The Chemical Industry-a PTFE High-Temperature Fabric: A hmanna pawimawh 7

Chemical plant hi boruak khirh tak – acid chak tak, alkalis lum, corrosive solvent, temperature sang, leh sticky residue te an ni. Thil hmanrua te chu beih a do tur a ni a, a faiin a awm tur a ni a, rintlak takin a thawk tur a ni.

PTFE high-temperature fabric (PTFE-coated fiberglass) hi heng harsatnate tan hian a danglam bik hle. Chemical inertness, temperature range zau tak (-70°C atanga 260°C), non-stick surface, leh dimensional stability te a inzawm khawm a ni.

Aokai PTFE hian kum sawm tam tak chhung chu chemical plant-ah PTFE fabric hi a lo supply tawh a ni. A hnuaia tarlan te hi PTFE fabric hian traditional materials aiin a performance pawimawh ber pasarih a ni.

Sealing leh Pipeline Lining – Gasket leh Inner Liner te

Chemical service-a pipe, valve leh pump te hian corrosive fluids an tuar chhuak tur a ni. PTFE fabric hian solution pahnih a pe a.

1. Flange leh valve gasket te

PTFE puan hi pipe flange, valve bonnet, leh pump joint atan gasket-ah an cut a. Rubber gasket solvent-a a hring emaw a chhe emaw ang lo takin PTFE hi a inert reng a ni. Acid chak tak (sulfuric, nitric, hydrochloric), alkalis chak tak (sodium hydroxide), leh organic solvent (toluene, acetone, MEK) te lakah a seal a ni.

2. Pipeline leh reactor linings te

PTFE fabric hi carbon steel emaw FRP pipe emaw chhung lam bang-ah bond theih a ni a, corrosion-resistant lining angin a thawk thei a ni. Friction a tihziaawm bakah pipe wall-a material awm zat a veng bawk – viscous emaw sticky chemicals hmanna atan a pawimawh hle.

Thil hmanrua atana hman tur Anti-Corrosion Lining – Reactor, Tank, Centrifuges

Chemical reactor, agitator, storage tank leh centrifuge te hi carbon steel emaw stainless steel emaw hmanga siam a ni fo thin. Corrosive chemicals nena direct contact hian thil siamte chu pitting, cracking leh contamination a thlen thin.

1. Invenna tur isolation layer

Heng vessel chhungril bangte hi lining atan PTFE fabric an hnawih thin. Metal substrate leh chemical medium inkarah barrier angin hna a thawk a, corrosion a veng a, equipment dam chhung kum tam tak a ti rei bawk.

2. Material paih chhuahna atan non-stick benefit

Non-stick surface hian viscous materials (eg, resins, adhesives, slurries) te chu tank wall-ah a innghat lo. Hei hian discharge efficiency a ti tha a, batch inkar a tihfai hun a ti tlem bawk.

3. Metal-ion sensitive hmanga hman tur

Semiconductor chemical siamchhuah emaw, trace metal bawlhhlawh paihna pawm theih lohna chemical tha takah emaw chuan PTFE lining hian metal ion te chu chemical thianghlim tak takah a leach loh nan a veng a ni.

Filtration Materials – Temperature sang tak, Gas & Liquid tihchhiat theihna

Chemical plant hian exhaust gas lum, chhe thei tak tak a siam chhuak a, gas leh liquid te pawh filter a ngai a ni.

1. Flue gas lumna sang tak awmna tur bag-ah filter tur

PTFE puan (PTFE membrane laminate hmanga siam fo thin) hi baghouse dust collector atan filter bag-ah siam a ni. Heng bag te hian:

• lum chhunzawm zel 260°C thlenga

• Gas chhe thei tak tak (HCl, SO1, HF, dioxins) te .

• Leivut hnim hring (carbon black, resin powder) 10. A rilru a hah lutuk chuan a rilru a buai em em a.

PTFE-a non-stick surface hian dust caking a veng a, pulse-jet cleaning hmangin low pressure drop a awm leh thei a ni. Emissions <1 mg/Nm⊃3 thlenga hniam; tih theih a ni.

2. Press puan chu a viscous materials te chu filter la

Liquid-solid inthenna atan chuan PTFE fabric hi plate-and-frame filter press-ah filter puan angin a thawk a ni. Filter cake hian a chhuak fai a, puan pawh silfai a awlsam bawk – downtime leh labor a ti tlem.

Anti-Corrosion Flexible Joints – Duct siamna atana hman tur expansion Joints

Chemical plant-a ventilation duct leh flue-te hian thermal expansion, vibration leh misalignment an tawk thin. Corrosive gas te pawh an keng tel bawk.

1. Metallic ni lo expansion joint te

PTFE fabric hi duct section inkar expansion joint-ah flexible element atan hman a ni. Pipeline movement a compensate rualin acid fume leh temperature sang atanga attack a do bawk. Rubber bellow ang lo takin PTFE hi UV emaw ozone emaw ah a chhe lo.

Anti-Adhesion Isolation Materials – Welding Pads leh Release Liners te hman a ni

Thil hmanrua siam leh enkawl lai hian PTFE puan hian duh loh zawnga adhesion lakah a venghim a ni.

1. Welding splash pads hmanga siam a ni

Sensitive equipment emaw, finished surface emaw bula welding kan tih hian PTFE fabric hi splash-proof pad angin dah a ni. Weld spatter hi PTFE-ah a innghat lo – a bounce off mai emaw, a wipe chhuak thei emaw a ni. Hei hian tihfai leh chhiatna man to tak tak a veng thei a ni.

2. Temperature sang taka tihdam nan puan chhuah tir

Resin, rubber, leh composites, temperature sang taka tihthianghlim ngai (eg, epoxy, phenolic, silicone rubber) siamnaah hian PTFE puan hi release liner emaw conveyor belt emaw atan hman a ni. Cured material chu belt emaw mold emaw-ah innghat lovin a chhuak fai hle.

Composite Molding atan puan chhuah tir rawh

Fiberglass reinforced plastic (FRP), rubber products leh composite dangte chu lum leh pressure hnuaiah an siam a ni. Release layer awm lovin a siam zawh tawh chu mold-ah a bond a ni.

1. Demolding leh a chunglam texture

PTFE fabric hi mould leh composite layup inkar ah dah a ni. Curing hnuah demolding awlsam tak a siam a, fabric weave a zirin uniform, smooth emaw textured surface finish a pe thei bawk. PTFE fabric hi cycle tam tak atan hman nawn theih a ni a, single-use release film thlaktu a ni.

Electrical leh Thermal Insulation – Electrode leh Pipe-a hman tur wraps

Chemical workshop-ah hian electrical component leh hmun lum, venhimna mamawh a awm a.

1. Electrode leh heater te tan electric insulation

PTFE puan hian dielectric property tha tak a nei a (dielectric constant <2.6, volume resistivity sang tak a nei). PVC emaw rubber insulation pangngai a tihchhiat theihna hmuna corrosive environment-a electrode, bus bar leh electric heating element-te tana wrapping insulation atan hman a ni.

2. Thil hmanrua leh pipeline-a hman tur thermal insulation wrapping

PTFE puan hi thermal insulation blanket atan outer wrap atan hman theih a ni. Chemical paih a do thei a, tihfai a awlsam a, insulation mamawhna hmunah chuan temperature sang tak a tuar thei bawk.

Thupui – Chemical Plant-a PTFE Fabric hi a pawimawh chhan

Aokai PTFE hian chemical industry-a hman tur PTFE high-temperature fabric thickness hrang hrang, weaves, leh FDA/UL grade hrang hrang a siam thin a ni. I chemical environment bik, temperature range, leh hmanrua chi hrang hrang sawiho turin min rawn biak theih reng e.

A chunga kan tarlan te hi Jiangsu Aokai thil thar siam chhuahna Co., Ltd.

Kan full product line atana detailed specification, application scenario leh customized solutions hriat belh i duh chuan, PTFE high-temperature fabrics, PTFE high-temperature tapes, PTFE mesh belts, seamless bonding machine belts, single-sided PTFE cloth, high-temperature resistant conveyor belts leh high-temperature resistant fiberglass te pawh a tel fabrics, min rawn biak theih reng e:

• Pu Guo-a chuan: +86 18944819998 biak theih a ni

• Pu Liu-a chuan: +86 13705266308 biak theih a ni

Professionalism leh integrity philosophy kan zawm reng a, one-stop solution leh ngaihtuahna senga service pek che kan tum bawk.