Fabric Fiberglass gbasaara Vs. Fabric Fiberglass Conventional: Isi ihe dị iche na ngwa

Mgbe ị na-ahọrọ akwa fiberglass maka ngwa okpomọkụ dị elu, a na-elegharakarị otu nhọrọ anya: akwa fiberglass gbasaa na akwa akwa fiberglass nkịtị.

Akwa fiberglass gbasasịrị (nke a na-akpọkwa akwa akwa akwa yarn buru ibu) na-ele anya ma na-enwe mmetụta kpamkpam. Ọ dị nro, toro, na isi ike - dị ka mmetụta ma ọ bụ owu - kama ịhịa aka n'ahụ, kenkowaputa, na isi ike. Ọdịiche a na-abịa site na nhazi yarn ma na-emetụta ihe mkpuchi ọkụ, akara, nzacha, na ihe eji arụ ọrụ.

Usoro Aokai PTFE ma gbasaa na nke nkịtị fiberglass akwa na mkpuchi PTFE . Ntuziaka a na-akọwa ihe agbasawanye akwa fiberglass bụ, otú e si emepụta ya, na otú o si atụnyere ákwà a na-emekarị na mpaghara arụmọrụ.

Kedu ihe bụ Fabric Fiberglass gbasaa?

A na-eji akwa eriri enyo agbasa agbasa nke ọma (nke a na-akpọkwa akwa yarn) kpara akpa. A na-emepụta yarn ahụ site na usoro ịka nká:

• Na-aga n'ihu iko fiber filament bundles na-edobe elu-nrụgide ikuku jet na n'ibu deformation.

• Nke a na-ekewapụta filaments n'otu n'otu n'ime ngwugwu.

• A na-afụkọta filament ndị ahụ, gbakọọ ma na-efegharị efegharị, na-emepụta yarn na-agbanwe agbanwe.

Yarn na-esi na ya pụta na-ele anya ma na-akpa àgwà dị ka owu ma ọ bụ ajị anụ - dị nro, buru ibu, na mkpakọ. A na-akpazi ya ka ọ bụrụ ákwà. Mgbasawanye ahụ bụ anụ ahụ, ọ bụghị kemịkalụ - ihe mejupụtara iko na-agbanwe agbanwe.

Isi ihe dị iche na ilele

Ntụnyere ihe onwunwe na nkọwa

H3: Ihe mkpuchi ọkụ - uru kachasị ukwuu

Ọdịdị yarn ahụ na-agba ọsọ, nke na-egbuke egbuke nke akwa fiberglass gbasaara na-ejide nnukwu ikuku na-eguzo - onye na-eduzi okpomọkụ na-adịghị mma. Nke a na-eme ka ọ dị elu maka mkpuchi thermal. A na-eji ya eme ihe n'ọtụtụ ebe maka mkpuchi ọkpọkọ na-ekpo ọkụ, na-emechi ọnụ ụzọ oven, na jaket mkpuchi mkpuchi.

Akwa akwa, yana akwa yarn ya, na-ejide obere ikuku ma na-enye mkpuchi ọkụ kwụ ọtọ nke na-adịghị ike. A na-ejikarị ya eme ihe dị ka ihe na-eguzogide okpomọkụ, na-ejikọta ya na mkpuchi ma ọ bụ batting thermal.

1. Nzacha na ike mgbasa ozi

Akwa gbasasịrị nwere elu yarn na-enweghị isi yana ọtụtụ pores dị n'ime, na-enye ikike ijide uzuzu dị elu yana arụmọrụ nzacha. Nke a na-eme ka ọ dị mma maka mgbasa ozi nzacha ọkụ ọkụ dị elu (akpa nzacha).

Akwa a na-emebu na-adabere naanị na oghere ntupu a kpara akpa maka nzacha, na-ebute arụmọrụ dị ala yana mfe imechi.

2. Mechanical Njirimara - ahia-offs

• Ike tensile: akwa gbasachara dị ntakịrị karịa akwa a na-ahụkarị nke otu ịdị arọ, n'ihi na filaments crimped anaghị ebu esemokwu ahịrị kwụ ọtọ nke ọma.

• Mgbochi akwa na ngbanwe: akwa gbasaa ka mma. Ọdịdị na-agbanwe agbanwe, nke crimped na-eguzogide nkwụsịtụ n'okpuru ọrụ dị ike yana ịgbagọ ugboro ugboro. Akwa akwa, ebe ọ siri ike na mgbakasị ahụ, na-agbaji ma na-enwekarị mgbaji n'okpuru mpịaji ugboro ugboro.

3. Nkwekọrịta na mkpuchi

N'otu ebe ahụ dị arọ, akwa akwa gbasaa na-adịwanye ukwuu ma na-ekpuchi mma. Ọ na-adaba nke ọma n'ihe ndị a na-eme ka oge na-aga, na-enwekwa oghere dị n'etiti yarn bara ụba. Akwa a na-emebu dị gịrịgịrị na kọmpat, yana nkwekọ na-esighị ike - ọ na-etolite oghere ndị nwere oghere mgbe etinyere ya na mbara ala gbagọrọ agbagọ.

Ngwa a na-ahụkarị

1. Ịgbasa akwa fiberglass - mkpuchi, mkpuchi, na nzacha

• Igwe ọkụ na-ekpo ọkụ dị elu

• Uwe mkpuchi ọkpọkọ na jaket okpomọkụ nke mbughari

• Iberibe ọnụ ụzọ oven

• Ihe mkpuchi ịgbado ọkụ na nchekwa ọkụ

• Akpa nzacha okpomọkụ (na-enwekarị mkpuchi PTFE ma ọ bụ vermiculite)

• Mgbasa akpụkpọ anụ nkwonkwo (njikọ duct na-agbanwe agbanwe)

• A na-ekpuchikarị ya na vermiculite ma ọ bụ silicone rọba iji kwalite nguzogide okpomọkụ na ikuku siri ike

2. Ngwongwo fiberglass a na-ahụkarị - nkwado na mkpuchi eletriki

• Ngwa eletrọnịkị maka bọọdụ sekit e biri ebi (PCB)

• Fiberglass kwadoro plastik (FRP) - ihe mejupụtara

• Ihe mkpuchi ọkụ na akwa na-egbochi ire ọkụ

• A na-ewu akwa ntupu (nkwado mgbidi)

• Ihe mkpuchi mkpuchi mkpuchi (maka wires na eriri)

Nchịkọta – Họrọ dabere na mkpa gị

Usoro Aokai PTFE ma gbasaa na akwa fiberglass nke nwere mkpuchi PTFE. N'ihi na PTFE kpuchie akwa gbasaa, mkpuchi enhances kemịkalụ na-eguzogide na-abụghị stick mgbe na-echebe ndị na-akpata mkpuchi na conformability uru. Kpọtụrụ anyị ka anyị kparịta ụdị nke dabara ngwa gị.

Enyere ọdịnaya dị n'elu Ụgwọ nke ụlọ ọrụ Jiangsu Aokai New Materials Technology Co., Ltd.

Ọ bụrụ na ị chọrọ ịmatakwu banyere nkọwa nkọwa, ngwa ndapụta na ngwọta ahaziri maka anyị zuru ngwaahịa nso, gụnyere PTFE elu okpomọkụ akwa, PTFE elu okpomọkụ teepu, PTFE ntupu eriri, enweghị nkebi bonding igwe eriri, otu-akụkụ PTFE ákwà, elu-okpomọkụ na-eguzogide ebuga na elu-glazed belts, na-eguzogide anyị fiberglass.

• Maazị Guo: +86 18944819998

• Maazị Liu: +86 13705266308

Anyị na-akwado nkà ihe ọmụma nke ọkachamara na iguzosi ike n'ezi ihe mgbe niile, ma na-agba mbọ ịnye gị ngwọta nkwụsịtụ na ọrụ ndị na-eche echiche.