: +86 13661523628      : Di wan dɛn we de wok fɔ di kɔmni. mandy@akptfe.com      : +86 18796787600       : Di wan dɛn we de wok fɔ di kɔmni. vivian@akptfe.com
Please Choose Your Language
Di PTFE prodakt dɛn we gɛt ay kwaliti
Kraft fayn fayn prɔdak dɛn wit sɛns
RID MƆ TIN DƐN
PTFE Adhesive Tape,PTFE Belting,PTFE Kot Fabrik ...
 
 
RID MƆ TIN DƐN
baner-3
WI PRODƆKT DƐN
Wi kɔmni kin gi 8 prodak siriɔs inklud PTFE Adhesive Tape, PTFE Mesh Bɛlt, PTFE Kɔnvaysɔ Bɛlt, ɛn PTFE Kɔt Fabrik, ɛn ɔda wan dɛn pas 100 kayn polima industrial fabrik kɔmpɔzit matirial dɛn.
  • PTFE Adhesive Tep we yu kin yuz
  • Fabrik we dɛn kɔt wit PTFE
  • PTFE Konvayrɔ Bɛlt
  • PTFE Mesh Belt we yu kin yuz
  • Fabrik we dɛn mek wit silikon
  • PTFE Membran we de mek yu gɛt
MAKƐT DƐN



  • Ilɛktronik industri
  • Erospɛs industri
  • Kεmikכl industri
  • Enaji industri
  • Kabon fayba industri
  • Otomotiv industri
ABOUT AOKAI
Aokai, Chaina profeshɔnal PTFE prodak manufakchurin & kɔstɔmayshɔn spɛshal, de gi kɔmprɛhɛnsif industri sɔlvishɔn fɔ aerospace, kabɔn fayba, ɔtomotiv, kemikal
...
RID MƆ  
20000
m 2
Di eria we di kɔmni de
1800000
m 2
Kapasiti fɔ ɛni ia
100
+
Material dɛn we de fala di polima
Testing of PTFE prodakt dɛn
Aokai gɛt prɛsis tɛst inschrumɛnt ɛn strikt kwaliti inspekshɔn fɔ mek shɔ se ay kwaliti PTFE prɔdak dɛn.
  • Ay ɛn lɔw tɛmpracha rɛsistɛns
    Di ays tɛmpracha kin rich 300 ° C.
    Ay ɛn lɔw tɛmpracha rɛsistɛns
    Di ays tɛmpracha kin rich 300 ° C.
  • Stika ɛn stik
    I gɛt bad bad tin fɔ du pan ɔl di tin dɛn, ivin di tin dɛn we de adhesive.
    Stika ɛn stik
    I gɛt bad bad tin fɔ du pan ɔl di tin dɛn, ivin di tin dɛn we de adhesive.
  • I nɔ kin tear
    We dɛn yuz kɔmpɔzit matirial dɛn, dɛn dɔn rili ɛp fɔ mek i nɔ ebul fɔ kray.
    I nɔ kin tear
    We dɛn yuz kɔmpɔzit matirial dɛn, dɛn dɔn rili ɛp fɔ mek i nɔ ebul fɔ kray.
  • we nɔ de west
    I nɔ kin izi fɔ mek i rɔtin ɛn ɔyl kin go insay.
    we nɔ de west
    I nɔ kin izi fɔ mek i rɔtin ɛn ɔyl kin go insay.
  • we nɔ de mek wata pas
    I kin mentɛn stebul pefɔmɛns na difrɛn humid ɛnvayrɔmɛnt dɛn.
    we nɔ de mek wata pas
    I kin mentɛn stebul pefɔmɛns na difrɛn humid ɛnvayrɔmɛnt dɛn.
  • I nɔ de mek ɔyl
    Di strɔkchɔ tayt ɛn di ɛnaji we de ɔp di wɔl nɔ bɔku, we de mek i nɔ izi fɔ mek ɔyl go insay in insay.
    I nɔ de mek ɔyl
    Di strɔkchɔ tayt ɛn di ɛnaji we de ɔp di wɔl nɔ bɔku, we de mek i nɔ izi fɔ mek ɔyl go insay in insay.

LƐTƐST NYUZ

Chek wi nyus fɔ no mɔ bɔt Aokai Nyu Matirial.
PTFE_Fabrik_Kεmikכl_Rεsistεns.png
  • 21
  • Julay
Wetin na di tipik layn spid rɛnj fɔ wan Teflon ay-tɛmpracha fabrik impregnashɔn prodakshɔn layn?

Dis atikul kɔba tipik layn spid rɛnj fɔ Teflon ay-tɛmpracha fabrik impregnashɔn prodakshɔn layn. Spid rεnj: kכvεshכnal tin prodakt (0.08-0.30mm) na 0.5-3 m/min, stebul na 1-3 m/min; tik/mכlti-impregnated prodakt (≥0.4mm) na 0.3-1 m/min; ay-efyushɔn layn dɛn wit lɔng ɔvin kin rich 3-6 m/min bɔt dimand ikwipmɛnt. di prכsεs kכnstrakshכn: drying εn sintering nid fכ rεsidεns tεm (PTFE nid 1-3 min na 380-400°C; insufisεnt de mek pwεl adheshon/krak); spid de ditarmin bay di minim dry/sintering tεm כnda fiks כvin lεngth. Matirial kɔnstrakshɔn: ay sɔlid/viskɔsiti dispershɔn dɛn de go insay sloslo; tik/dεns klos dεm de abzכp likwid εn tכn di כt sכmtεm sכmtεm; wayd klos dεm we kin protεns fכ ed-sεntr kכla difrεns we nid fכ ridyus spid. Ikwipmɛnt ɛn kwaliti tred-ɔf: lɔng mɔlti-zon ɔvin dɛn de alaw fɔ spid mɔ.

View More

tear&krisfabrik.jpg
  • 21
  • Julay
Wetin na di difrεns bitwin PTFE emulshכn dεm we difrεn polimכrayzeshn prכsεs dεm de prodyuz (sכspεns polimכrayzeshn εn dispershכn polimכrayzeshn)?

Dis atikul de kכba difrεns bitwin PTFE emulshכn dεm we dεn prodyuz bay sכspεns polimεrayzeshn vs dispershכn polimεrayzeshn. Klarifyeshɔn: suspɛns polimayzeshɔn nɔ kin ebul fɔ prodyuz PTFE ɛmulshɔn dairekt wan; jεnuin PTFE emulshכn de kכmכt כnli frכm dispershכn polimεrayzeshn. 'Sɔspenshɔn-mɛtɔd ɛmulshɔn' na rili akyuɔs sɔspɛns fɔ grɔn sɔspɛns-pɔlimɛrayz rɛsin maykropauda dɛn. Dispershכn polimεrayzeshn (primary emulshכn): sfεrik patikyula dεm (0.1-0.3μm, narכw distribushכn), we dεn stεbyul bay pεrfluorinated sכfaktant dεm, εkstrim hεy mכlikul wet (>94% kristaliniti), strכng fibrilεshכn, nid 380°C sintering fכ fכm kכntinyu tכf film.

View More

Fabrik_Fleksibiliti_Tɛst_Chart.png
  • 21
  • Julay
Di inflכεns כf platinכm katalis tכyp εn kכnsantreshכn pan di kכroslink kinεtiks כf adishכn-kכr silikon rכba

Dis atikul de egzamin inflכεns pan platina katalis tכp εn kכnsantreshכn pan kכroslink kεnεtiks fכ adishכn-kכr silikon rכba. Katalis tכp dεm: Speier katalis (kloroplatinik asid, Pt4+) nid fכ ridyus to aktv lכw-valεnt spεshal, we de fכnshכn lεk prεkatalis; Karstedt katalis (Pt0 wit divinyltetramethyldisiloxane) de enta katalis saykl dairekt wan. Tayp ifekt dεm: Speier sho pronכns indukshכn pεriכd wit S-shεp kכryכn kכv (slow εli, aksεlεrayt leta) εn hכy apεrεnt aktibכshכn εnεji; Karstedt sho se nכ indukshכn, hεy initial rεt wit shap εksotεm, lכw aktibכshכn εnεji.

View More

Aokai PTFE, we de na di wɔl
Jiangsu Aokai Nyu Matirial
AoKai PTFE na profeshɔnal PTFE Coated Fiberglass Fabric Manufacturers ɛn spɔlayt dɛn na Chaina, spɛshal fɔ gi PTFE Adhesive Tep we yu kin yuz, PTFE Konvayrɔ Bɛlt, PTFE Mesh Bɛlt we de na di . Fɔ bay ɔ ɔlsay PTFE kɔt fayv glas fabrik prodak. Bɔku bɔku wit, tik, kɔlɔ dɛn de we dɛn kɔstɔmayt.

KWƐK LINK DƐN

DI KATEGORI FƆ DI PRODƆKT

KONTAKT WI
 Adrɛs: Zhenxing Rod,Dasheng Indastrial Pak,Taixing 225400, Jiangsu,Chaina
 Tɛl:  +86 18796787600 yu kin yuz am
 Imel: Imel:  vivian@akptfe.com
Tɛl: +86 13661523628 yuz am
   Imel: Imel: mandy@akptfe.com
 Wɛbsayt: www.aokai-ptfe.com we de na di wɛbsayt
Kopirayt ©   2024 Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd. Ɔl di rayt dɛn de fɔ yuz Sitemap fɔ di sayt