharma_Filtration.png

24
Kutawonsa

Dɛn ne PTFE ntama a ɛyɛ hyew kɛse a wɔde di dwuma wɔ carbon fiber flat composite nneɛma mu?

Saa asɛm yi ka PTFE ntama a ɛyɛ hyew kɛse a wɔde di dwuma wɔ carbon fiber flat composite nneɛma mu ho asɛm. Compression molding: wɔde si moulds ne prepregs ntam a esiw epoxy resin adhesion ano, na ɛma demolding yɛ mmerɛw; wɔde ahyɛ nnua a ɛyɛ tratraa pii ntam na wɔakwati sɛ wɔbɛbata wɔn ho wɔn ho. Vacuum bag molding: reusable release film ntam prepreg ne breather ntama, ma kwan ma gas / resin fa bere a ɛma ɛyɛ mmerɛw peeling akyi ayaresa; textured side transfers fine surface texture ma bonding roughness tu mpɔn, na eyi sanding fi hɔ. Kɔ so yɛ: seamless non-stick conveyor belts soa prepregs fa ɔhyew / nhyɛso mmeae; cushion layer kyekyɛ nhyɛso pɛpɛɛpɛ tew localized indentations.

Hwɛ Nsɛm Pii

24
Kutawonsa

So wobetumi de ogyaframa ayaresa mfiridwuma adi dwuma de asakra PTFE substrates no ani? Sɛ wɔde ne dwumadi toto corona ayaresa ne plasma ayaresa ho a, ɛte dɛn?

Saa asɛm yi hwehwɛ sɛnea ɛbɛyɛ yiye sɛ wɔde ogyaframa sa yare ma PTFE ani nsakrae na ɛde nkɛntɛnso a ɛwɔ so no toto corona ne plasma ayaresa ho. Nea ebetumi aba: ogyaframa betumi asesa PTFE nanso wɔntaa mfa nni dwuma wɔ mfiridwuma mu — ahobammɔ ho asiane (PTFE porɔw ma awuduru HF ne perfluoroisobutylene fi adi); adwumayɛ anohyeto (surface ahoɔden nkutoo 30-35 mN / m, yɛ mmerɛw hye so). Adwumayɛ akwan: ogyaframa — bere tiaa mu ɔhyew a ɛkorɔn oxidation (>1000°C), etching kakra, oxygen akuw kakraa bi; corona — ahoɔden a ɛkɔ soro a ɛtwetwe no ma ozone/oxygen a ɛyɛ adwuma, oxidation a ɛyɛ mmerɛw, ahoɔden a ɛba fam no ntumi mmubu CF nkitahodi ahorow; plasma — nneɛma nketenkete/ɛlektrɔn/free radicals a ahoɔden kɛse wom no paapae CF nkitahodi mu tẽẽ na ɛde polar akuw (hydroxyl, carboxyl, amino) hyɛ mu.

Hwɛ Nsɛm Pii

24
Kutawonsa

Ntotoho a ɛfa Pɛpɛɛpɛ a ɛwɔ Curing Degree Sɔhwɛ Akwan a Wɔde Ma Silicone Pressure-Sensitive Adhesives (Solvent Extraction Ɔkwan, DSC Ɔkwan ne FTIR Ɔkwan)

Saa asɛm yi de akwan abiɛsa a wɔfa so sɔ nneɛma a wɔde nkata silicone nhyɛso ase no hwɛ sɛnea ɛte no yɛ pɛpɛɛpɛ no toto ho. Solvent extraction (gel content) susuw insoluble network fraction via Soxhlet extraction — overestimates esiane honam fam entangled afã horow a wodi mfomso sɛ crosslinks, pɛpɛɛpɛ ±2-5%, nnuru a ɛba fam koraa pɛpɛɛpɛ. DSC susuw residual reaction heat (α=1-ΔHresidual/ΔHtotal) — wotumi de ho to so wɔ low-to-medium nsakrae mu nanso ɛboro so wɔ nsakrae a ɛkorɔn mu esiane diffusion-limited residual groups nti, repeatability <±2%.

DIGITAL NKYEKYƐMU

NSƐM A ƐTO SO AKYI

Dɛn ne PTFE ntama a ɛyɛ hyew kɛse a wɔde di dwuma wɔ carbon fiber flat composite nneɛma mu?

Hwɛ Nsɛm Pii

So wobetumi de ogyaframa ayaresa mfiridwuma adi dwuma de asakra PTFE substrates no ani? Sɛ wɔde ne dwumadi toto corona ayaresa ne plasma ayaresa ho a, ɛte dɛn?

Hwɛ Nsɛm Pii

Ntotoho a ɛfa Pɛpɛɛpɛ a ɛwɔ Curing Degree Sɔhwɛ Akwan a Wɔde Ma Silicone Pressure-Sensitive Adhesives (Solvent Extraction Ɔkwan, DSC Ɔkwan ne FTIR Ɔkwan)

Hwɛ Nsɛm Pii

NKYERƐKYERƐMU A ƐYƐ NTƐM

ADWUMA HO NKYEKYƐMU