Extreme Conditions & Lasting Performance atan
siamtu rintlak tak PTFE Film Tape

Workflow I Ti chak zawk: Non-Stick Surfacetic Index a ni

Value I Maximize: Bawlhhlawh tlem zawk, Hlawkna sang zawk

In » Thil siam chhuah te » PTFE Adhesive Tape hmanga siam a ni » PTFE Film Tape hmanga siam a ni » PTFE Film Tape hmanga siam a ni

ptfe film adhesive tape hmanga siam a ni

non directional PTFE film tape hmanga siam a ni

PTFE Film Tape hmanga siam a ni

PTFE Film Tape hi ptfe film adhesive tape an ti bawk a, directional leh non-directional type te pawh a tel.

1.Non-stick PTFE coating a ni a;
2.Silicone adhesive him leh rintlak;
3.Wide temperature resistance range -54°C(-65°) atanga 260°C(500°C) thleng a ni a;
4.Humidity hniam;
5.Hman awlsam, service dam rei;
6.A bik takin sealing leh insulation atan;
7.Certificate: ISO 9001:2015, FDA & UL te chuan an ziak a;
8.Service & support tha tak a ni a, chutah chuan pre-sales, in-sales & after-sales te pawh a tel a;
9.Customize pawm;
10.OEM/OBM service a ni.


A awm theih dan:



Zawhna zawt rawh

ptfe film tape a ni ptfe film adhesive tape hmanga siam a ni non directional PTFE film tape hmanga siam a ni PTFE Adhesive Tape hmanga siam a ni PTFE teflon hmanga siam a ni

Product Category hrang hrang a awm

Product Description chungchang

China rama professional kan ni a , PTFE Film Tape siamtu leh supplier lei emaw wholesale emaw turin . ptfe film adhesive tape kan factory atanga Free sample lak duh tan, customized duh tan tunah hian min rawn biak theih reng e .

PTFE Film Tape hi Teflon thianghlim (Teflon) turning film hmanga siam a ni a, base material atan siam a ni a, a sir khatah special treatment hnuah, a sir khatah adhesive a awm. A danglam bikna comprehensive property neiin, engineer leh designer te tan application field-a material solution tha zawk a pe a ni. Tunah hian he tape hi high-performance heat, chemical leh friction resistant tape versatile ber a ni.

Product inhriattirna

PTFE Film Tape hi polytetrafluoroethylene (PTFE) film-based tape a ni a, a chung pakhatah silicone adhesive hmanga enkawl a ni a, hei hian temperature resistance range zau tak a pe a, -54°C(-65°C) atanga 260°C(500°C) thleng a ni. PTFE Film Tape ah hian a tel a ni . PTFE extruded film tape leh PTFE extruded film tape te

PTFE extruded film tape hian non-stick leh abrasion-resistant surface a nei a, hei hian pressure leh temperature inthlak danglamna hmunah character te inkarah quick-release barrier a siam a ni.

PTFE extruded film tape hian friction leh machinery noise tihziaawmna atan a pui a ni. Market-a PTFE skived film tape pangngai nena khaikhin chuan kan PTFE skived film tape hian temperature sang hnuaiah a service rei zawk a, hman zawha a p hian temperature sang hnuaiah a service rei zawk a, hman zawha a peel off hunah residual adhesive a awm lo.

thil langsar tak takte PTFE Film Tape-a

1, lumna do theihna sang tak. Processing temperature 260 degree Celsius-ah a do thei.

2, stains tihbo nan: a chunglam chu a hrual a, eng thil pawhah a innghat awlsam lo. A chung lama oil stain, stain emaw attachment dang inzawm zawng zawng tihfai awlsam; Paste, resin, paint leh adhesive substance zawng zawng deuhthaw chu a paih chhuak mai thei a;

3, chemical laka invenna zau tak: chemical laka invenna hi thil hlu tam tak aiin a tha zawk daih.

4, electrical stability: temperature leh humidity chi hrang hrang dielectric property te hi a stable hle.

5, insulation performance sang tak nei, anti-ultraviolet, anti-static.

6, humidity hniam tak a ni.

7, hman awlsam, service life rei tak a ni.

PTFE film tape hman dan

1. Chaw leh damdawi plastic packaging industry tan heat sealing cutting machine leh high speed heat sealing machine te tan.

2. Dryer chi hrang hrang drying cylinder chunglam anti-stick treatment;

3. Laminator-a drying cylinder chung lamah anti-stick hmanga enkawlna;

4. Guide roller leh press roller chunglam anti-stick hmanga enkawl;

5. Paper machine hmanga cylinder chunglam anti-stick hmanga tihfai;

6. Workpiece chi dang chunglam anti-adhesive, anti-stick rawng, friction hmanna tihtlem.

ptfe film tape a ni ptfe film adhesive tape hmanga siam a ni PTFE Adhesive Tape hmanga siam a ni

-a Technical Parameter hrang hrangte PTFE Fi lm Tape

Inzawmzat	Part Number a ni	Rawng	zawng zawng A thuk (mm) .	Standard zau zawng (mm) 100 a ni.	Base puan Gram rit zawng (g/ 2) .	Tensile chakna (N/25mm) a ni.	Adhesion 180 ° a hnah (N/25mm) a ni.	A chhe lai Voltage (Kv) 1.1.	Antistatic Index a ni
M	M006H a ni	Paw	0.06	300	120	60	5	8	-
	M006BK a ni	Dum	0.06	300	120	60	5	-	10^7-10^5 vel a ni
	M008H a ni	Paw	0.08	300	150	90	6	10	-
	M008BK a ni	Dum	0.08	300	150	90	6	-	10^7-10^5 vel a ni
	M013H a ni	Paw	0.13	420	260	160	8	15	-
	M013BK a ni	Dum	0.13	420	260	160	8	-	10^7-10^5 vel a ni
	M013W a ni	Var	0.13	600	260	160	8	15	-
	M018H a ni	Paw	0.18	600	350	250	9	18	-
	M018BK a ni	Dum	0.18	600	350	250	9	18	10^7-10^5 vel a ni

Thawhhona & Custom

PTFE Film Tape siamtu a ni

Aokai PTFE hian PTFE coated fiberglass fabric quality sang tak leh service level tha tak tak pek hi a ngaih pawimawh ber a ni. Kan professional PTFE coated fiberglass fabric siamtu kan ni a, a hnuaia thil hrang hrangah hian kan pui ang che: basic materials, finished product quality, delivery, leh after-sales service. Aokai hian wholesale, customization, design, packaging, industry solution, leh OEM OBM service dangte a pe che a ni. Kan professional R&D team, production team, quality inspection team, technical service team, leh pre-sales & after-sales service team te hian one-stop service an pe ang che, i hun a humhim ang a, professional product quality tha ber i hmu ang.

Khawiah nge PTFE Fi lm Tape hi lei theih ang?

PFTE Adhesive Tape hmanga siam REACH Report a ni

PTFE Adhesive Tape hmanga siam ROHS Report a ni

chungchanga zawhna i neih chuan PTFE F ilm Tape , ptfe film adhesive tape min rawn biak hreh suh ang che mandy@akptfe.com . Product features, specifications, solutions leh customization options chungchangah information kimchang leh technical support kan pe ang... Kan factory tlawh turin kan lo lawm a che!

Zawhna nei emaw order siam duh tan emaw min rawn biak theih reng e.

Q Custom width emaw length emaw order theih em?

A Ni e. I process nena inmil turin custom width, thickness, leh roll length kan pe bawk. I specification leh quantity mamawh te nen kan sales team te biak theih reng kan ni.
Q Engtin nge tape hi ka dahkhawm ang a, ka enkawl ang?

A Ni êng direct leh lumna hmun hla takah hmun lum leh vawt takah dah rawh. Hun rei tak chhung tuiah awm loh tur. Roll hi hman loh hunah a original packaging-ah dah tur a ni.
Q Lead time pangngai chu eng nge ni?

; Order confirm a nih hnu ni 7 chhungin Standard products a thawn chhuak thin custom options hian hun rei zawk a daih thei. Order angin firm lead time kan confirm ang che.
Q Adhesive hi silicone atanga siam, acrylic, silicone-acetate a ni em?

A Adhesive hi silicone-based a ni a, mahse, customer chuan acrylic-based tape chu a duh angin a siam thei a, chu chuan adhesion sang zawk a pe a ni.
Q PTFE silicone adhesive tape leh PTFE acrylic tape te hi eng nge an danglamna?

ANI
Temperature lama hnathawh dan

● Silicone hmanga siam a ni:

High-temperature stability tha tak leh temperature hniam takah pawh a flexible reng; thermal cycling leh gasket/seal atan a tha hle.

● Acrylic hmanga siam a ni:

Overall temperature performance tha tak mahse a tlangpuiin silicone angin a flexible lo; temperature hniam takah chuan a brittle deuh thei a, temperature sang takah pawh a nem thei bawk.

Chemical laka invenna leh boruak

● Silicone hmanga siam a ni:

Tui lum, tuiah inhnim pil, UV exposure (pawn lama hman tur), leh chemical tam tak laka invenna tha tak; elasticity a vawng reng thin.

● Acrylic hmanga siam a ni:

Environment tam takah chemical leh UV resistance tha tak mahse a tlangpuiin silicone aiin a flexible lo zawk; weathering resistance hi formulation-ah a innghat a ni.

Flexibility vs rigidity a ni

● PTFE-a silicone adhesive awm chu:

Flexible zawk, movement, vibration, leh thermal expansion te seal hloh lovin a awm thei.

● PTFE-ah hian acrylic adhesive a awm a:

A tlangpuiin a khauh zawk; initial hold chak tak mahse movement-ah chuan ngaihdamna nei tlem zawk; rigid, high-tack bonds tan chuan a tha zawk.

A kaihhnawih thil siam

PTFE Tape sen a ni

PTFE Tape dum a ni

Thuziak inzawm te

[PTFE Adhesive Tape hmanga siam a ni ] . Engtin nge organic silicone adhesive hian target curing degree a thlen theih nan coating machine line speed leh oven sei zawng nen high-temperature PTFE tape atan a inmil theih ang?

He thuziak hian high-temperature PTFE tape atana organosilicone adhesive hian target curing degree a thlen theih nan coating machine line speed leh oven sei zawng inmil dan tur a huam a ni. Core matching principle: total residence time t_total = effective oven length L ÷ line speed v chu cure time mamawh tlem ber aia tlem lo a ni tur a ni. DSC emaw adhesive cure test hmangin 'temperature — minimum cure time' inzawmna siamin cure characteristics hmu rawh. Equivalent cumulative cure model: oven chu zone hrang hrangah then la, ti=Li/v leh tcure(Ti) chhut la, ∑(ti/tcure(Ti)) ≥1 tih enfiah rawh. Chhiar dan: temperature zone sei zawng Li leh temperature Ti hmanga siam; set line speed v, zone tinte awmna hun leh contribution ratio chhut; total ≥1 thlengin iterate (safety margin 1.1-1.2 a tha).
[PTFE Adhesive Tape hmanga siam a ni ] . Infrared Radiation Heating leh Hot Air Circulation Heating Curing Methods te hian Organothil siam

He article hian silicone adhesive layer-a crosslinked structure uniformity chungchanga infrared radiation heating leh hot-air circulation heating curing method hrang hrangte a khaikhin a ni. Heat transfer mechanisms: hot-air hian convection-conduction-ah a innghat a, temperature sang zawi zawia sang, chhung lam/pawn lam temperature danglamna tlemte; IR hian penetration depth a nei tlem hle a, surface absorption chak tak (micrometer sawm atanga za tam tak) a nei a, hei hian surface-to-interior gradient steep a siam a ni. Crosslink uniformity-a nghawng a neih dan: hot-air hian a chhung leh pawnah synchronous curing a siam thei a, crosslink density inang tlang a nei a; IR hian surface layer chu rang takin dense 'skin film' a siam a, chu chuan heat conduction leh internal chain motion a tikhawlo a, crosslink density chu surface atanga interior thlengin a tlahniam a ni.
$Silicone pressure-sensitive adhesives-a gel fraction index leh adhesive layer-a cohesive strength inkara quantitative correspondence chu engzat nge ni?$

[PTFE Adhesive Tape hmanga siam a ni ] . Silicone pressure-sensitive adhesives-a gel fraction index leh adhesive layer-a cohesive strength inkara quantitative correspondence chu engzat nge ni?

He article hian Teflon tape atana silicone pressure-sensitive adhesives-a gel fraction leh cohesive strength inkara quantitative correspondence a huam a ni. Gel fraction = toluene-a inthiar theih loh crosslinked network mass percentage (Soxhlet extraction, 24hr). Cohesive chakna chu temperature sang taka holding power (180°C, 1kg) hmanga hriat theih a ni. Range pathum: critical point hnuai lam (<60%) — percolating network awm lo, zero hnaih lama power vawn tlat; practical range (60-85%) — cohesive strength chu gel fraction nen exponential-in a pung a, 60%→70% chuan holding time chu minute atanga darkar thlengin a tisang a, 70%→80% chuan 3-10x increase a pe a crosslinking s, 1kg) hmanga hriat theih a ni. Range pathum: critical point hnuai lam (<60%) — percolating network awm lo, zero hnaih lama power vawn tlat; practical range (60-85%) — cohesive strength chu gel fraction nen exponential-in a pung a, 60%→70% chuan holding time chu minute atanga darkar thlengin a tisang a, 70%→80% chuan 3-10x increase a pe a crosslinking sang (>85%) — gains slow (85%→95% chauh 20-50% a pung), tack tlahniam nasa tak, >95% non-stick property danglam tak avangin a hmingthang hle. He coating hian tape performance a tichak mai bakah eng application-ah pawh awlsam taka release a tichiang bawk.
[PTFE Adhesive Tape hmanga siam a ni ] . Engtin nge peroxide crosslinking agents te decomposition temperature leh half-life te hi Teflon tape atana curing process window nen a inmil tur?

He thuziak hian Teflon tape atana curing process window nena peroxide crosslinking agents (BPO leh DCP) decomposition temperature leh half-life inmil dan tur a tarlang a ni. Core data: BPO — ~131°C-ah 1-min half-life, ~92°C-ah 1-hr, ~72°C-ah 10-hr; DCP — ~171°C-ah 1-min, ~135°C-ah 1-hr, ~115°C-ah 10-hr. Matching logic: adhesive hian 97-99% crosslinking = 5-7 half-lives a mamawh a; curing time = target temperature-ah 5-7 × half-life a ni. Production line residence time atanga temperature back-calculate emaw, maximum allowable temperature atanga back-calculate emaw.
[PTFE Adhesive Tape hmanga siam a ni ] . Infrared radiation heating leh hot-air circulation heating te hian silicone adhesive layer crosslinked structure uniformity a nghawng dan hi eng nge a danglamna?

He article hian silicone adhesive layer crosslinked structure uniformity-a infrared radiation heating leh hot-air circulation heating inkara danglamna a khaikhin a ni. Heat transfer mechanisms: hot-air hi convection-conduction a ni a, a nem a, a kal zel a, temperature gradient hniam tak a siam a; IR hi radiation-absorption a ni a, surface absorption nasa tak (micrometer atanga millimeters) a awm a, chu chuan surface-to-interior gradient steep tak a siam a ni. Crosslink density distribution-a nghawng: hot-air hian chhung lam leh pawn lam chu vulcanization temperature range-ah a rualin a lut thei a, thickness-ah crosslink density inang tlang a pe chhuak a IR hian surface layer chu a tidam nghal a, vun dense tak a siam a, chu chuan heat transfer a tikhawlo a, chu chuan surface atanga crosslink density sharp gradient a tlahniam a ni.