Sɛ wopɛ Tebea a Ɛyɛ Den & Adwumayɛ a Ɛtra Hɔ Daa
Wo Manufacturer a Wotumi De Ho To So ma PTFE Film Tape

Woyɛ Adwumayɛ Ntɛmntɛm: Non-Stick Surface, Adwumayɛ a Ɛyɛ Ntɛmntɛm

Woma Botae Kɛse: Nneɛma a Wɔsɛe no Kakra, Mfaso a Ɛkɔ Anim

ASƐM AKWANKYERƐ

Fie » Nneɛma a wɔyɛ » PTFE Adhesive Tape a wɔde yɛ nneɛma » PTFE Sini Teyp » PTFE Sini Teyp

PTFE Sini Teyp

Wɔsan frɛ PTFE Film Tape ptfe film adhesive tape, a akwankyerɛ ne nea ɛnyɛ akwankyerɛ ahorow ka ho.

1.Non-stick PTFE a wɔde kata so;
2.Secure na ahotoso silicone adhesive;
3.Wide ɔhyew a wɔko tia fi -54 ° C (-65 °) kosi 260 ° C (500 °);
4.Low nsuo a ɛyɛ nwini;
5.Easy sɛ wode bedi dwuma, ɔsom nkwa tenten;
6.Specially ma sealing ne insulation atirimpɔw ahorow;
7.Adansedi nkrataa: ISO 9001:2015, FDA & UL;
8.Excellent ɔsom & mmoa a nea ɛka ho ne pre-tɔn, wɔ-tɔn & akyi-tɔn;
9.Gye tom sɛ wopɛ sɛ woyɛ;
10.OEM / OBM som adwuma.


Nea ɛwɔ hɔ:



Bisa nsɛm

ptfe sini teapɔn ptfe film a wɔde nkata ade so PTFE sini teyp a ɛnyɛ akwankyerɛ PTFE Adhesive Tape a wɔde yɛ nneɛma PTFE teflon a wɔde kyekyere nneɛma ho

Nneɛma a Wɔde Yɛ Adwuma

Aguade Ho Nkyerɛkyerɛmu

Yɛyɛ adwumayɛfo PTFE Film Tape manufacturers ne suppliers wɔ China, sɛ yɛbɛtɔ anaasɛ wholesale ptfe film adhesive tape fi yɛn adwumayɛbea. Sɛ wopɛ nhwɛsode a wontua hwee a, . di yɛn ho nkɔmmɔ mprempren na woanya customized.

PTFE Film Tape yɛ Teflon kronkron (Teflon) dannan film sɛ nnyinaso ade, akyi aduru titiriw wɔ ɔfã biako, ɔfã biako adhesive. Ɛnam sɛ ɛwɔ agyapadeɛ soronko a ɛyɛ pɛpɛɛpɛ nti, ɛma nneɛma ano aduru a ɛkorɔn ma mfiridwumayɛfoɔ ne adwumfoɔ wɔ dwumadie mu. Saa teyp yi mprempren ne teyp a ɛyɛ adwuma yiye a ɛyɛ adwuma yiye sen biara a ɛko tia ɔhyew, nnu

Product nnianim asɛm

PTFE Film Tape yɛ polytetrafluoroethylene (PTFE) film-gyina tape, ɔfasu biako a wɔde silicone adhesive ayɛ ho adwuma, a ɛma ɔhyew a ɛtrɛw a ɛko tia fi -54°C(-65°C) kosi 260°C(500°C). PTFE Film Tape no bi ne PTFE sini teapɔn a wɔayi afi mu ne PTFE sini teapɔn a wɔayi afi mu.

PTFE extruded film tape wɔ non-stick na abrasion-resistant surface, na ɛma ɛyɛ ntɛm-gyae akwanside wɔ nkyerɛwde ahorow ntam baabi a nhyɛso ne ɔhyew sesa.

PTFE extruded film tape boa ma friction ne mfiri dede so tew. Sɛ yɛd

Nneɛma a ɛwɔ PTFE Film Tape mu

1, ɔhyew a ɛkorɔn a ɛko tia. Ɛko tia ɔhyew a ɛyɛ digrii Celsius 260 a wɔde di dwuma.

2, sɛnea ɛbɛyɛ a wobeyi nkekae afi hɔ: ne soro yɛ torotoro, ɛnyɛ mmerɛw sɛ ɛbɛbata ade biara ho. Ɛnyɛ den sɛ wobɛhohoro ngo a ɛyɛ nkekae, nkekae anaa nneɛma afoforo a ɛbata ne soro ho nyinaa; Ɛkame ayɛ sɛ wobetumi ayi paste, resin, paint ne nneɛma a wɔde bata ho nyinaa afi hɔ ara kwa;

3, nnuru a ɛko tia kɛse: nnuru a ɛko tia no ye sen dade a ɛsom bo pii mpo.

4, anyinam ahoɔden a ɛgyina pintinn: ɔhyew ne nsuo ahodoɔ nyinaa dielectric su yɛ stable paa.

5, a ɛwɔ insulation adwumayɛ a ɛkorɔn, anti-ultraviolet, anti-static.

6, nsu a ɛyɛ nwini a ɛba fam.

7, ɛnyɛ den sɛ wode bedi dwuma, ɔsom nkwa tenten.

PTFE sini teyp a wɔde di dwuma

1. Na aduan ne nnuru plastic packaging nnwuma ɔhyew nsɔano twa afiri ne ahoɔhare kɛse ɔhyew nsɔano afiri.

2. Dryer drying cylinder soro anti-stick ayaresa ahorow nyinaa;

3. Anti-stick aya

4. Anti-stick ayaresa a akwankyerɛ roller ne press roller ani;

5. Krataa afiri drying cylinder soro anti-stick ayaresa;

6. Afoforo ahorow adwumayɛbea ani anti-adhesive, anti-stick kɔla, tew application of friction.

ptfe sini teapɔn ptfe film a wɔde nkata ade so PTFE Adhesive Tape a wɔde yɛ nneɛma

Mfiridwuma mu Nneɛma a Wɔde Yɛ PTFE Fi lm Tape

Ntoatoasoɔ	Ɔfã a Ɛto so	Ahosuo	Ne nyinaa mu duru (mm) .	a wɔahyɛ da ayɛ Ntrɛwmu (mm) .	Ntama a wɔde gyina so Gram mu duru (g/ ㎡) .	Tensile Ahoɔden (N/25mm) .	Adhesion 180 ° a wɔde yiyi (N/25mm) .	Asɛe Nneɛma a Ɛma (Kv) .	Antistatic Index a Wɔde Di Dwuma
M.	M006H na ɔkyerɛwee	Nso	0.06	300	120	60	5	8	-
	M006BK na ɔkyerɛwee	Tuntum	0.06	300	120	60	5	-	10^7-10^5 na ɛwɔ hɔ
	M008H na ɔkyerɛwee	Nso	0.08	300	150	90	6	10	-
	M008BK na ɔkyerɛwee	Tuntum	0.08	300	150	90	6	-	10^7-10^5 na ɛwɔ hɔ
	M013H na ɔkyerɛwee	Nso	0.13	420	260	160	8	15	-
	M013BK na ɔkyerɛwee	Tuntum	0.13	420	260	160	8	-	10^7-10^5 na ɛwɔ hɔ
	M013W na ɔkyerɛwee	Fitaa	0.13	600	260	160	8	15	-
	M018H na ɔkyerɛwee	Nso	0.18	600	350	250	9	18	-
	M018BK na ɔkyerɛwee	Tuntum	0.18	600	350	250	9	18	10^7-10^5 na ɛwɔ hɔ

Nkɔmmɔbɔ & Amanne

PTFE Film Tape Yɛfoɔ

Aokai PTFE de n’adwene si so sɛ wɔde PTFE a wɔde fiberglass ntama adura ho a ɛyɛ papa ne ɔsom mu gyinapɛn a ɛkyɛn so bɛma. Yɛyɛ adwumayɛfo PTFE coated fiberglass ntama manufacturers a ɛbɛboa wo wɔ mmeae a edidi so yi: mfitiase nneɛma, awie nneɛma a ɛyɛ papa, delivery, ne akyi-tɔn som. Aokai ma wo wholesale, customization, design, packaging, nnwuma ano aduru, ne OEM OBM nnwuma afoforo. Yɛn adwumayɛfoɔ R&D kuw, adwumayɛkuo, quality inspection team, technical service team, ne pre-sales & after-sales service team bɛma wo adwuma a ɛkɔ baabiara, akora wo bere so na woahwɛ ahu sɛ adwumayɛfoɔ nneɛma a ɛyɛ papa sen biara.

Ɛhe na wobɛtɔ PTFE Fi lm Tape?

PFTE Adhesive Tape REACH Amanneɛbɔ

PTFE Adhesive Tape ROHS Amanneɛbɔ

Sɛ wowɔ nsɛmmisa bi fa PTFE F ilm Tape , ptfe film adhesive tape ho a, yɛsrɛ wo ntwentwɛn wo nan ase sɛ wobɛka yɛn ho wɔ mandy@akptfe.com so. Yɛde nsɛm a ɛkɔ akyiri ne mfiridwuma ho mmoa bɛma wɔ nneɛma a ɛwɔ nneɛma mu, nsɛm a wɔakyerɛkyerɛ mu, ano aduru ne akwan a wɔfa so yɛ nneɛma a wɔpɛ... Yɛma wo akwaaba sɛ kɔ yɛn adwumayɛbea hɔ!

Sɛ wopɛ nsɛmmisa anaasɛ wopɛ sɛ wokra a, yɛsrɛ wo di yɛn ho nkɔmmɔ.

Q So metumi akra custom widths anaa lengths?

A Yiw. Yɛde custom trɛw, thicknesses, ne roll tenten ma sɛnea ɛfata wo nhyehyɛe. Di yɛn adetɔn kuw no ho nkɔmmɔ na fa wo nkyerɛkyerɛmu ne dodow a wɔhwehwɛ.
Q Ɔkwan bɛn so na ɛsɛ sɛ mede teyp no sie na medi ho dwuma?

A Fa sie baabi a ɛhɔ yɛ nwini na ɛhɔ yɛ kusuu a owia hann ne ɔhyew a efi mu ba tẽẽ. Kwati sɛ wode wo ho bɛhyɛ nsu mu bere tenten. Fa nhoma mmobɔwee no sie nea wɔde ahyɛ mu mfiase no mu bere a womfa nni dwuma no.
Q Dɛn ne bere a wɔtaa de di dwuma?

A Standard nneɛma de mena wɔ adwuma nnafua 7 akyi wɔ ahyɛde a wɔahyɛ no den akyi; amanne kwan so nneɛma a wɔpaw no betumi agye bere tenten. Yɛbɛsi so dua sɛ firm lead time ne wo bɛhyɛ.
Q So ade a wɔde nkata ade so no yɛ silicone, acrylic, silicone-acetate?

A Adhesive no yɛ silicone-based, nanso, adetɔfo betumi customize acrylic-based tape, a ɛma adhesion a ɛkorɔn.
Q Nsonsonoe bɛn na ɛwɔ PTFE silicone adhesive tape ne PTFE acrylic tape ntam?

BI
Ɔhyew a wɔde yɛ adwuma

● Silicone a wɔde kyekyere nneɛma ho:

Ɔhyew a ɛkorɔn a egyina pintinn yiye na ɛkɔ so yɛ nea ɛyɛ mmerɛw wɔ ɔhyew a ɛba fam mu; a ɛfata ma thermal cycling ne gaskets/seals.

● Acrylic aduru a wɔde kyekyere nne�lma ho:

Ɔhyew a ɛyɛ adwuma yiye wɔ ne nyinaa mu nanso mpɛn pii no ɛnyɛ nea ɛyɛ mmerɛw te sɛ silicon; betumi ayɛ mmerɛw kɛse wɔ ɔhyew a ɛba fam koraa mu anaasɛ ɛbɛyɛ mmerɛw wɔ ɔhyew a ɛkɔ soro mu.

Nnuru a ɛko tia ne nneɛma a atwa yɛn ho ahyia

● Silicone a wɔde kyekyere nneɛma ho:

Nsu a ɛko tia yiye, nsu a wɔde hyɛ mu, UV a wɔde hyɛ mu (a wɔde di dwuma wɔ abɔnten), ne nnuru pii; kɔ so yɛ nea ɛyɛ den.

● Acrylic aduru a wɔde kyekyere nneɛma ho:

Nnuru ne UV a ɛko tia yiye ma nneɛma a atwa yɛn ho ahyia pii nanso mpɛn pii no ɛnyɛ nea ɛyɛ mmerɛw sɛ silicone; wim tebea a ɛko tia no gyina nnuru a wɔyɛ so.

Nneɛma a ɛyɛ mmerɛw vs rigidity

● Silicone a wɔde nkata PTFE so:

Ɛyɛ nea ɛyɛ mmerɛw kɛse, etumi gye kankyee, wosow, ne ɔhyew a ɛtrɛw a ɛnhwere nsne Krataa a Wɔde Di Dwuma

● Acrylic a wɔde nkata PTFE so:

Mpɛn pii no, ɛyɛ den; mfiase no kura mu denneennen nanso ɛnyɛ bɔne fafiri kɛse wɔ kankyee mu; eye ma nhama a ɛyɛ den na ɛyɛ tack a ɛkorɔn.

Nneɛma a Ɛfa Ho

PTFE Teyp kɔkɔɔ

PTFE Teyp a ɛyɛ fitaa

Nsɛm a ɛfa ho

[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Ɔkwan bɛn so na wobɛhwɛ ahu sɛ organic silicone adhesive no du botae curing degree no ho denam line ahoɔhare a coating afiri no ne fononoo tenten a ɛne no hyia ma high-temperature PTFE tape?

Saa asɛm yi ka sɛnea wɔde coating machine line ahoɔhare ne oven tenten hyia de hwɛ hu sɛ organosilicone adhesive du botae curing degree ma high-temperature PTFE tape. Core matching nnyinasosɛm: bere a wɔde tra hɔ nyinaa t_total = fononoo tenten a etu mpɔn L ÷ line ahoɔhare v ɛnsɛ sɛ ɛba fam sen bere a wɔhwehwɛ sɛ wɔde sa yare a ɛba fam koraa. Nya ayaresa su denam DSC anaa aduring dɔree ma high-temperature PTFE tape. Core matching nnyinasosɛm: bere a wɔde tra hɔ nyinaa t_total = fononoo tenten a etu mpɔn L ÷ line ahoɔhare v ɛnsɛ sɛ ɛba fam sen bere a wɔhwehwɛ sɛ wɔde sa yare a ɛba fam koraa. Nya ayaresa su denam DSC anaa adhesive ayaresa sɔhw��ahorow a ɛde 'ɔhyew — ayaresa bere a ɛba fam' abusuabɔ si hɔ. Equivalent cumulative cure model: kyekyɛ fononoo mu yɛ no zones, bu ti=Li/v ne tcure(Ti), hwɛ hu sɛ ∑(ti/tcure(Ti)) ≥1. Nkontaabu nhyehyɛe: hyehyɛ ɔhyew mmeae a ne tenten y soronne adi, na ɛyɛ adwuma yiye wɔ awɔw ne ɔhyew a ano yɛ den nyinaa mu. Saa nneɛma a wotumi de yɛ nneɛma pii yi ma wɔfata ew a ɛyɛ soronko adi, na ɛyɛ adwuma yiye wɔ awɔw ne ɔhyew a ano yɛ den nyinaa mu. Saa nneɛma a wotumi de yɛ nneɛma pii yi ma wɔfata ma nneɛma ahorow a wɔde yɛ aduan, efi frigye ne nwini a wɔde gu mu so kosi paanoo ne gyabiriw a wɔtow so. Tumi a wotumi gyina ɔhyew mu nsakrae ano a ɛnkyinkyim anaasɛ ɛnsɛe no hwɛ hu sɛ ɛyɛ adwuma daa wɔ aduan a wɔyɛ no fã ahorow mu. Sɛ́ eb
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Nsonsonoe a ɛwɔ Nkɛntɛnso a Infrared Radiation Heating ne Hot Air Cirulation Heating Curing Akwan Nya wɔ Uniformity a Cross-Linked Structure of Organosilicon Adhesive Layers

Saa asɛm yi de nsonsonoe a ɛda infrared radiation heating ne hot-air circulation heating curing akwan horow ntam toto crosslinked structure uniformity of silicone adhesive layers ho. Ɔhyew a wɔde kɔ baabi foforo: mframa a ɛyɛ hyew de ne ho to convection-conduction a ɔhyew a ɛkɔ soro brɛoo, ɔhyew mu nsonsonoe ketewaa bi a ɛwɔ mu/akyi so; IR wɔ bun a ɛkɔ mu a anohyeto wom a ɛwɔ soro a ɛtwetwe denneennen (micrometer du kosi ɔhaha pii) a ɛma ɛyɛ sorokɔ-kɔ-mfinimfini a ɛyɛ toro. Nkɛntɛnso a ɛwɔ crosslink biakoyɛ so: mframa a ɛyɛ hyew ma wotumi yɛ synchronous curing wɔ mu ne akyi a crosslink density yɛ pɛ; IR ma soro layer yɛ ntɛmntɛm dense 'skin film' a esiw ɔhyew a ɛkɔ ne emu nkɔnsɔnkɔnsɔn kankan, ma crosslink density so tew fi soro kɔ mu.
$Dɛn ne dodow a ɛne gel fraction index a ɛwɔ silicone pressure-sensitive adhesives ne cohesive ahoɔden a adhesive layer no ntam?$

[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Dɛn ne dodow a ɛne gel fraction index a ɛwɔ silicone pressure-sensitive adhesives ne cohesive ahoɔden a adhesive layer no ntam?

Saa asɛm yi ka dodow a ɛne ne ho hyia wɔ gel fã ne ahoɔden a ɛka bom wɔ silicone nhyɛso-te nka adhesives ma Teflon tape ntam. Gel fã = mass ɔha biara mu nkyem a ɛyɛ crosslinked network a entumi nnye toluene mu (Soxhlet extraction, 24hr). Ahoɔden a ɛka bom a ɛda nsow ne ɔhyew a ɛkorɔn a ɛkura tumi (180°C, 1kg). Ranges abiɛsa: ase critical point (<60%) — percolating network biara nni hɔ, kura tumi a ɛbɛn zero; practical range (60-85%) — cohesive ahoɔden nyin exponentially ne gel fraction, 60%→70% ma bere a wɔde kura mu fi simma kosi nnɔnhwerew, 70%→80% ma 3-10x nkɔanim; crosslinking a ɛkorɔn (>85%) — mfasoɔ brɛoo (85%→95% 20-50% pɛ kɔ soro), tack kɔ fam kɛseɛ, >95% hwere PSA agyapadeɛ.
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Ɔkwan bɛn so na ɛsɛ sɛ wɔde peroxide crosslinking agents no hyew a ɛporɔw ne ne nkwa nna fã ne curing process indow a wɔde yɛ Teflon tape no hyia?

Saa asɛm yi ka sɛnea wɔde peroxide crosslinking agents (BPO ne DCP) a ɛporɔw hyew ne ne fã nkwa nna bɛyɛ pɛ ne curing process window a wɔde yɛ Teflon tape no ho. Core data: BPO — 1-simma fã nkwa wɔ ~ 131 ° C, 1-hr wɔ ~ 92 ° C, 10-hr wɔ ~ 72 ° C; DCP — 1-min wɔ ~ 171 ° C, 1-hr wɔ ~ 135 ° C, 10-hr wɔ ~ 115 ° C. Nteaseɛ a ɛne ne ho hyia: adhesive hia 97-99% crosslinking = 5-7 fã-nkwa; bere a wɔde sa yare = 5-7 × nkwa fã wɔ ɔhyew a wɔde asi wɔn ani so no mu. Back-bu ɔhyew fi production line residence bere anaasɛ back-bu bere fi maximum a wɔma ho kwan.
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Nsonsonoe bɛn na ɛwɔ nkɛntɛnso a infrared radiation heating ne hot-air circulation heating nya wɔ crosslinked structure a ɛwɔ silicone adhesive layer no mu no mu?

Saa asɛm yi de nsonsonoe a ɛda infrared radiation heating ne hot-air circulation heating ntam toto crosslinked structure uniformity of silicone adhesive layer ho. Ɔhyew a wɔde kɔ baabi foforo: mframa a ɛyɛ hyew yɛ convection-conduction, ɛyɛ brɛoo na ɛkɔ so, na ɛma ɔhyew a ɛkɔ soro a ɛkɔ fam; IR yɛ radiation-absorption a ɛwɔ soro absorption a emu yɛ den (micrometers kosi millimeters) a ɛma ɛyɛ mmepɔwmmepɔw soro-kɔ-mfinimfini gradient. Nkɛntɛnso a ɛwɔ crosslink density kyekyɛ so: mframa a ɛyɛ hyew ma emu ne akyi afã horow no kwan ma ɛkame ayɛ sɛ hyɛn vulcanization temperature range mu bere koro mu, na ɛma crosslink density a ɛyɛ pɛ wɔ thickness no mu; IR ma soro layer sa ntɛm ara a ɛyɛ honam ani a ɛyɛ den a esiw ɔhyew a ɛkɔ baabi foforo kwan, na ɛde sharp gradient of crosslink density so tew fi soro kɔ mu ba.