PTFE finimugu minnu bɛ funteni caman bɔ, olu bɛ dielektriki fanga caman fara ɲɔgɔn kan (a sabatilen don nɛnɛ kɔrɔ), -70°C fo 260°C funteni hakɛ, diɲɛ bɛɛ ka kemikɛli kɛlɛli (n’a ma fɔ nɛgɛ alkali wulilenw), yɔrɔ min tɛ nɔrɔ (a bɛ kirin bali), ka wuli kɛlɛli (fibreglasi barika bonya ni PTFE saniyalen ye), sɔgɔli fanga caman, sɔgɔsɔgɔninjɛ dɔgɔya (μ=0,05-0,1), ani V-0 tasuma hakɛ. Ni i y’a suma ni mika, lastikuw ani PTFE gazi saniyalenw ye, PTFE fini bɛ se ka fɛn caman sɛgɛsɛgɛ, ka baara kɛ, ani ka a janya sabati waati jan kɔnɔ. A ka ɲi kosɛbɛ transformateurs, moteur insulation, chimique flange sealing, ani semiconducteur minɛnw kama.

PTFE fini min funteni ka bon, o bɛ dilan ni jisuma ye siɲɛ kelen (tɛmɛsira kelen: a bɛ teliya, a musaka ka dɔgɔ, a bɛ kɛ finimugu finman ye, a bɛ kɛ yɔrɔ gɛlɛn ye ni pinɛw ye) walima ni a bɛ kɛ ni ji caman ye (tɛmɛsira 2-3+: finimugu nɔgɔlen, denso, pinɛw tɛ min na, PTFE hakɛ 50-70%, baarakɛcogo ɲuman, musaka ka bon). Single-dip bɛ bɛn gaziw ma minnu ka dɔgɔ, waati dɔɔnin matarafalenw ani fɛnw minnu bɛ ninakili. Multi-dip ka kan ka kɛ dumunikɛminɛnw na, dumunikɛminɛnw na minnu tɛ nɔrɔ, circular substrates high-frequency circuit substrates, kemikoro liners, ani architectural membranes.

Fɛnɲɛnɛma saniya ye PTFE finimugu ɲumanya jusigilan jɔnjɔn ye. Nɔgɔw (daminɛ tolenw, surɔfɛnw, nɛgɛ ionw, bonyalan nɔgɔlenw) bɛ kɛ sababu ye ka funteni tiɲɛni kɛ joona (bulonw, kurukuruw bɛ bɔ 260°C sanfɛ), yɔrɔ minnu tɛ nɔrɔ ɲɔgɔn na (yɔrɔ minnu bɛ nɔrɔ ɲɔgɔn na), kuran sɔgɔli dɔgɔyali (diélectrique bɔnɛ, tiɲɛni tension dɔgɔya), masin fanga dɔgɔyali (degun hakɛ, kari), ani jɛman/ɲɛnabɔli. Fɛnɲɛnɛma minnu saniyalen don kosɛbɛ, olu bɛ FDA ka sariyaw labato, minnu bɛ mɛn, minnu bɛ baara kɛ kosɛbɛ, PTFE fini.

PTFE-coated fibreglas fabric sintering bɛ a minɛ waati tigitigi de wajibiya 370-400°C la. Furaw minnu bɛ to sen na: 30-90s (finman) fo miniti 3-5+ (mugu). Batch forow: miniti 5-15. Sintering under-sintering bɛ kɛ sababu ye ka finiw kɛ minnu tɛ ye, minnu ka gɛlɛn, minnu bɛ bɔ; ni aw bɛ sɔgɔsɔgɔ kojugu, o bɛ kɛ sababu ye ka a jɛ, ka a kari, ani ka gazi fluoride toxic bɔ. Taabolo ɲuman : aw bɛ foro funteni jateminɛnanw kɛ, ka sɛgɛsɛgɛli ɲɛnama kɛ (semi-transparent, flexible), ani ka kaseti sama sɛgɛsɛgɛliw kɛ. Aw bɛ a lajɛ tuma bɛɛ ko funteni dafalen ka kɛ kelen ye.

PTFE fini min funteni ka bon, o bɛ a minɛ ka ɲɛ walasa ka a lakana ani ka a si jan. Fɛn minnu ka kan ka kɛ: aw kana tɛmɛ 260°C kan abada (ni a tɛmɛna 320°C kan, o bɛ sisi toxic bɔ), aw kana kurukuru nɔgɔlenw (a bɛ finimugu kari, ka fibreglasi bɔ kɛnɛ kan), aw kana saniya ni sɔgɔsɔgɔninjɛ ye (nɛgɛ wulu bɛ yɔrɔ tiɲɛ min tɛ nɔrɔ), aw bɛ funteni bonya yɔrɔ mara (a bɛ tigɛli bali), ani ka a bila a nɔ na ni kurukuruw walima u sɔgɔlen don. Magasin wulilen, a yɔrɔ ka jan UV la. Aw bɛ ganw don minnu bɛ funteni bali, aw bɛ u minɛ ni aw bɛ u minɛ.

PTFE fanga ka bon fini min funteni ka bon, o ye fibreglasi ye min bɛ se ka wuli kosɛbɛ ani PTFE fini min bɛ kɛ ka fɛnw datugu. Baara kunbabaw bɛ tali kɛ izini fɛnw lasecogo la (dumuni tobili, fini jalen, PCB ta), welding lakanani (heat-sealer covers, spatter shields), demolding ani hot press forming (rubber molding, PV lamination), kuran insulation (motɛri slot liners, cable wraps), architectural membranes (stade sow, san 30+ ɲɛnamaya), kemikali anti-corrosion (expansion jogindaw, tankiw datugulanw), aerospace (bɔrɔsi sumalenw), ani baara kɛrɛnkɛrɛnnenw (laser tigɛ, 3D sɛbɛnni).

Fibreglasi fini jalen ka kɔn ka ɲɛ, o nafa ka bon kosɛbɛ PTFE dacogo kɔfɛ, resin impregnation, walima lamination. Furakɛli kunbaba saba : ji bɔli 105-120°C la (miniti 10-30 ka kɛɲɛ ni girinya ye), dewaxing/thermal cleaning ni 300-450°C (LOI <0,1%, avoid>500°C), ani ka a sumaya ka kɔn 60-100°C la sani a ka datugu. Aw bɛ foro funteni kelen-kelen (±5°C) kɔlɔsi, ka ji bɔ a la ni fanga ye, ani ka finiw lakana minnu furakɛra ni silane ye 110°C duguma. Aw bɛ fini jalen mara bɔrɔ datugulenw kɔnɔ walima so jalenw kɔnɔ (<30°C, <40% RH).

PTFE fini min bɛ funteni caman na, o baara waati bɛ danfaraba la ka kɛɲɛ ni a kɛcogo ye. Kemikɛli min bɛ kɛ ka sɔgɔsɔgɔninjɛ kɛlɛ, o bɛ se ka mɛn san 3+ (a ka jan siɲɛ 4 ka tɛmɛ lastikuw kan). Dumuni tobilikɛminɛnw bɛ kalo tɛmɛnenw na ni tiɲɛni dɔɔnin ye. Industriw ka conveyor belts bɛ sɛgɛn ka bɔ ɲɔgɔnkanu fɛ. PV lamination (150°C, EVA contact) bɛ si hakɛ danmadɔ sɔrɔ. Furakɛli gɛlɛnw (disiki sɔgɔlenw) si tɛ mɛn. Fɛn minnu ka kan ka kɛ : funteni hakɛ jateminɛni (aw bɛ to ≤260°C la), aw bɛ aw yɛrɛ tanga kurukuruni nɔgɔlenw ma, ka a saniya tuma bɛɛ, ani ka a falen a waati la ni a kurukuru walima ni a jɛra.

PTFE fini min funteni ka bon (fibre de verre PTFE) bɛ mɛn ka tɛmɛ tɔw bɛɛ kan ni a maralen bɛ 260°C duguma, ka a yɔrɔ janya kurukuru nɔgɔlenw na, ani ni a saniyalen don ni baarakɛminɛn nɔgɔlenw ye. Fɛnba minnu bɛ ɲɛnamaya dantigɛ : funteni tiɲɛni ka tɛmɛ 260°C kan, funteni sɔgɔli ka bɔ funteni/nɛnɛ teliya la, masinw ka sɛgɛn ka bɔ a kɔrɔtali ni a tension na, kemikaliya binkanni min bɛ bɔ alkali nɛgɛ wulilenw na walima oksidan barikamaw fɛ, tiɲɛni min bɛ bɔ nɛgɛ sɔgɔlanw na saniya waati, ani UV jirali kɛnɛma baara kama. Coating ni substrate jogo fana nafa ka bon.

PTFE fini min bɛ funteni caman na (fibreglasi min datugulen don ni PTFE ye) ka ɲi kosɛbɛ mikrowɛn sumaya la bawo a bɛ mikrowɛnw ci k’a sɔrɔ a ma fanga minɛ, a bɛ se ka 260°C kɛlɛ, wa a yɔrɔ tɛ nɔrɔ. Baara minnu bɛ kɛ, olu ye mikro-onde tobilikɛminɛnw ye, izini jalen fɛnw laseginlanw, reactorw datugulanw walasa ka kemikɛlifɛnw sɔgɔ, ani mikro-onde popcorn bɔrɔw datugulanw. FDA ka kalasi minnu bɛ sɔrɔ dumuni na.