Nukae Se Seɖoƒe Na PTFE Avɔ si ƒe Dzoxɔxɔ Deŋgɔ ƒe Subɔsubɔdɔ?

PTFE avɔ si ƒe dzoxɔxɔ lolo la nɔa anyi didina ɖedzesi aɖe – ate ŋu anɔ te ɖe ƒe geɖe ƒe dzoxɔxɔ, atikewo ƒe dɔwɔwɔ, kple non-stick subɔsubɔdɔ nu. Gake mlɔeba la, edoa kpo nu. Biabia lae nye be: nukae nana wòdoa kpo nu, eye aleke nàwɔ ana wòanɔ anyi eteƒe nadidi?

Ŋuɖoɖoa lɔ nu ade ƒe hatsotso ade ɖe eme: dzoxɔxɔ (si lolo wu), mɔ̃wo ƒe nuteɖeamedzi, atikewo ƒe nɔnɔme, dzadzɛnyenye ƒe mɔnuwo, nudzraɖoƒe ƒe nɔnɔme, kple avɔa ŋutɔ ƒe nyonyome gbãtɔ.

Aokai PTFE ku agbledede ƒe kpododonuwo me le dɔwɔwɔ akpe geɖe me. Míeɖe nu ɖesiaɖe me le ete, alesi nàwɔ ade dzesi nuxlɔ̃amedzesiwo kaba, kple nusi nàte ŋu awɔ be nàdidi subɔsubɔ ƒe agbenɔƒe ɖe edzi.

Dzoxɔxɔ – Amewula Gbãtɔ

PTFE ate ŋu akpɔ dzoxɔxɔ sesẽ gbɔ, gake vaseɖe afi aɖe ko. Wu teƒe ma, eye eƒe gbegblẽ nu sẽna kabakaba.

1. Dzoxɔxɔ si gbɔ eme ƒe dɔwɔwɔ atraɖii

PTFE ƒe dzoxɔxɔ si sɔ gbɔ wu si woate ŋu azã atraɖii ɣeyiɣi didi anɔ abe 260°C ene . Tsaɖiɖi kpuiwo yi 300°C sɔ, gake ɣeyiɣi didi ƒe dzoxɔxɔ si wu 260°C nana:

• Nusi wotsɔ blae ƒe ɣie kple eƒe gbagbã

• Nusiwo meléna ɖe nu ŋu o ƒe bu

• Gbegblẽ (si wu 400°C, si naa ya siwo me aɖi le dona) .

• Mɔ̃wo ƒe ŋusẽ dzi ɖeɖe kpɔtɔ

Agble me ŋkuléle ɖe nu ŋu: PTFE ƒe mɔ̃ si wotsɔna tsɔa nu si zɔna le dzoxɔxɔ 280°C teƒe le esi teƒe be wòanɔ 250°C ate ŋu anɔ anyi ɣleti 6 pɛ ko le esi teƒe be wòanɔ anyi ƒe 3.

2. Dzoxɔxɔ kple fafa kabakaba enuenu (dzoxɔxɔ ƒe ʋuʋu) .

PTFE ƒe nutsyɔnu kple fiberglass substrate ƒe dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ ƒe xexlẽdzesi vovovowo le wo si. Ne wodo dzo avɔa eye wòfa kabakaba eye wogawɔe enuenu la:

• Nusi wotsɔ blae la kekena eye wòtsina le agbɔsɔsɔ si to vovo na ahuhɔ̃e kaawo tɔ

• Esia nana be delamination le ƒuƒoƒo dome → gbagbã, ʋuʋudedi, kple mama

• Vevietɔ le avɔ ƒe gowo kple mɔ̃ siwo wotsɔ blaa nu ŋu

Mɔxexe ɖe enu: Ƒo asa na dzoxɔxɔ ƒe tɔtrɔ kpata. Le afisiwo womate ŋu aƒo asa na dzoxɔxɔ ƒe tsatsam le o la, tia avɔ si ƒe nu léna ɖe eŋu nyuie wu (wowɔa nu ɖe ​​ahuhɔ̃ea ƒe anyigba ŋu nyuie) eye nàƒo asa na babla ɖaɖɛwo.

Mɔ̃ɖaŋununya ƒe Nuteɖeamedzi – Bend, Tension, kple Abrasion

Fiberglass si wofa PTFE la sesẽna le eƒe tete me gake megbɔdzɔ le eƒe ƒoƒo enuenu me. Zi geɖe la, mɔ̃wo ƒe nuteɖeamedzie nyea nu evelia si hea kpododonu vɛ wu le dzoxɔxɔ si gbɔ eme megbe.

1. Ebɔbɔ kple eƒoƒo enuenu

Togbɔ be PTFE avɔ te ŋu trɔna bɔbɔe hã la, fiberglass substrate la mete ŋu nɔa te ɖe flex nu nyuie o. Babla ɣesiaɣi alo flitete mavɔ le teƒe ɖeka ana:

• Gblẽ ahuhɔ̃e ƒe kaawo

• Gbugbɔ PTFE ƒe nutsyɔnu la

• Wɔ dzesi ɣi siwo womate ŋu atrɔ o siwo kaka kabakaba zua aɖatsi

Mɔxexe ɖe enu: Zã afisi woate ŋu abɔbɔe wòalolo wu. Le dɔ siwo hiã be woabla wo enuenu (le kpɔɖeŋu me, xɔmetsovɔ siwo woate ŋu aʋuʋu) gome la, bu PTFE avɔ si ƒe kpekpeme le tsɛ wu alo esi ŋu aramid-do ŋusẽe ŋu.

2. Ŋusẽ si gbɔ eme si wotsɔ hea nu

Ne wozãe abe mɔ̃ si wotsɔna tsɔa nu ene la, eƒe tete akpa nana:

• Fiber fatigue (glass fibers gbãna vivivi le agba si nɔa anyi didi ta) .

• Coating deformation (keke kple eƒe ƒuƒu) .

• Vivivi la, eƒe ɖiɖi eye wòva vuvu mlɔeba

Mɔxexe ɖe enu: Wɔ ɖe alesi atikewɔƒea kafui be wòate ŋu awɔe dzi. Le mɔ̃ siwo tsɔa nu didiwo gome la, zã avɔ si ƒe tenɔnɔ sesẽ wu (le kpɔɖeŋu me, avɔ si kpekpe wu alo avɔ si keke wu).

3. Ʋuʋu kple ʋuʋu atraɖii

Ne wotsɔ nu sesẽ alo nu sesẽwo ƒu gbe ɣeyiɣi didi la, PTFE ƒe nutsyɔnu la vuvu. Ne nusi wotsɔ blae vɔ ko la, fiberglass ka siwo woɖe ɖe go la vuvu eye wodoa kpo nu kabakaba.

Mɔxexe ɖe enu: Le glidzaglidzadɔwo (le kpɔɖeŋu me, mɔfiamɔ̃wo) gome la, zã PTFE ƒe dzesi si yɔ fũ kple abrasion tsitretsitsi si nyo wu alo nàtsɔ aŋekotoku akpe ɖe eŋu. Amisisi edziedzi (silicone ami si sɔ na nuɖuɖu) hã ate ŋu aɖe ʋuʋudedi dzi akpɔtɔ.

Atikewo ƒe Nɔnɔme – Menye Atikewo Katãe Le Dedie o

PTFE xɔ ŋkɔ be mewɔa dɔ o, gake atike aɖewo dzea edzi – vevietɔ le dzoxɔxɔ gã me.

1. Oxident sesẽwo kple ga siwo wɔa dɔ

Le dzoxɔxɔ gã me la, kadodo kple nusiwo gbɔna agblẽ PTFE tẽ:

• Alkali ga siwo wofa (sodium, potassium) – tsɔtsrɔ̃ keŋkeŋ

• Chlorine trifluoride, fluorine gas – ŋutasẽnuwɔwɔ ƒe nuwɔna

• Acid sesẽ siwo me nuwo sɔ gbɔ ɖo ŋutɔ – woƒe ʋuʋu vivivi le dzoxɔxɔ si kɔ me

Mɔxexe ɖe enu: Ƒo asa na atike siawo keŋkeŋ. Le dɔwɔwɔ siwo me oxidizers sesẽwo le gome la, zã nu bubu alo kpɔ egbɔ be PTFE avɔa meɖe ɖe go tẽ o.

2. Nusiwo me silicon le kple ami ƒe gege ɖe eme

Ne dzoxɔxɔ si nu sẽ ƒe ami, nusiwo ɖea silicone ɖe go, alo nuɖuɖumi ƒe gege ɖe nusi wotsɔ blae ƒe ʋuʋudedi suesuesuewo me ɣeyiɣi didi ate ŋu ana:

• Carbonization kple coking le nusi wotsɔ blae la te

• Blistering kple delamination ne wodo dzoe

Mɔxexe ɖe enu: Klɔ avɔa ŋu edziedzi hafi ɣeyiɣi susɔeawo nage ɖe eme. Ne ami kpekpe le ame ŋu la, tia nusi le ʋeʋẽm wu (ka ƒe xexlẽme si lolo wu) si le anyigba.

Dzadzɛnyenye Kple Eŋudɔwɔwɔ – Alesi Nàkɔ Nu Ŋu Le Vevie

Dzadzɛnyenye madzemadzee nye nusi bɔ, si woate ŋu axe mɔ na, ​​si nana wòdoa kpo nu kaba.

1. Nusiwo susɔ siwo me carbon le ɖeɖeɖa

Zi geɖe la, wotsɔa ga ƒoa ƒu, gakpo, alo nusiwo wotsɔna klɔa nuɖuɖu, nulénu, nuŋlɔtsi, alo nu bubu siwo wotsɔ ƒo ƒui siwo sesẽ la ɖa. Dɔwɔnu siawo ƒoa PTFE ƒe nutsyɔnu la . Ne wonya ƒoe ko la, nunɔamesi si meléna o la buna, eye ɖiƒoƒo léna bɔbɔe wu – si wɔnɛ be tsatsam vɔ̃ɖi aɖe dzɔna.

Mɔnu nyuitɔ: Zã plastik-klɔnu, atikplɔ, alo nylon-brɔs falɛfalɛwo. Ne èdi nusiwo susɔ sesĩe la, tsɔe de tsi alo nàtsɔe afae hafi nàtutui.

2. Dzadzɛnyenye ƒe atike siwo mesɔ o

PTFE ŋutɔ nye atike si mewɔa dɔ o, gake woate ŋu adze nusi wotsɔ léa nu ɖe ​​nu ŋu (na kasɛtwo) alo nusi wotsɔ blaa nu kple nusi wotsɔ blae dome dome. Tsilele ɣeyiɣi didi le:

• Atike sesẽ siwo wotsɔna tsia amae (nu siwo ɖea amadede ɖa, acetone) .

• Atike siwo me pH sɔ gbɔ ɖo (bleach, caustic cleaners) .

...ate ŋu ato pinholes me eye wòagbɔdzɔ kadodo si le coating kple substrate dome.

Mɔnu si sɔ: Zã adzalẽ fafɛ, tsi dzodzoe, alo atike siwo sɔ na nuɖuɖu. Klɔe nyuie.

Nudzraɖoƒe Kple Nutome ƒe Nɔnɔmewo

Ne womele PTFE avɔ zãm o gɔ̃ hã la, ate ŋu agblẽ ne wodzrae ɖo nyuie o.

1. UV zazã ɣeyiɣi didi

PTFE te ŋu nɔa te ɖe yame ƒe nɔnɔme nu nyuie, gake ne wotsɔe de gota UV sesẽ aɖe ɣeyiɣi didi la, ana:

• Anyigba ƒe tsitsi vivivi

• Chalking (aŋɔ ɣi si le edzi) .

• Tensile ŋusẽ dzi ɖe kpɔtɔ

Mɔxexe ɖe enu: Ne èdi be yeazã gota gome la, tia dzesi siwo me UV-si li ke. Le avɔ si wodzra ɖo gome la, dae ɖe teƒe si do viviti eye wotsyɔ edzi.

2. Tsidzadza kple ʋuʋudedi

Ne nusi wotsɔ blae la gblẽ la, tsi gena ɖe fiberglass ƒe dowo me eye wòɖea ka ƒe ŋusẽ dzi kpɔtɔna. Acid siwo nuɖuɖu ƒe nugbagbevi siwo wotsɔ ƒo ƒu wɔe hã gblẽa nu le kadodoa ƒe domedome.

Mɔxexe ɖe enu: Dzra avɔa ɖo ɖe teƒe si ƒu kplakplakpla. Klɔe hafi nàdzrae ɖo. Mègagblẽ avɔ ƒoɖiwo ɖi woaxatsa ɣleti geɖe o.

3. Nudzraɖoƒe si mesɔ o

• Ne woblae ɣeyiɣi didi le nyaƒoɖeamenu sesẽ me la, enaa ʋuʋudedi nɔa anyi ɖaa (teƒe siwo wodoa kpo nu kabakaba).

• Ne wodzra nu ɖo le dzoxɔxɔtsoƒewo gbɔ (dzoxɔxɔ ƒe pɔmpiwo, dzodoƒewo) nana dzoxɔxɔ ƒe tsitsi kaba.

Nudzraɖoƒe nyuie: Mia avɔa ɖe nu vevi aɖe dzi wòabɔbɔ, dzrae ɖo ɖe tsitrenu ne anya wɔ, le teƒe fafɛ (10-30°C), si ƒu (<60% RH), si do viviti.

Manufacturing Quality – Èkpɔa Nusi Nèxena

Menye PTFE avɔwo katãe wowɔna sɔsɔe o. Vovototo siwo le nyonyome ŋu kpɔa ŋusẽ ɖe subɔsubɔgbenɔnɔ dzi vevie.

1. Nutsyɔtsyɔ ƒe titrime kple ɖekawɔwɔ

Nusi wotsɔ blae ƒe titrime si mesɔ o, pinholes, ya ƒe kuɖɔwo, alo tsidedee kple sintering si gblẽ ana dɔwɔwɔ ƒe agbenɔƒe nadidi ŋutɔ. Adzɔnuwo ƒe nyonyome deŋgɔ ƒe nɔnɔme:

• Glass ka siwo wotsɔ blaa nu bliboe

• Adhesion sesẽ le nusi wotsɔ blae kple nusi wotsɔ blae dome

• Pinholes alo voids aɖeke meli o

• Ðeɖiteameŋu ƒe tsitretsitsi si de ŋgɔ wu

2. Substrate ƒomevi

Alesi wolɔ̃a avɔe, ka ƒe didime, kple eƒe kpekpeme ye afia eƒe mɔ̃ɖaŋununya ƒe dɔwɔwɔ. Avɔ tsɛ alo gã siwo me wotsɔa lãgbalẽ wɔe siwo mesɔ na dɔwɔwɔ ƒe nɔnɔmewo o la vuvuna kabakaba.

Aokai PTFE zãa fiberglass substrates nyuitɔwo kple weave density nyuitɔ kekeake kple PTFE impregnation blibo. Míenaa mɔ̃ɖaŋununya ŋuti nyatakakawo tso tensile strength, coating titrime, kple pinhole xexlẽme ŋu.

Kpuie ko la – Alesi Nàwɔ Adzi PTFE Avɔ Subɔsubɔdɔ ƒe Agbenɔƒe Dzi Ðe Edzi

Aokai PTFE wɔa PTFE avɔ si ƒe dzoxɔxɔ deŋgɔ le dzidzenu kɔkɔwo nu. Míate ŋu akpe ɖe ŋuwò nàtia dzeside, titrime, kple lãgbalẽ nyuitɔ na wò dɔdamɔnua be wòana subɔsubɔ ƒe agbenɔƒe nade edeƒe.

Nyatakaka siwo le etame la tso... Jiangsu Aokai Nu Yeyewo Mɔ̃ɖaŋununya Co., Ltd.

Ne èdi nyatakaka tɔxɛwo, mɔfiame siwo ku ɖe dɔwɔwɔ ŋu, kple egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu na PTFE avɔ siwo ƒe dzoxɔxɔ lolo, kasɛtwo, mesh belts, kple bubuwo:

• Aƒetɔ Guo: +86 18944819998

• Aƒetɔ Liu: +86 13705266308

Míeléa dɔwɔwɔ nyuie kple fɔmaɖimaɖi me ɖe asi, míedzea agbagba be míana egbɔkpɔnuwo le teƒe ɖeka kple dɔ siwo ŋu wobua tame le.