PTFE-coated fibreglas fabric sintering bɛ a minɛ waati tigitigi de wajibiya 370-400°C la. Furaw minnu bɛ to sen na: 30-90s (finman) fo miniti 3-5+ (mugu). Batch forow: miniti 5-15. Sintering under-sintering bɛ kɛ sababu ye ka finiw kɛ minnu tɛ ye, minnu ka gɛlɛn, minnu bɛ bɔ; ni aw bɛ sɔgɔsɔgɔ kojugu, o bɛ kɛ sababu ye ka a jɛ, ka a kari, ani ka gazi fluoride toxic bɔ. Taabolo ɲuman : aw bɛ foro funteni jateminɛnanw kɛ, ka sɛgɛsɛgɛli ɲɛnama kɛ (semi-transparent, flexible), ani ka kaseti sama sɛgɛsɛgɛliw kɛ. Aw bɛ a lajɛ tuma bɛɛ ko funteni dafalen ka kɛ kelen ye.

PTFE fini min funteni ka bon, o bɛ a minɛ ka ɲɛ walasa ka lakana ni a si jan sɔrɔ. Fɛn minnu ka kan ka kɛ: aw kana tɛmɛ 260°C kan abada (ni a bɛ 320°C sanfɛ, o bɛ sisi toxic bɔ), aw kana kurukuru nɔgɔlenw (a bɛ finimugu kari, ka fibreglasi bɔ kɛnɛ kan), aw kana saniya ni sɔgɔsɔgɔninjɛ ye (nɛgɛ wulu bɛ yɔrɔ tiɲɛ min tɛ nɔrɔ), aw bɛ funteni bonya yɔrɔ mara (a bɛ tigɛli bali), ani ka a bila a nɔ na ni kurukuruw walima u sɔgɔlen don. Magasin wulilen, a yɔrɔ ka jan UV la. Aw bɛ ganw don minnu bɛ funteni bali, aw bɛ u minɛ ni aw bɛ u minɛ.

PTFE fanga ka bon fini min ka funteni ka bon, o ye fibreglasi ye min bɛ se ka sabati kosɛbɛ ani PTFE fini min bɛ kɛ ka fɛnw datugu. Baara kunbabaw bɛ tali kɛ izini fɛnw lasecogo la (dumuni tobili, fini jalen, PCB ta), welding lakanani (heat-sealer covers, spatter shields), demolding ani hot press forming (rubber molding, PV lamination), kuran insulation (motɛri slot liners, cable wraps), architectural membranes (stade sow, san 30+ ɲɛnamaya), kemikali anti-corrosion (expansion jogindaw, tankiw datugulanw), aerospace (bɔrɔsi sumalenw), ani baara kɛrɛnkɛrɛnnenw (laser tigɛ, 3D sɛbɛnni).

PTFE fini min bɛ funteni caman na, o baara waati bɛ ɲɔgɔn ta kosɛbɛ ka kɛɲɛ ni a kɛcogo ye. Kemikɛli min bɛ kɛ ka sɔgɔsɔgɔninjɛ kɛlɛ, o bɛ se ka mɛn san 3+ kɔnɔ (a ka jan siɲɛ 4 ka tɛmɛ lastikuw kan). Dumuni tobilikɛminɛnw bɛ kalo tɛmɛnenw na ni tiɲɛni dɔɔnin ye. Industriw ka conveyor belts bɛ sɛgɛn ka bɔ ɲɔgɔnkanu fɛ. PV lamination (150°C, EVA contact) bɛ si hakɛ danmadɔ sɔrɔ. Fɛn minnu bɛ kɛ ni sɔgɔsɔgɔninjɛ gɛlɛnw ye (disiki sɔgɔlenw) olu si tɛ mɛn. Fɛn kolomaw : funteni hakɛ kɔlɔsili (a to ≤260°C), aw bɛ aw yɛrɛ tanga kurukuruni nɔgɔlenw ma, ka a saniya tuma bɛɛ, ani ka a falen a waati la ni a kurulen don walima ni a ɲɛ bilennen don.

PTFE fini min funteni ka bon (fibreglasi min dilannen don ni PTFE ye) bɛ mɛn ka tɛmɛ tɔw bɛɛ kan ni a maralen bɛ 260°C duguma, ka a yɔrɔ janya kurukuru nɔgɔlenw na, ani ni a saniyalen don ni baarakɛminɛn nɔgɔlenw ye. Fɛnba minnu bɛ ɲɛnamaya dantigɛ : funteni tiɲɛni ka tɛmɛ 260°C kan, funteni sɔgɔli ka bɔ funteni/nɛnɛ teliya la, masinw ka sɛgɛn ka bɔ a kɔrɔtali ni a tension na, kemikaliya binkanni ka bɔ nɛgɛ alkali wulilenw na walima oksidan barikamaw fɛ, tiɲɛni min bɛ bɔ nɛgɛ sɔgɔlanw na saniya waati, ani UV jirali kɛnɛma baara kama. Coating ni substrate jogo fana nafa ka bon.

PTFE fini min bɛ funteni caman na (fibreglasi min dilannen don ni PTFE ye) ka ɲi kosɛbɛ mikrowɛn sumaya la bawo a bɛ mikrow lase k’a sɔrɔ a ma fanga minɛ, a bɛ se ka 260°C kɛlɛ, wa a yɔrɔ tɛ nɔrɔ. Baara minnu bɛ kɛ, olu ye mikro-onde tobilikɛminɛnw ye, izini jalen fɛnw laseginlanw, reactorw datugulanw walasa ka kemikɛlifɛnw sɔgɔ, ani mikro-onde popcorn bɔrɔw datugulanw. FDA ka kalasi minnu bɛ sɔrɔ dumuni na.

PTFE fini min bɛ funteni caman na (PTFE-coated fibreglas) tɛ se ka flex resistance ɲuman sɔrɔ barisa fibreglasi substrat bɛ kari a yɛrɛ la. Fini minnu ka fin (0,08mm) bɛ kisi ni u dabɔra kɛmɛ caman fo ka se ba caman ma; grade girinmanw (>0,25mm) bɛ kari tan ni caman kɔfɛ. Satin fini bɛ tɛmɛ fini gansan kan. Walasa ka to ka ɲɔgɔn kɔ, aw bɛ PTFE filimu gɛlɛn walima fini min sinsinnen bɛ aramidi kan, aw bɛ o jateminɛ o nɔ na.

PTFE fini min bɛ funteni caman bɔ (PTFE-coated fibreglass) bɛ kɛ ka caya finiw sɛbɛnni ni kalali la funteni jiginni sɛbɛnnikɛlanw (180-230°C), ɛkran sɛbɛnni tabali datugulanw, jalen mesh cɛsirilanw, fusing machine cɛsirilanw, ani roller wrapping. A yɔrɔ min tɛ nɔrɔ, o bɛ tintin/nɔrɔli tolenw bali, o bɛ dɔ bɔ saniya jɔli waati la ani ka finiw cogoya ɲɛ. Cɛsirilan minnu tɛ ban, olu bɛ se ka kɛ sababu ye ka fɛnw dilan ka taa a fɛ.

PTFE fini min bɛ funteni caman na (fibreglasi min datugulen don ni PTFE ye) ye filɛrikɛlan ɲuman ye min bɛ kɛ ka ɲɛsin cogoya juguw ma: gazi bɔlenw buguri bɔli (siman, bɔgɔ jeni, kɔɔri bɔgɔlanw fo ka se 260°C ma), jilama sɔgɔlenw bɔli (asidiw, alkaliw, tuluw), dumuni/furakɛli sterili filɛriw, ani HEPA saniyaso filɛriw. Yɔrɔ min tɛ nɔrɔ, o bɛ buguri bali ka sɔgɔsɔgɔ, wa a bɛ a to saniya ka nɔgɔn. Membrane-laminés grades bɛ se ka ultra-low emissions sɔrɔ.

PTFE fini min bɛ funteni caman na, o bɛ kuran sɛnɛcogo ɲuman mara ka bɔ -180°C la ka se 260°C ma: a hakɛ bɛ se ka kɛ >1013 Ω·cm ye 200°C la, dielektriki sabatili bɛ sabati 2.0-2.1 na. Ni 260°C sanfɛ, PTFE bɛ nɔgɔya, ka toli ka tɛmɛ 327°C kan, ka insulasi bɔnɛ kudayi. Ni 0°C duguma, insulasi bɛ ɲɛ nka finimugu bɛ kɛ kari. Aw bɛ to 260°C kɔnɔ walasa ka baara kɛ min bɛ se ka da a kan.