PTFE Ntama Ma Ɔhyew Press

Sɛ worepaw sɛnea ne kɛse bɛyɛ a, susuw afiri pɔtee a wɔde twetwe ɔhyew, nneɛma a wode reyɛ adwuma, ne ɔhyew dodow a ɛho hia no ho. Teflon nkratafa a ɛyɛ tratraa no ye ma pɛpɛɛpɛyɛ kɛse na ɛnyɛ kɛse, bere a nkratafa a ɛyɛ den ma ɛtra hɔ kyɛ kɛse na ɛbɔ platen no ho ban yiye.

Product Features of PTFE ntama ma ɔhyew press

● 0.1 mm-0.18mm: Ɛyɛ tratraa na ɛyɛ mmerɛw, na wɔtaa de yɛ nneɛma a emu nyɛ duru.

● 0.23mm: Mfinimfini pa ma ɔhyew press dwumadie dodow no ara. Saa kɛse yi yɛ nea ɛtra hɔ kyɛ araa ma ɛyɛ daa 

de di dwuma, na ɛma ɔhyew a ɛko tia, ɛyɛ mmerɛw, ne nea ɛnyɛ den sɛ wobedi ho dwuma no kari pɛ.

● 0.35-0.4mm: Ɛma ɛyɛ den kɛse na etumi gyina ɔhyew a ɛkɔ soro anaasɛ ahoɔden a wɔde mia so. Wɔtaa de yɛ adwuma a emu yɛ duru te sɛ ntama a ɛyɛ den a wɔde mia anaasɛ bere a ɔhyew a ɛkɔ soro wɔ mu no.

● 0.5 mm: Eyi wɔ awiei a ɛyɛ den no so na ɛma ɔhyew a ɛko tia yiye na ɛtra hɔ kyɛ. Ɛyɛ papa ma mfiridwuma anaa ɔhyew afiri a emu yɛ duru pii.

PTFE ntama a wɔde di dwuma ma ɔhyew press

Baabiara a ɛho hia sɛ wɔde ɔhyew mia no, na wobetumi de ptfe ntama no ahyɛ so bere nyinaa, te sɛ ɔhyew afiri a wɔde mia nneɛma wɔ ntama ne nhoma tintim adwumayɛbea so, na ama wɔanya ɔfasu a ɛyɛ den, a ɛnkyere so wɔ ade no ne ɔhyew press platen ntam.

    

Technical Parameters a PTFE ntama ma ɔhyew press

Ntoatoasoɔ	Ahosuo	Ntrɛwmu a ɛsen biara mm	Nneɛma a Ɛyɛ Den nyinaa	Gram Mu duru (g/m2) .
PS	Beige a ɛyɛ fɛ	1250	0.08	155
	Beige a ɛyɛ fɛ	1250	0.13	250
	Beig na ɔkyerɛwee	1250	0.15	300
	Beige a ɛyɛ fɛ	1250	0.18	370
	Beige a ɛyɛ fɛ	2600	0.23	480
	Beige a ɛyɛ fɛ	2760	0.35	680
	Beige a ɛyɛ fɛ	2760	0.4	780
	Beige a ɛyɛ fɛ	2760	0.55	1100

PTFE ntama ma ɔhyew press Manufacturer

Aokai PTFE  de n’adwene si PTFE nneɛma a ɛyɛ papa ne ɔsom gyinabea a ɛkyɛn so a wɔde bɛma so. Yɛyɛ adwumayɛfo a wɔyɛ PTFE a wɔde fiberglass ntama akata so.

Yɛbɛboa wo wɔ nea edidi so yi mua ɛbɛboa wo wɔ nneɛma a edidi so yi mu: nneɛma atitiriw, nneɛma a wɔawie no yiyedi, nneɛma a wɔde kɔma, ne ɔsom adwuma a wɔyɛ wɔ adetɔn akyi. Aokai ma wo wholesale, customization, design, packaging, nnwuma ano aduru, ne OEM OBM nnwuma afoforo. Yɛn adwumayɛfoɔ R&D kuw, adwumayɛkuo, quality inspection team, technical service team, ne pre-sales & after-sales service team bɛma wo adwuma a ɛyɛ adwuma baako, akora wo bere so na woahwɛ ahu sɛ adwumayɛfoɔ a wɔyɛ adwuma no yɛ papa sen biara.

       

Nkɔmmɔbɔ Ahokafo

Ɛhe na wobɛtɔ PTFE ntama a wɔde yɛ ɔhyew press?

If you have any questions about PTFE fabric for heat press , yɛsrɛ wo ntwentwɛn wo nan ase sɛ wobɛka yɛn ho wɔ mandy@akptfe.com Yɛde nsɛm a ɛkɔ akyiri ne mfiridwuma ho mmoa bɛma wɔ nneɛma a ɛwɔ nneɛma mu, nsɛm a wɔakyerɛkyerɛ mu, ano aduru ne akwan a wɔfa so yɛ nneɛma a wɔpɛ... Yɛma wo akwaaba sɛ kɔ yɛn adwumayɛbea hɔ!

Sɛ wopɛ nsɛmmisa anaasɛ wopɛ sɛ wokra a, yɛsrɛ wo di yɛn ho nkɔmmɔ.