PTFE avɔ si ƒe dzoxɔxɔ lolo (PTFE-coated fiberglass) sɔ nyuie na nuɖuɖu tsɔtsɔ yi teƒe bubuwo le eƒe dzoxɔxɔ ƒe tsitretsitsi 260°C, -70°C vuvɔ ƒe asitɔtrɔ, anyigba si me meléna o, kple FDA ƒe sedziwɔwɔ ta. Nu vevi siwo woate ŋu azã: abolomeƒewo (bisiklet, abolo, pizza), nuɖuɖu tsɔtsɔ yi teƒe bubu siwo wofli, akpɔnɔ vivi fafɛ kawo, mɔ̃ siwo me tsikpe le, dzoxɔxɔ nutrenu, kple agbalẽ xatsaxatsa. Eɖea gbeɖuɖɔ kple dzadzɛnyenye ƒe ɣeyiɣi dzi kpɔtɔna.

Ɣletigbalẽ – avɔ si wotsɔ PTFE ƒoe tete ɖe ahuhɔ̃e ƒe ʋuƒo siwo wodo dzoe dome le 360-380°C – trɔa anyigba ƒe nɔnɔme, eƒe asiɖeɖe le eŋu ƒe nɔnɔmewo, tsi ƒe gege ɖe eme, kple mɔ̃ɖaŋununya ƒe dɔwɔwɔ ŋutɔ. Eɖea ʋuʋudedi dzi kpɔtɔna tso Ra 0.5-1.0 μm va ɖo <0.05 μm, etsia pinholes nu, enaa woƒe vuvu ƒe tsitretsitsi nyona ɖe edzi, gake eɖea aɖatsi ƒe ŋusẽ kple asitɔtrɔ le nɔnɔmewo ŋu dzi kpɔtɔna. Ele vevie na release liners kple elektrik-nulénu.

Nu enee wotsɔ dea dzesi PTFE avɔ si ƒe dzoxɔxɔ lolo ƒe nutsyɔtsyɔ ƒe ɖekawɔwɔ: nutsyɔtsyɔ ƒe wɔwɔme (nusuewo ƒe lolome 0.15-0.35 μm, ʋeʋẽ, nu sesẽ siwo le eme), nutsyɔtsyɔ & sintering ƒe ɖoɖo (blade coating si wolɔ̃na hena ɖekawɔwɔ), substrate ƒe nyonyome (weave pattern, pre-treatment), kple ewɔwɔ ƒe nɔnɔme (20-25°C, <60% RH). Dip + blade ƒo ƒu ƒe dɔwɔwɔ daa asɔ le gege ɖe eme kple anyigba ƒe glidzaglidza.

PTFE avɔ si ƒe dzoxɔxɔ lolo kple silicone avɔ siaa zãa fiberglass avɔ abe gɔmeɖoanyi ene gake woto vovo le nusi wotsɔ blaa nu me (PTFE resin vs silicone rubber). PTFE nyo wu le nusiwo meléna o, tsitretsitsi ɖe nudodo ŋu, kple atikewo ƒe tsitretsitsi vaseɖe 260°C me. Silicone avɔ naa woate ŋu atrɔ ɖe nɔnɔmewo ŋu nyuie wu, elektrikŋusẽ te ŋu xea mɔ na wo, eye dzo mete ŋu nɔa te ɖe enu o (si ade 230°C). Tiae le nusi nètsɔ ɖo nɔƒe gbãtɔ nu.

PTFE avɔ si me dzoxɔxɔ le ŋutɔ naa atikewo te ŋu nɔa te ɖe enu etɔxɛe, eye wòte ŋu nɔa te ɖe aɖi sesẽwo, alkaliwo, lãmenugbagbeviwo ƒe ʋeʋẽ lilili, kple ya siwo gblẽa nu le ame ŋu nu. Nyati sia gblɔ eƒe nusiwo te ŋu nɔa te ɖe dɔlékuiwo nu, seɖoƒe siwo le eŋu (alkali ga siwo wofa, atike sesẽ siwo naa fluorine), kple nu veviwo abe dzoxɔxɔ, eƒe kpekpeme, kple mɔ̃wo ƒe nuteɖeamedzi ene tsitotsito.

Menye avɔ si wotsɔa fiberglass wɔe koe PTFE ƒe tsidedee nye o. Nyati sia ɖe nu 7 bubuwo ɖe go – aramid, carbon fiber, PBI, porous metal, graphite, asbestos (woɖee ɖa vivivi), kple ceramic fillers – kple woƒe dɔwɔwɔ ƒe nɔnɔmewo, viɖewo, seɖoƒewo, kple dɔwɔwɔ veviwo.

Nyati sia ɖe nusita fiberglass avɔ si me alkali mele o ye nye nusi wodi wu be woatsɔ awɔ PTFE avɔ si me dzoxɔxɔ le ŋutɔ la me. Eƒo nu tso atikewo ƒe kadodo to silane coupling agents kple dzɔdzɔmenu veviwo abe dzoxɔxɔ ƒe liƒo, didime ƒe liƒo, kple xɔxlɔ̃ ƒe tsitretsitsi ŋu – si naa dɔwɔwɔ nɔa anyi didi le nɔnɔme sesẽwo me.