Maka oke ọnọdụ & arụmọrụ na-adịgide adịgide
Onye nrụpụta gị tụkwasịrị obi maka teepu ihe nkiri PTFE

Ị na-eme ka usoro ọrụ na-aga ngwa ngwa: Igwe anaghị agba nchara, arụ ọrụ ngwa ngwa

Ị na-ebuli uru: obere ihe mkpofu, uru dị elu

AKWỤKWỌ RỊỌRỌ

Ụlọ » Ngwaahịa » PTFE nrapado teepu » Ihe nkiri ihe nkiri PTFE PTFE Ihe nkiri teepu

Ihe nkiri ihe nkiri PTFE

A na-akpọkwa teepu ihe nkiri PTFE ptfe ihe nkiri ntanye teepu, gụnyere ụdị ntụziaka na ndị na-abụghị ntụziaka.

1.Mkpuchi PTFE na-adịghị mma;
2.Secure na ntụkwasị obi silicone nrapado;
3.Wide okpomọkụ na-eguzogide si -54 ℃ (-65 ℉) na 260 ℃ (500 ℉);
4.Obere iru mmiri;
5.Easy iji, ogologo ndụ ọrụ;
6.Special maka akara na mkpuchi ihe;
7. Akwụkwọ: ISO 9001: 2015, FDA & UL;
8.Excellent ọrụ & nkwado gụnyere pre-sales, in-sales & after-sales;
9.Nabata hazie;
10.OEM/OBM ọrụ.


Nnweta:



Jụọ ase

ptfe ihe nkiri teepu ptfe ihe nkiri nrapado teepu teepu ihe nkiri PTFE na-abụghị ntụziaka PTFE nrapado teepu PTFE teflon nrapado teepu

Otu ngwaahịa

Nkọwa ngwaahịa

Anyị bụ ndị ọkachamara PTFE Film teepu ndị na-emepụta ihe na ndị na-ebubata ya na China, ịzụta ma ọ bụ na-ere ihe nkiri ptfe nrapado teepu site na ụlọ ọrụ anyị. Maka nlele efu, kpọtụrụ anyị ugbu a maka ahaziri.

A na-eme teepu ihe nkiri PTFE nke dị ọcha Teflon (Teflon) na-atụgharị ihe nkiri dị ka ihe ndabere, mgbe ọgwụgwọ pụrụ iche n'otu akụkụ, otu akụkụ nke nrapado. Site na njirimara zuru oke pụrụ iche, ọ na-enye ihe ngwọta dị elu maka ndị injinia na ndị na-emepụta ihe na mpaghara ngwa. Teepu a ugbu a bụ okpomọkụ kacha arụ ọrụ dị elu, kemịkalụ na teepu na-eguzogide esemokwu.

ngwaahịa Ntinye

PTFE Film teepu bụ polytetrafluoroethylene (PTFE) film dabeere teepu, otu elu mesoo na silicone nrapado, nke awade a dịgasị iche iche okpomọkụ eguzogide nso si -54 ℃ (-65 ℉) ka 260 ℃ (500 ℉). Ihe nkiri ihe nkiri PTFE gụnyere teepu ihe nkiri PTFE extruded na teepu ihe nkiri PTFE.

PTFE extruded teepu ihe nkiri nwere ihe na-adịghị mma na nke abrasion na-eguzogide, na-eme ka ọ bụrụ ihe mgbochi ngwa ngwa n'etiti ihe odide ebe nrụgide na mgbanwe okpomọkụ.

PTFE extruded teepu ihe nkiri na-enyere aka belata esemokwu na mkpọtụ igwe. Tụnyere nkịtị PTFE skived film teepu na ahịa, anyị PTFE skived film teepu ọrụ ogologo n'okpuru elu okpomọkụ na-adịghị ahapụ ihe fọdụrụ nrapado mgbe peeling apụ mgbe ojiji.

Atụmatụ nke teepu ihe nkiri PTFE

1, elu okpomọkụ na-eguzogide. Na-eguzogide nhazi okpomọkụ nke 260 degrees Celsius.

2, iji wepụ ntụpọ: elu ahụ dị nro, ọ dịghị mfe ijide ihe ọ bụla. Ọ dị mfe ihicha ụdị mmanụ ọ bụla, ntụpọ ma ọ bụ ihe mgbakwunye ndị ọzọ etinyere n'elu ya; Tapawa, resin, agba na ihe fọrọ nke nta ka ọ bụrụ ihe nrapado niile nwere ike wepu ya;

3, kemịkalụ kemịkalụ sara mbara: nguzogide kemịkalụ dị mma karịa ọtụtụ ọla dị oke ọnụ ahịa.

4, eletriki kwụsie ike: niile ụdị okpomọkụ na iru mmiri dielectric Njirimara bụ nnọọ kwụsiri ike.

5, na arụmọrụ mkpuchi dị elu, mgbochi ultraviolet, mgbochi static.

6, iru mmiri dị ala.

7, dị mfe iji, ogologo ọrụ ndụ.

Ngwa nke teepu ihe nkiri PTFE

1. N'ihi na nri na ọgwụ plastic nkwakọ ụlọ ọrụ okpomọkụ akara ọnwụ igwe na elu na-agba okpomọkụ akara igwe.

2. All di iche iche nke dryer ihicha cylinder elu mgbochi osisi ọgwụgwọ;

3. Ọgwụgwọ mgbochi n'elu n'elu cylinder ihicha nke laminator;

4. Ngwọta mgbochi mgbochi nke roller ndu na pịa elu elu;

5. Akwụkwọ mpempe akwụkwọ ihicha cylinder elu mgbochi osisi ọgwụgwọ;

6. Ụdị ndị ọzọ nke workpiece elu mgbochi nrapado, mgbochi osisi agba, belata ngwa nke esemokwu.

ptfe ihe nkiri teepu ptfe ihe nkiri nrapado teepu PTFE nrapado teepu

Nka nka nke PTFE Fi lm teepu

Usoro	Nọmba akụkụ	Agba	N'ozuzu Ọkpụrụkpụ (mm)	ọkọlọtọ Obosara (mm)	Ibu akwa gram (g/ ㎡)	Ike Tensile (N/25mm)	Adhesion 180 ° bee (N/25mm)	mebiri emebi Voltaji (Kv)	Antistatic Ndepụta
M	M006H	Agba ntụ	0.06	300	120	60	5	8	-
	M006BK	Nwa	0.06	300	120	60	5	-	10^7-10^5
	M008H	Agba ntụ	0.08	300	150	90	6	10	-
	M008BK	Nwa	0.08	300	150	90	6	-	10^7-10^5
	M013H	Agba ntụ	0.13	420	260	160	8	15	-
	M013BK	Nwa	0.13	420	260	160	8	-	10^7-10^5
	M013W	Ọcha	0.13	600	260	160	8	15	-
	M018H	Agba ntụ	0.18	600	350	250	9	18	-
	M018BK	Nwa	0.18	600	350	250	9	18	10^7-10^5

Mmekọrịta & Omenala

Onye nrụpụta teepu ihe nkiri PTFE

Aokai PTFE na-elekwasị anya n'inye akwa PTFE mkpuchi fiberglass dị elu yana ọkwa ọrụ dị mma. Anyị bụ ndị ọkachamara PTFE mkpuchi fiberglass ákwà ndị na-emepụta ihe ga-enyere gị aka na mpaghara ndị a: ihe ndị bụ isi, àgwà ngwaahịa agwụla, nnyefe, na ọrụ mgbe-ahịa. Aokai na-enye gị n'ùkwù, nhazi, imewe, nkwakọ ngwaahịa, ngwọta ụlọ ọrụ na ọrụ OEM OBM ndị ọzọ. Anyị ọkachamara R & D otu, mmepụta otu, àgwà nnyocha otu, teknuzu ọrụ otu, na tupu ahịa & mgbe-sales ọrụ otu ga-enye gị a otu nkwụsị ọrụ, zọpụta oge gị na hụ na kasị ọkachamara ngwaahịa àgwà.

Ebe ịzụta PTFE Fi lm teepu?

Akụkọ PFTE Adhesive Tape REACH

Akụkọ PTFE Adhesive Tape ROHS

Ọ bụrụ na ị nwere ajụjụ ọ bụla gbasara PTFE F ilm Tape , ptfe film adhesive teepu , biko egbula oge ịkpọtụrụ anyị na mandy@akptfe.com . Anyị ga-enye nkọwa zuru ezu na nkwado teknụzụ gbasara njirimara ngwaahịa, nkọwapụta, ngwọta na nhọrọ nhazi ... Nabata gị ileta ụlọ ọrụ anyị!

Maka ajụjụ ma ọ bụ ịnye iwu, biko kpọtụrụ anyị.

Q Enwere m ike ịtụ obosara ma ọ bụ ogologo ahaziri iche?

A Ee. Anyị na-enye obosara omenala, ọkpụrụkpụ, na ogologo mpịakọta ka dabara na usoro gị. Kpọtụrụ ndị otu ahịa anyị na nkọwapụta gị yana ọnụọgụ achọrọ.
Q Olee otu m ga-esi chekwaa ma jikwaa teepu ahụ?

Ụlọ ahịa n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na isi mmalite okpomọkụ. Zere ikpughe mmiri ruo ogologo oge. Debe akwụkwọ mpịakọta ahụ na nkwakọ ngwaahịa mbụ ya mgbe ọ naghị eji ya.
Q Gịnị bụ ahụkarị oge ndu?

A Standard ngwaahịa ụgbọ mmiri n'ime 7 azụmahịa ụbọchị mgbe iji nkwenye; nhọrọ omenala nwere ike iwe ogologo oge. Anyị ga-akwado gị na ị ga-enwe oge ndu n'usoro.
Q bụ silicone nke dabere, acrylic, silicone-acetate?

A The nrapado bụ silicone dabeere, Otú ọ dị, ahịa nwere ike hazie acrylic teepu dabeere na teepu, nke na-enye elu adhesion.
Q Gịnị bụ ihe dị iche n'etiti PTFE silicone teepu na PTFE acrylic teepu?

A
arụmọrụ okpomọkụ

● Ihe nrapado silicon:

Nkwụsi ike dị elu nke oke okpomọkụ ma na-anọgide na-agbanwe na obere okpomọkụ; adabara thermal ịgba ígwè na gaskets / akàrà.

● Ihe nrapado acrylic:

Ezigbo arụmọrụ okpomọkụ n'ozuzu ma n'ozuzu adịghị agbanwe agbanwe dị ka silicone; nwere ike na-esiwanye ike na oke okpomọkụ ma ọ bụ dị nro na oke okpomọkụ.

Nguzogide kemịkalụ na gburugburu ebe obibi

● Ihe nrapado silicon:

Iguzogide oke mmiri, imikpu mmiri, ikpughe UV (maka n'èzí), na ọtụtụ kemịkalụ; na-ejigide elasticity.

● Ihe nrapado acrylic:

Ezigbo kemịkalụ na nguzogide UV maka ọtụtụ gburugburu mana ọ na-adịkarị obere mgbanwe karịa silicone; nguzogide ihu igwe na-adabere n'usoro.

Mgbanwe vs isi ike

● Ihe nrapado silicon na PTFE:

Na-agbanwe agbanwe karị, nwee ike ịnabata mmegharị, ịma jijiji na mgbasawanye ọkụ na-enweghị atụfu akara.

● Acrylic nrapado na PTFE:

Na-esikarị ike; njide mmalite siri ike mana mgbaghara dị obere na mmegharị; mma maka nke siri ike, elu-tack agbụ.

Ngwaahịa ndị emetụtara

Uhie PTFE teepu

teepu PTFE ọcha

Akụkọ metụtara

[PTFE nrapado teepu ] Olee otú iji hụ na organic silicone nrapado enweta lekwasịrị agwọ ọrịa ogo site kenha akara ọsọ nke mkpuchi igwe na oven ogologo maka elu-okpomọkụ teepu PTFE?

Isiokwu a na-ekpuchi otú dakọtara mkpuchi igwe akara ọsọ na oven ogologo iji hụ na organosilicon nrapado ruru lekwasịrị curing ogo maka elu-okpomọkụ PTFE teepu. Ụkpụrụ kwekọrọ n'isi: ngụkọta oge obibi t_total = ogologo oven dị irè L ÷ ahịrị ọsọ v ga-abụrịrị obere oge ọgwụgwọ achọrọ. Nweta njirimara ọgwụgwọ site na DSC ma ọ bụ nrapado ọgwụgwọ ule na-ewepụta mmekọrịta 'okpomọkụ - opekempe ọgwụgwọ oge' mmekọrịta. Nkwekọrịta ọgwụgwọ nhata: kewaa oven n'ime mpaghara, gbakọọ ti = Li/v na tcure(Ti), hụ ∑(ti/tcure(Ti)) ≥1. Usoro ngụkọ: tọọ mpaghara okpomọkụ nwere ogologo Li na okpomọkụ Ti; setịpụ ọsọ ahịrị v, gbakọọ oge obibi mpaghara ọ bụla na oke onyinye; megharịa ruo mgbe ngụkọta ≥1 (oke nchekwa 1.1-1.2 tụrụ aro).
[PTFE nrapado teepu ] Ọdịiche dị na Mmetụta Infrared Radiation Heating na Hot Air Circulation Heating Methods on Uniformity of Cross-Linked Structure of Organosilicon Adhesive Layers.

Isiokwu a na-atụnyere iche n'etiti infrared radieshon kpo oku na-ekpo ọkụ-ikuku mgbasa kpo oku ụzọ on crosslinked Ọdịdị uniformity nke silicone nrapado n'ígwé. Usoro nnyefe ọkụ: ikuku na-ekpo ọkụ na-adabere na convection-conduction na ịrị elu okpomọkụ dị nro, obere ọdịiche dị n'ime / mpụta; IR nwere ntakịrị omimi ntinye ya na nnabata elu siri ike (iri na iri na narị micrometers) na-eke gradient dị elu-ruo n'ime. Mmetụta dị na crosslink uniformity: ikuku na-ekpo ọkụ na-enyere aka ịgwọ ọrịa n'ime na n'èzí na njupụta crosslink otu; IR na-eme ka oyi akwa dị n'elu na-etolite ngwa ngwa 'ihe nkiri akpụkpọ ahụ' nke na-egbochi mmeghari okpomọkụ na imegharị agbụ dị n'ime, na-emepụta njupụta njikọ njikọ na-agbada site n'elu ruo n'ime.
[PTFE nrapado teepu ] Kedu ihe bụ ọnụọgụ ọnụọgụ n'etiti ntinye akwụkwọ ntanye gel nke ihe ntanye na-emetụta nrụgide silicone na ike jikọtara ọnụ nke oyi akwa nrapado?

Edemede a na-ekpuchi akwụkwọ ozi ọnụọgụ n'etiti akụkụ jel na ike jikọrọ ọnụ na nrapado nrụgide silicone maka teepu Teflon. Nkeji gel = oke pasentị nke netwọk njikọ ejikọtaghị ya na toluene ( mmịpụta Soxhlet, 24hr). Ike jikọtara ọnụ nke ejiri ike na-ejide oke okpomọkụ (180 ° C, 1kg). Oke atọ: n'okpuru ebe dị oke egwu (<60%) - enweghị netwọkụ na-eme mkpọtụ, na-ejide ike dị nso efu; dị irè (60-85%) - ike na-ejikọta ọnụ na-eto ngwa ngwa site na mpempe gel, 60% → 70% na-ebuli oge site na nkeji ruo awa, 70% → 80% na-enye mmụba 3-10x; elu crosslinking (> 85%) - enweta ngwa ngwa (85% → 95% naanị 20-50% na-abawanye), tack na-adaba nke ọma,> 95% na-efunahụ ihe PSA.
[PTFE nrapado teepu ] Kedu ka okpomọkụ decomposition na ọkara ndụ nke peroxide crosslinking agents ga-adaba na windo usoro ọgwụgwọ maka Teflon teepu?

Isiokwu a na-ekpuchi otu esi ejikọta okpomọkụ decomposition na ọkara ndụ nke peroxide crosslinking agents (BPO na DCP) na windo usoro ọgwụgwọ maka Teflon teepu. Isi data: BPO - 1-min ọkara ndụ na ~ 131 ° C, 1-hr na ~ 92 ° C, 10-hr na ~ 72 ° C; DCP — 1-min na ~171°C, 1-hr na ~135°C, 10-hr na ~115°C. Echiche dabara adaba: nrapado chọrọ 97-99% crosslinking = 5-7 ọkara ndụ; oge ọgwụgwọ = 5-7 × ọkara ndụ na ọnọdụ okpomọkụ. Back-gbakọọ okpomọkụ site na mmepụta ahịrị obibi oge ma ọ bụ azụ-gbakọọ oge site na kacha ekwe okpomọkụ.
[PTFE nrapado teepu ] Kedu ihe dị iche na mmetụta nke ikpo ọkụ infrared radieshon na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na ịdị n'otu nke njikọ njikọ nke oyi akwa silicone?

Isiokwu a na-atụnyere iche n'etiti infrared radieshon kpo oku na-ekpo ọkụ-ikuku mgbasa kpo oku on crosslinked Ọdịdị uniformity nke silicone nrapado oyi akwa. Usoro mbufe ọkụ: ikuku na-ekpo ọkụ bụ convection-convection, dị nwayọọ ma na-aga n'ihu, na-emepụta gradient okpomọkụ na-agafeghị oke; IR bụ mmịpụta radieshon nwere oke mmịfe elu (micrometers ruo millimeters) na-eke gradient dị elu-ruo n'ime. Mmetụta na nkesa njupụta crosslink: ikuku na-ekpo ọkụ na-enye ohere ka akụkụ nke ime na mpụta banye n'ime oke okpomọkụ nke fọrọ nke nta ka ọ bụrụ n'otu oge, na-emepụta njupụta crosslink otu na oke; IR na-eme ka oyi akwa dị n'elu gwọọ ozugbo na-etolite akpụkpọ anụ nke na-egbochi nnyefe okpomọkụ, na-ebute gradient dị nkọ nke njupụta crosslink na-ebelata site na elu ime.