Sɛ wopɛ Tebea a Ɛyɛ Den & Adwumayɛ a Ɛtra Hɔ Daa
Wo Manufacturer a Wotumi De Ho To So ma PTFE Film Tape

Woyɛ Adwumayɛ Ntɛmntɛm: Non-Stick Surface, Adwumayɛ a Ɛyɛ Ntɛmntɛm

Woma Botae Kɛse: Nneɛma a Wɔsɛe no Kakra, Mfaso a Ɛkɔ Anim

ASƐM AKWANKYERƐ

Fie » Nneɛma a wɔyɛ » PTFE Adhesive Tape a wɔde yɛ nneɛma » PTFE Sini Teyp » PTFE Teapɔn kɔkɔɔ

PTFE Teyp kɔkɔɔ

Wɔsan frɛ PTFE Tape kɔkɔɔ PTFE Adhesive Tape.

1.Saa soro wɔ papa non adhesion ne sliding agyapade;
2.Good anyinam ahoɔden insulation;
3.Can de di dwuma wɔ ɔhyew ahorow pii mu;
4.Good abubu voltage resistance;
5.Adansedi nkrataa: ISO 9001:2015, FDA;
6.Excellent ɔsom & mmoa a nea ɛka ho ne pre-tɔn, wɔ-tɔn & akyi-tɔn;
7.Gye tom sɛ wopɛ sɛ woyɛ;
8.OEM / OBM som adwuma.


Nea ɛwɔ hɔ:



Bisa nsɛm

PTFE teyp kɔkɔɔ PTFE Adhesive Tape a wɔde yɛ nneɛma

Nneɛma a Wɔde Yɛ Adwuma

Aguade Ho Nkyerɛkyerɛmu

PTFE teapɔn kɔkɔɔ titiriw ama nnwuma a ɛyɛ adwuma yiye a ɛhwehwɛ sɛ wɔde nkitahodi a emu yɛ den na wotumi de ho to so, mpɛn pii no wɔ mmeae a ɛho hia sɛ ɛtra hɔ kyɛ na ɛtumi gyina ano. Wɔayɛ

Product Features a ɛwɔ Red PTFE teapɔn mu

Kɔla kɔkɔɔ no ma ɛda nsow wɔ standard white anaa PTFE tapes afoforo ho, kɔla kɔkɔɔ a ɛhyerɛn no boa ma wotumi hu bere a wode redi dwuma no, na ɛma ɛyɛ mmerɛw sɛ wobedi ho dwuma na wode asi hɔ.

a wɔde di dwuma Red PTFE teapɔn

● Wobetumi de dade, plastic ne dɔte ayɛ laminated sɛ nneɛma a ɛtwetwe nyinaa.

● Wɔ polyethylene laminators abɔso a enni awiei ho

● Wɔ roll wrapping a polyethylene laminators

● Wɔ insulation a coils sɛ class H insulating ade.

Mfiridwuma ho Nneɛma a Wɔde Yɛ Red PTFE tape

Aguade ho mmara

Ne nyinaa mu duru mm

Standard trɛw mm(in) .

Ne tɛtrɛtɛ a ɛsen biara mm(in) .

Ne tenten m

MR

0.1

10,13,19,25,30,38,50 na ɛwɔ hɔ

500

10-33 na ɛwɔ hɔ

Red PTFE Tape Yɛfoɔ

Aokai PTFE de n’adwene si so sɛ wɔde PTFE a wɔde fiberglass ntama adura ho a ɛyɛ papa ne ɔsom mu gyinapɛn a ɛkyɛn soi hɔ, wɔde bedi bwuma, na wɔasiesie no akyi na ama woahwɛ ahu sɛ ahobammɔ ne adwumayɛ a eye sen biara.

Nkɔmmɔbɔ Ahokafo

Ɛhe na wobɛtɔ Red PTFE tape?

Sɛ wowɔ nsɛmmisa biara fa Red PTFE tape , yɛsrɛ wo ntwentwɛn wo nan ase sɛ wobɛka yɛn ho wɔ mandy@akptfe.com so. Yɛde nsɛm a ɛkɔ akyiri ne mfiridwuma ho mmoa bɛma wɔ nneɛma a ɛwɔ nneɛma mu, nsɛm a wɔakyerɛkyerɛ mu, ano aduru ne akwan a wɔfa so yɛ nneɛma a wɔpɛ... Yɛma wo akwaaba sɛ kɔ yɛn adwumayɛbea hɔ!

Sɛ wopɛ nsɛmmisa anaasɛ wopɛ sɛ wokra a, yɛsrɛ wo di yɛn ho nkɔmmɔ.

Q So metumi akra custom widths anaa lengths?

A Yiw. Yɛde custom trɛw, thicknesses, ne roll tenten ma sɛnea ɛfata wo nhyehyɛe. Di yɛn adetɔn kuw no ho nkɔmmɔ na fa wo nkyerɛkyerɛmu ne dodow a wɔhwehwɛ.
Q Ɔkwan bɛn so na ɛsɛ sɛ mede teyp no sie na medi ho dwuma?

A Fa sie baabi a ɛhɔ yɛ nwini na ɛhɔ yɛ kusuu a owia hann ne ɔhyew a efi mu ba tẽẽ. Kwati sɛ wode wo ho bɛhyɛ nsu mu bere tenten. Fa nhoma mmobɔwee no sie nea wɔde ahyɛ mu mfiase no mu bere a womfa nni dwuma no.
Q Dɛn ne bere a wɔtaa de di dwuma?

A Standard nneɛma de mena wɔ adwuma nnafua 7 akyi wɔ ahyɛde a wɔahyɛ no den akyi; amanne kwan so nneɛma a wɔpaw no betumi agye bere tenten. Yɛbɛsi so dua sɛ firm lead time ne wo bɛhyɛ.
Q So ade a wɔde nkata ade so no yɛ silicone, acrylic, silicone-acetate?

A Adhesive no yɛ silicone-based, nanso, adetɔfo betumi customize acrylic-based tape, a ɛma adhesion a ɛkorɔn.
Q Nsonsonoe bɛn na ɛwɔ PTFE silicone adhesive tape ne PTFE acrylic tape ntam?

BI
Ɔhyew a wɔde yɛ adwuma

● Silicone a wɔde kyekyere nneɛma ho:

Ɔhyew a ɛkorɔn a egyina pintinn yiye na ɛkɔ so yɛ nea ɛyɛ mmerɛw wɔ ɔhyew a ɛba fam mu; a ɛfata ma thermal cycling ne gaskets/seals.

● Acrylic aduru a wɔde kyekyere nneɛma ho:

Ɔhyew a ɛyɛ adwuma yiye wɔ ne nyinaa mu nanso mpɛn pii no ɛnyɛ nea ɛyɛ mmerɛw te sɛ silicone; betumi ayɛ mmerɛw kɛse wɔ ɔhyew a ɛba fam koraa mu anaasɛ ɛbɛyɛ mmerɛw wɔ ɔhyew a ɛkɔ soro mu.

Nnuru a ɛko tia ne nneɛma a atwa yɛn ho ahyia

● Silicone a wɔde kyekyere nneɛma ho:

Nsu a ɛko tia yiye, nsu a wɔde hyɛ mu, UV a wɔde hyɛ mu (a wɔde di dwuma wɔ abɔnten), ne nnuru pii; kɔ so kura elasticity mu.

● Acrylic aduru a wɔde kyekyere nneɛma ho:

Nnuru ne UV a ɛko tia yiye ma nneɛma a atwa yɛn ho ahyia pii nanso mpɛn pii no ɛnyɛ nea ɛyɛ mmerɛw sɛ silicone; wim tebea a ɛko tia no gyina nnuru a wɔyɛ so.

Nneɛma a ɛyɛ mmerɛw vs rigidity

● Silicone a wɔde nkata PTFE so:

Ɛyɛ nea ɛyɛ mmerɛw kɛse, etumi gye kankyee, wosow, ne ɔhyew a ɛtrɛw a ɛnhwere nsɔano.

● Acrylic a wɔde nkata PTFE so:

Mpɛn pii no, ɛyɛ den; mfiase no kura mu denneennen nanso ɛnyɛ bɔne fafiri kɛse wɔ kankyee mu; eye ma nhama a ɛyɛ den na ɛyɛ tack a ɛkorɔn.

Nneɛma a Ɛfa Ho

PTFE Teyp a ɛyɛ fitaa

PTFE Sini Teyp

Nsɛm a ɛfa ho

[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Ɔkwan bɛn so na wobɛhwɛ ahu sɛ organic silicone adhesive no du botae curing degree no ho denam line ahoɔhare a coating afiri no ne fononoo tenten a ɛne no hyia ma high-temperature PTFE tape?

Saa asɛm yi ka sɛnea wɔde coating machine line ahoɔhare ne oven tenten hyia de hwɛ hu sɛ organosilicone adhesive du botae curing degree ma high-temperature PTFE tape. Core matching nnyinasosɛm: bere a wɔde tra hɔ nyinaa t_total = fononoo tenten a etu mpɔn L ÷ line ahoɔhare v ɛnsɛ sɛ ɛba fam sen bere a wɔhwehwɛ sɛ wɔde sa yare a ɛba fam koraa. Nya ayaresa su denam DSC anaa adhesive ayaresa sɔhwɛ ahorow a ɛde 'ɔhyew — ayaresa bere a ɛba fam' abusuabɔ si hɔ. Equivalent cumulative cure model: kyekyɛ fononoo mu yɛ no zones, bu ti=Li/v ne tcure(Ti), hwɛ hu sɛ ∑(ti/tcure(Ti)) ≥1. Nkontaabu akwan: hyehyɛ ɔhyew mmeae a ne tenten yɛ Li ne ɔhyew Ti; set line speed v, bu zone biara tena bere ne ntoboa ratio; iterate kosi sɛ ne nyinaa bɛyɛ ≥1 (ahobanbɔ margin 1.1-1.2 na wɔkamfo kyerɛ).
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Nsonsonoe a ɛwɔ Nkɛntɛnso a Infrared Radiation Heating ne Hot Air Cirulation Heating Curing Akwan Nya wɔ Uniformity a Cross-Linked Structure of Organosilicon Adhesive Layers

Saa asɛm yi de nsonsonoe a ɛda infrared radiation heating ne hot-air circulation heating curing akwan horow ntam toto crosslinked structure uniformity of silicone adhesive layers ho. Ɔhyew a wɔde kɔ baabi foforo: mframa a ɛyɛ hyew de ne ho to convection-conduction a ɔhyew kɔ soro brɛoo, ɔhyew mu nsonsonoe ketewaa bi a ɛwɔ mu/akyi so; IR wɔ bun a ɛhyɛn mu a anohyeto wom a ɛwɔ soro a ɛtwetwe denneennen (micrometer du kosi ɔhaha pii) a ɛma ɛyɛ sorokɔ-kɔ-mfinimfini a ɛyɛ toro. Nkɛntɛnso a ɛwɔ crosslink biakoyɛ so: mframa a ɛyɛ hyew ma wotumi yɛ synchronous curing wɔ mu ne akyi a crosslink density yɛ pɛ; IR ma soro layer yɛ ntɛmntɛm dense 'skin film' a esiw ɔhyew a ɛkɔ ne emu nkɔnsɔnkɔnsɔn kankan, ma crosslink density so tew fi soro kɔ mu.
$Dɛn ne dodow a ɛne gel fraction index a ɛwɔ silicone pressure-sensitive adhesives ne cohesive ahoɔden a adhesive layer no ntam?$

[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Dɛn ne dodow a ɛne gel fraction index a ɛwɔ silicone pressure-sensitive adhesives ne cohesive ahoɔden a adhesive layer no ntam?

Saa asɛm yi ka dodow mu nkitahodi a ɛda gel fã ne ahoɔden a ɛka bom wɔ silicone nhyɛso-te nka adhesives ma Teflon tape ntam. Gel fã = mass ɔha biara mu nkyem a ɛyɛ crosslinked network a entumi nnye toluene mu (Soxhlet extraction, 24hr). Ahoɔden a ɛka bom a ɛda adi wɔ ɔhyew a ɛkorɔn a ɛkura tumi (180°C, 1kg). Ranges abiɛsa: ase critical point (<60%) — percolating network biara nni hɔ, kura tumi a ɛbɛn zero; practical range (60-85%) — cohesive ahoɔden nyin exponentially ne gel fraction, 60%→70% ma bere a wɔde kura mu fi simma kosi nnɔnhwerew, 70%→80% ma 3-10x nkɔanim; crosslinking a ɛkorɔn (>85%) — mfasoɔ brɛoo (85%→95% 20-50% pɛ kɔ soro), tack kɔ fam kɛseɛ, >95% hwere PSA agyapadeɛ.
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Ɔkwan bɛn so na ɛsɛ sɛ wɔde peroxide crosslinking agents no hyew a ɛporɔw ne ne nkwa nna fã ne curing process window a wɔde yɛ Teflon tape no hyia?

Saa asɛm yi ka sɛnea wɔde peroxide crosslinking agents (BPO ne DCP) a ɛporɔw hyew ne ne fã nkwa nna bɛyɛ pɛ ne curing process window a wɔde yɛ Teflon tape no ho. Core data: BPO — 1-simma fã nkwa wɔ ~ 131 ° C, 1-hr wɔ ~ 92 ° C, 10-hr wɔ ~ 72 ° C; DCP — 1-min wɔ ~ 171 ° C, 1-hr wɔ ~ 135 ° C, 10-hr wɔ ~ 115 ° C. Nteaseɛ a ɛne ne ho hyia: adhesive hia 97-99% crosslinking = 5-7 fã-nkwa; bere a wɔde sa yare = 5-7 × nkwa fã wɔ ɔhyew a wɔde asi wɔn ani so no mu. Back-bu ɔhyew fi production line residence bere anaasɛ back-bu bere fi maximum a wɔma ho kwan.
[PTFE Adhesive Tape a wɔde yɛ nneɛma ] . Nsonsonoe bɛn na ɛwɔ nkɛntɛnso a infrared radiation heating ne hot-air circulation heating nya wɔ crosslinked structure a ɛwɔ silicone adhesive layer no mu no mu?

Saa asɛm yi de nsonsonoe a ɛda infrared radiation heating ne hot-air circulation heating ntam toto crosslinked structure uniformity of silicone adhesive layer ho. Ɔhyew a wɔde kɔ baabi foforo: mframa a ɛyɛ hyew yɛ convection-conduction, ɛyɛ brɛoo na ɛkɔ so, na ɛma ɔhyew a ɛkɔ soro a ɛkɔ fam; IR yɛ radiation-absorption a ɛwɔ soro absorption a emu yɛ den (micrometers kosi millimeters) a ɛma ɛyɛ mmepɔwmmepɔw soro-kɔ-mfinimfini gradient. Nkɛntɛnso a ɛwɔ crosslink density kyekyɛ so: mframa a ɛyɛ hyew ma emu ne akyi afã horow no tumi hyɛn vulcanization temperature range mu ɛkame ayɛ sɛ bere koro mu, na ɛma crosslink density a ɛyɛ pɛ wɔ thickness no mu; IR ma ɔfasu a ɛwɔ soro no sa ntɛm ara a ɛyɛ honam ani a ɛyɛ den a esiw ɔhyew a ɛkɔ baabi foforo kwan, na ɛde sharp gradient of crosslink density so tew fi soro kɔ mu ba.