PTFE ntama a ɛyɛ hyew kɛse hwehwɛ sɛ wɔde ahwɛyiye di ho dwuma na ama wɔahwɛ ahu sɛ ahobammɔ ne nkwa tenten. Ahwɛyiye atitiriw: ntra 260°C da (ɛboro 320°C ma wusiw a awuduru wom fi mu), kwati sɛ ɛbɛbɔ akuturuku a ano yɛ nnam (ɛpaapae ade a wɔde kata so, ɛma fiberglass da adi), nsiesie abrasive biara nni hɔ (dade aboa nhoma sɛe baabi a ɛnyɛ den), sie baabi a ɛhɔ yɛ hyew a ɛtrɛw (ɛmma ɛntetew), na fa foforo si ananmu bere a ɛyɛ akisikuru anaasɛ ɛho ayɛ kurukuruwa no. Store rolled, akyirikyiri fi UV. Hyɛ nsateaa a ɛmma ɔhyew nkɔ mu bere a woredi ho dwuma no.

PTFE ntama a ahoɔden kɛse wom yɛ fiberglass a ɛyɛ den kɛse ne PTFE a wɔde kata so a wɔabom ayɛ. Nneɛma atitiriw a wɔde di dwuma span mfiridwuma mu nneɛma a wɔde fa (aduan a wɔde to, ntama a wɔde twitwiw, PCB akwantu), welding ahobammɔ (ɔhyew-sealer kataso, spatter kyɛm), demolding ne ɔhyew press forming (rɔba molding, PV lamination), anyinam ahoɔden insulation (motor slot liners, cable wraps), architectural membranes (agumadibea dan atifi, 30 + mfe nkwa), nnuru anti-corrosion (ntrɛwmu nkwaa, tank a wɔde kata so), ahunmu (ntama a wɔde hyew nneɛma), ne nneɛma titiriw a wɔde di dwuma (laser twa, 3D tintim).

Fiberglass ntama a wɔde di kan ma ɛyow yiye no ho hia kɛse ma PTFE a wɔde kata so akyiri yi, resin a wɔde bɛhyɛ mu, anaa lamination. Ayaresa atitiriw abiɛsa: nsu a woyi fi hɔ wɔ 105-120°C (simma 10-30 a egyina emu duru so), dewaxing/thermal cleaning wɔ 300-450°C (LOI <0.1%, kwati>500°C), ne preheating wɔ 60-100°C ansa na wɔde akata so. Di fononoo mu hyew a ɛyɛ pɛ (±5°C) so, hyɛ sɛ wɔma nsu fi mu, na bɔ ntama a wɔde silane ayɛ ho ban wɔ 110°C ase. Fa ntama a ayow sie nkotoku a wɔatoto mu anaa adan a ɛyɛ nwunu (<30°C, <40% RH).

PTFE ntama a ɛyɛ hyew kɛse som nkwa nna gu ahorow kɛse sɛnea wɔde di dwuma. Chemical anti-corrosion lining betumi atra hɔ mfe 3+ (4x tenten sen rɔba). Aduan a wɔde to paanoo trays di asram a ɛnsɛe pii. Mfiridwuma mu conveyor belt ahorow no sɛe esiane friction nti. PV lamination (150°C, EVA contact) wɔ nkwa a ɛkɔ fam. Nneɛma a wɔde di dwuma wɔ friction a emu yɛ duru (abrasive discs) mu no nkwa nna tiaa. Nneɛma atitiriw: ɔhyew a wɔhwɛ so (tra hɔ ≤260°C), kwati sɛ wobɛbɔ nsensanee a ano yɛ nnam, wobɛhohoro wo ho daa, na woasesa no bere ano bere a akisikuru anaa ayɛ kɔkɔɔ no.

PTFE ntama a ɛyɛ hyew kɛse (PTFE-coated fiberglass) kyɛ sen biara bere a wɔde sie ase 260°C, akyirikyiri fi nsensanee a ano yɛ nnam, na wɔde nnwinnade a ɛyɛ mmerɛw siesie no. Nneɛma atitiriw a ɛto nkwa ano hye: ɔhyew a ɛsɛe ade boro 260°C, ɔhyew a ɛba esiane ɔhyew/onwini a ɛba ntɛmntɛm nti, mfiri a ɛbrɛ esiane sɛ ɛkotow ne nea ɛtwetwe nti, nnuru a efi alkali dade a ayɛ hyew anaa oxidizers a ano yɛ den mu ntua, dade a wɔde twitwiw nneɛma a ɛsɛe bere a wɔresiesie, ne UV a wɔde di dwuma wɔ abɔnten. Quality of coating ne substrate nso ho hia.

PTFE ntama a ɛyɛ hyew kɛse (PTFE-coated fiberglass) ye ma microwave ɔhyew efisɛ ɛde microwave kɔ a ennye ahoɔden, ɛko tia 260°C, na ɛwɔ soro a ɛnyɛ nea ɛbata ho. Nneɛma a wɔde di dwuma no bi ne microwave baking mats, industrial dryer conveyor belts, reactor linings a wɔde nnuru di dwuma, ne microwave popcorn bag liners. FDA abasobɔde ahorow a ɛwɔ hɔ ma aduan a wɔde di nkitaho.

PTFE ntama a ɛyɛ hyew kɛse (PTFE-coated fiberglass) nni flex resistance a enye efisɛ fiberglass substrate no fi awosu mu yɛ brittle. Ntama a ɛyɛ tratraa (0.08mm) tra ase bere a wɔabobɔw ɔhaha pii kosi mpempem pii; grades a emu yɛ duru (>0.25mm) mpaapaemu wɔ du du pii akyi. Satin nwene yɛ adwuma yiye sen nwene a ɛnyɛ den. Sɛ wopɛ sɛ wokɔ so kotow a, susuw PTFE sini a ɛyɛ den anaa ntama a egyina aramid so ho mmom.

Wɔde PTFE ntama a ɛyɛ hyew kɛse (PTFE-coated fiberglass) di dwuma kɛse wɔ ntama tintim ne kɔla a wɔde yɛ ɔhyew a wɔde fa tintim abɔso (180-230°C), screen tintim pon so kataso, drying mesh abɔso, fusing mfiri abɔso, ne roller wrapping. Ne soro a ɛnyɛ nea ɛbata ho no siw ink/adhesive nkae ano, na ɛtew bere a wɔde siesie fie no so na ɛma ntama no yɛ papa. Seamless endless belts ma wotumi kɔ so yɛ nneɛma.

PTFE ntama a ɛyɛ hyew kɛse (PTFE-coated fiberglass) yɛ premium filter media ma tebea horow a emu yɛ den: flue gas mfutuma a woyi (cement, nwura a wɔhyew, fango boilers kosi 260°C), corrosive nsu filtration (acids, alkalis, ngo), aduan / nnuru sterile filtration, ne HEPA cleanroom filters. Fafa a ɛnyɛ nea ɛbata ho no mma mfutuma ntumi nkɔ mu na ɛma ɛyɛ mmerɛw sɛ wobɛhohoro ho. Membrane-laminated grades nya mframa bɔne a ɛba fam koraa.

PTFE ntama a ɛyɛ hyew kɛse kura anyinam ahoɔden a ɛkyɛn so fi -180°C kosi 260°C: volume resistivity >1013 Ω·cm wɔ 200°C, dielectric daa pintinn wɔ 2.0-2.1. Sɛ ɛboro 260°C a, PTFE yɛ mmerɛw, ɛporɔw boro 327°C, na ɛhwere insulation daa. Wɔ 0°C ase no, insulation no tu mpɔn nanso nea wɔde kata so no bɛyɛ brittle. Tra 260°C mu na ama woatumi ayɛ adwuma a wotumi de ho to so.