Layini teliya hakɛ danmadɔ ye mun ye Teflon finimugu min bɛ kɛ ni funteni caman ye, o ye mun ye?

I. Layini teliya sigicogo caman

1. Fɛn finmanw (milimɛtiri 0,08–0,30) .

   A ka ca a la, a bɛ kɛ ka fɛnw dilan Teflon fibreglasi fini bɛ baara kɛ ka sabati ni mɛtɛrɛ 1–3 ye miniti kɔnɔ, a bɛɛ lajɛlen bɛ se mɛtɛrɛ 0,5–3 ma miniti kɔnɔ.

2. Fɛn minnu ka bon walima minnu falen don caman na (≥0,4 mm) .

   Olu bɛ kɛ sababu ye ka impregnation–drying–sintering cycles caman kɛ, ni layini teliya bɛ dɔgɔya tuma caman na ka se 0,3–1 m/min ma.

3. Fɛn dilanni sira minnu bɛ baara kɛ kosɛbɛ, minnu bɛ ni foro janw ye

   Ni foro janya ni funteni yɔrɔw bɛ se, teliya bɛ se ka bonya ka se mɛtɛrɛ 3–6 ma miniti kɔnɔ, nka o bɛ ɲinini caman kɛ minɛnw kan.

II. Taabolo waati: Jalen ni sɔgɔli gɛlɛya gɛlɛnw

1. Nafa minnu bɛ sɔrɔ jalenbaliya fɛ

   Ni fini donna sɔgɔsɔgɔninjɛ yɔrɔ la min funteni ka bon ni ji tolen ye, ji bɛna tobi kosɛbɛ, ka bugunw, pinɛw ani nɔ finmanw lawuli. Fini ka kan ka fɔlɔ ka ja ka ɲɛ 100–250°C la.

2. Wajibiya sigiyɔrɔma waati sintering kama

   PTFE fɛnɲɛnamafagalanw ka kan ka wuli ka kɛ filimu ye 380–400°C la, a ka c’a la, a bɛ miniti 1–3 sigi waati de wajibiya—o ka jan finimugu gɛlɛnw na. Waati dafabaliya bɛna kɛ sababu ye ka nɔrɔli jugu ni a kari.

3. Teliya plafond jukɔrɔ foro janya jɔlen

   Ni foronto janya bɛ to sen na, layini teliya bɛ dɔn k’a ɲɛsin waati fitinin ma min bɛ kɛ ka ja ni sɔgɔli kɛ. O de ye gɛlɛya jɔnjɔn ye min ka bon kosɛbɛ.

III. Fɛnɲɛnɛmaw cogoyaw ni taabolo paramɛtiriw bɛnni

1. Impregnation solides hakɛ ni u sɔgɔli

   Dispersions minnu bɛ ni solides (fɛn gɛlɛnw) ka ca ani viscosité (jibɔlan) caman bɛ minnu na, olu bɛ don ka don dɔɔni dɔɔni. Layini teliya kojugu bɛna kɛ sababu ye ka finimuguw ta cogo kelen na, o bɛ na ni jiriw ye walima ka sɔgɔsɔgɔ.

2. Coating thickness ani impregnation tɛmɛsira hakɛ

   Ni impregnation pass kelen bɛ kɛ ni coating finman ye, layini teliya bɛ se ka caya kosɛbɛ. Fɛn minnu bɛ tɛmɛsira caman wajibiya walasa ka u bonya bonya, teliya ka kan ka labɛn ka ɲɛ tɛmɛsira kelen-kelen bɛɛ la, ni tɛmɛsira laban bɛ boli dɔɔnin dɔɔnin walasa ka se ka kɛ nivoya ɲuman ye.

3. Finimugu janya ni a bonya

   Fibreglasi finimugu gɛlɛnw ni finimuguw bɛ ji minɛ ka funteni bila dɔɔni dɔɔni, o bɛ ja ni sɔgɔli waati janya. A ka gɛlɛn ka finimugu janw sumaya cogo kelen na, o bɛ kɛ sababu ye tuma caman na, o bɛ kɛ sababu ye ka kulɛriw danfara bɔ u dawolo ni u cɛmancɛ cɛ, o bɛ kɛ sababu ye ka teliya dɔgɔya.

IV. Minɛnw seko ni u jogoɲumanya wajibiyalenw balansi

1. Foro janya ni a funteni hakɛ cogoya

   Foro jan minnu dilannen don ni yɔrɔ caman ye, olu bɛ se ka funteni waati nafama janya kosɛbɛ, o bɛ sira di layini teliya ma. Foro surun kɔrɔw bɛ se ka boli ni mɛtɛrɛ 1–2 dɔrɔn ye miniti kɔnɔ.

2. So funteni baarakɛcogo ɲuman ani sɔgɔsɔgɔninjɛ seko

   Fiɲɛ sumalen jiginni ni infirɛri yɔrɔjan dɛmɛni bɛ se ka jalen ni sɔgɔli teliya. Fiɲɛ bɔli jugu bɛ kɛ sababu ye ka watara minɛ, o bɛ na ni dugukolo sanfɛla nafamafɛnw ye ani ka baara wajibiya ni teliya dɔgɔyali ye.

3. Jagokɛyɔrɔw yecogo ɲuman sariyaw la

   Ni Teflon fini min ka funteni ka bon, o bɛ fɛn ɲɛfɔcogo gɛlɛnw de wajibiya—pinɛw, bugunw, kariw, ani u janya muɲuni gɛlɛnw tɛ yen—teliya dɔgɔyali ka kan walasa ka sɔrɔ hakɛ caman sɔrɔ, o bɛ kɛ sababu ye ka layini teliya sigicogo kɛ fɛn ye min bɛ se ka mara kosɛbɛ.

--- .

Kunnafoni minnu bɛ sanfɛ, olu bɛ di Jiangsu Aokai Kura Materiel Teknoloji Co., Ltd.

N’aw b’a fɛ ka kunnafoni caman sɔrɔ an ka fɛn dilannenw bɛɛ lajɛlen ka fɛn ɲɛfɔlenw kan, u kɛcogo, ani u ladilancogo fɛɛrɛw kan—i n’a fɔ Teflon finiw minnu bɛ funteni caman sɔrɔ, Teflon kasɛti minnu bɛ funteni caman sɔrɔ, Teflon kasɛti minnu bɛ funteni caman bɔ, cɛsirilan minnu tɛ siri, PTFE fini minnu bɛ kɛ fan kelen fɛ, fɛnɲɛnamafagalan minnu bɛ funteni caman ta, ani fibreglasi fini minnu funteni ka bon—aw bɛ aw yɛrɛ bila ka kuma an fɛ nin fɛn ninnu sababu fɛ:

Baarakɛyɔrɔ telefɔniw:

- Cɛ Guo : 18944819998

- Cɛ Liu : 13705266308

An bɛ baarakɛcogo hakilila min bɛ tali kɛ baarakɛlaw ni danbe la tuma bɛɛ, wa an cɛsirilen don ka fɛɛrɛw di aw ma yɔrɔ kelen na ani baara min bɛ kɛ ni jateminɛ ye!