Faɗaɗɗen Fiberglass Fabric Vs. Fiberglass Fabric na al'ada: Maɓallin Maɓalli Da Aikace-aikace

Lokacin zabar masana'anta na fiberglass don aikace-aikacen zafin jiki mai zafi, zaɓi ɗaya sau da yawa ana watsi da shi: faɗaɗa fiberglass masana'anta tare da masana'anta mai santsi na al'ada.

Faɗaɗɗen masana'anta na fiberglass (wanda kuma ake kira masana'anta gilashin yarn mai girma) yayi kama da jin daban. Yana da taushi, kauri, kuma mai banƙyama - kamar ji ko auduga - maimakon santsi, mai sheki, da tauri. Wannan bambanci ya fito ne daga tsarin yarn kuma yana rinjayar yanayin zafi, rufewa, tacewa, da kayan aikin injiniya.

Aokai PTFE duka sun faɗaɗa kuma na al'ada Ayyukan fiberglass yadudduka tare da suturar PTFE . Wannan jagorar ya bayyana abin da aka faɗaɗa masana'anta na fiberglass, yadda aka yi shi, da kuma yadda yake kwatanta masana'anta na al'ada a cikin mahimman wuraren aiki.

Menene Faɗin Fiberglass Fabric?

Faɗaɗɗen masana'anta na fiberglass ana saka shi daga zaren filaye na gilashin da aka ƙera musamman (wanda kuma ake kira yarn mai girma). Ana samar da yarn ta hanyar girma:

• Ci gaba da gilashin fiber filament daure suna hõre high-matsi iska jet da inji nakasawa.

• Wannan yana raba filaments guda ɗaya a cikin tarin.

• Filayen suna murƙushe, murƙushewa, da ƙumburi, suna ƙirƙirar yarn mai ƙyalƙyali.

Yadin da aka samu ya yi kama da auduga ko ulu - mai laushi, mai girma, da matsawa. Sa'an nan kuma a saka shi cikin masana'anta. Fadadawa ta jiki ce, ba sinadarai ba - abun da ke cikin gilashin ya kasance ba canzawa.

Maɓalli Maɓalli a Kallo

Kwatancen Dukiya dalla-dalla

H3: Ƙarfafawar thermal - babbar fa'ida

Ƙaƙƙarfan tsarin yarn mai ƙyalƙyali na ƙyallen fiberglass da aka faɗaɗa tarko mai yawa na iska - matalaucin zafin rana. Wannan ya sa ya zama mafi girma ga rufin thermal. Ana amfani dashi ko'ina don nade bututu mai zafi, rufe kofar tanda, da riguna masu cirewa.

Yadudduka na al'ada, tare da tsarin yarn ɗin sa, yana riƙe da ƙarancin iska kuma yana ba da kariya ta zafi mai rauni. Ana amfani da shi da farko azaman maɗaurin zafin jiki, yawanci ana haɗa shi da sutura ko batting na thermal.

1. Tacewa da ƙarfin talla

Faɗaɗɗen masana'anta yana da saman yarn mai ƙyalli da ɗimbin pores na ciki, yana ba da ƙarfin ɗaukar ƙura da ingantaccen tacewa. Wannan ya sa ya zama manufa don babban zafi mai zafi mai tace iskar gas mai zafi (jakunkunan tacewa).

Yadudduka na al'ada sun dogara ne kawai akan buɗaɗɗen raga don tacewa, yana haifar da ƙarancin inganci da sauƙin toshewa.

2. Mechanical Properties - ciniki-offs

• Ƙarfin ɗaure: Faɗaɗɗen masana'anta ya ɗan yi ƙasa kaɗan fiye da masana'anta na nauyi iri ɗaya, saboda ƙuƙuman filaments ba sa ɗaukar tashin hankali daidai gwargwado.

• Yaga da juriya: Faɗaɗɗen masana'anta ya fi kyau. Tsarin sassauƙa, gurɓataccen tsari yana ƙin karyewa ƙarƙashin sabis mai ƙarfi da lankwasawa maimaituwa. Yadudduka na al'ada, yayin da yake da ƙarfi a cikin tashin hankali, yana da rauni kuma yana da saurin karyewa a ƙarƙashin maimaita maimaitawa.

3. Daidaituwa da ɗaukar hoto

A daidai wannan ma'aunin yanki, masana'anta da aka faɗaɗa sun fi girma kuma suna rufe mafi kyau. Yana dacewa da abubuwa masu siffa ba bisa ka'ida ba kuma yana fasalta ɗimbin ɓangarorin yarn mai ƙarfi. Yadudduka na al'ada sirara ce kuma ƙarami, tare da ƙarancin daidaituwa - tana ƙoƙarin samar da giɓi mara ƙarfi lokacin da aka haɗe shi zuwa filaye masu lanƙwasa.

Aikace-aikace na yau da kullun

1. Fadada fiberglass masana'anta - rufi, rufewa, da tacewa

• High-zazzabi thermal gaskets

• Hannun rufin bututu da jaket ɗin zafi masu cirewa

• Tsuntsaye masu rufe kofar tanda

• Welding barguna da walƙiya kariya

• Jakunkuna masu zafin jiki mai zafi (sau da yawa tare da PTFE ko murfin vermiculite)

• Faɗuwar haɗin gwiwa fatun (masu haɗa bututu masu sassauƙa)

• Sau da yawa ana lulluɓe shi da vermiculite ko roba siliki don haɓaka juriya na zafin jiki da ƙarancin iska

2. Gilashin fiberglass na al'ada - ƙarfafawa da kuma wutar lantarki

• Matsakaicin darajar lantarki don allon da'ira da aka buga (PCB)

• Fiberglass ƙarfafa robobi (FRP) - abubuwan haɗin gwiwa

• Labulen wuta da yadudduka masu hana wuta

• Gina raga (ƙarfafa bango)

• Insulation nade substrate (na wayoyi da igiyoyi)

Takaitawa - Zaɓi Bisa fifikonku

Aokai PTFE yana aiwatar da yadudduka na fiberglass na yau da kullun tare da suturar PTFE. Domin PTFE-rufi fadada masana'anta, da shafi kara habaka sinadarai juriya da kuma maras sanda yayin da tsare tushen rufi da conformability amfanin. Tuntube mu don tattauna nau'in nau'in da ya dace da aikace-aikacen ku.

Abubuwan da ke sama sun samar da su Jiangsu Aokai New Materials Technology Co., Ltd.

Idan kuna son ƙarin koyo game da cikakkun bayanai dalla-dalla, yanayin aikace-aikacen da keɓaɓɓen mafita don kewayon samfuran mu, gami da masana'anta masu zafin jiki na PTFE, kaset ɗin zafin jiki na PTFE, bel ɗin raga na PTFE, bel ɗin na'ura mai haɗawa, zane mai gefe guda PTFE, high-zazzabi mai jurewa isar da bel ɗin filastik da ƙwanƙwasa ƙwanƙwasa fiberglasshen mu, ƙwanƙwasa ƙwanƙwasa fiberglas mai ƙarfi

• Mr. Guo: +86 18944819998

• Malam Liu: +86 13705266308

A koyaushe muna ɗaukar falsafar ƙwararru da mutunci, kuma mun himmatu wajen samar muku da mafita ta tsayawa ɗaya da sabis na tunani.