Teflon fini funtenimanba ka delamination phenomenon ye mun ye?

I. Delamination (Delamination) ko kɛlenw kunba

1. Jateblaw labɛncogo

Teflon fini min funteni ka bon, o ye fɛn ye min dilannen don ni fibreglasi fini ye i n’a fɔ a kɛcogo, ka a su ni politetrafluoroéthylène (PTFE) jɛnsɛnni ye, ka sɔrɔ k’a sinter ni funteni caman ye.

2. Fɛnɲɛnɛmako ɲɛfɔli

Delamination bɛ tali kɛ farali ni a sɔgɔli la PTFE sanfɛla datugulan ni kɔnɔna fibreglasi basigilen fini cɛ, walima finimugu caman cɛ, u tɛ to sirilen na tuguni.

II. Delamination (Delamination) jiracogo yelenw

1. Kurukuruw ni kurukuruw bɔli

Bugun kɔrɔtalenw bɛ bɔ fini sanfɛ, ni u bɛ kɛ ni dingɛ ye ni u digilen don—o ye delamination taamasiɲɛ fɔlɔ ye.

2. Layɛrɛw ni ɲɔgɔn cɛ Peeling

A sanfɛla datugulan bɛ se ka bɔ nɔgɔya la sɛbɛnw kɔnɔ i n’a fɔ filimu finman, ka fibreglasi finman bɔ kɛnɛ kan min bɛ a jukɔrɔ.

3. Yɔrɔw ka Whitening ani Flaking

Ni a kɛra funteni walima a sɔgɔlen kɔfɛ, a ɲɛda bɛ kɛ fin fɔlɔ, o kɔfɛ, a bɛ kɛ ka finimugu kari ani ka a sɔgɔsɔgɔ ka kɛ fɛn ye.

III. Delamination sababuba minnu bɛ yen

1. Tiɲɛni min bɛ kɛ ni degun ye min bɛ sɔrɔ funteni fɛ

Baara kɛli min bɛ mɛn funteni na, o bɛ kɔnɔna degun bila PTFE ni fibreglasi cɛ k’a sababu kɛ u ka funteni bonya coefficients danfaralenw ye. So funteni ni nɛnɛ teliya fana bɛ se ka kɛ sababu ye ka finimugu bɔ.

2. Sɛnɛfɛnw dilanni jogoɲumanya dɛsɛw

Fibreglasi fini sanfɛla furakɛcogo ɲuman, PTFE impregnation jugu, walima sintering ka ɲɛ, o bɛ se ka kɛ sababu ye ka ɲɛda ni ɲɔgɔn cɛ jɛɲɔgɔnya barika dɔgɔya a danma.

3. Nɔrɔli Dɛsɛ

Fɛn dɔw la, PTFE filimu sirilen bɛ basigi fini na ni nɛgɛw ye, a bɛ se ka kɛ ko nɔrɔlan tɛ se ka funteni caman muɲu, o bɛ na ni delamination directe ye.

4. Sɛgɛn min bɛ kɛ ni masinw ye

Ni aw bɛ segin-ka-bɔnye kɛ, ka a kɔrɔta ni tensionba ye, ani kɛnɛma fanga wɛrɛw bɛ to ka finimugu ni basigi fini cɛsira tiɲɛ.

5. Binkanni min bɛ kɛ ni kemikɛli ye

Asidi barikamaw, alkali barikamaw, walima furajiw bɛ se ka don finimugu dacogo la, ka kɛ sababu ye ka sɔgɔsɔgɔ ani ka sirili fanga bɔnɛ.

IV. Farati tilennen minnu bɛ sɔrɔ Delamination na ani u dɔnni fɛɛrɛ nɔgɔmanw

1. Baarakɛcogo min tɛ bere ye, o bɔnɛ

Ni finimugu bɔra, fibreglasi bɛ bɔ kɛnɛ kan, wa fɛnw bɛna nɔrɔ fini sanfɛla la kosɛbɛ, ka a bɔli baara ban.

2. Fanga dɔgɔyali kosɛbɛ

Fibreglasi min tɛ lakana sisan ni finimugu ye, o bɛ kɛ sababu ye ka kari ani ka lajɔ, o bɛ kɛ sababu ye ka fini min funteni ka bon, o bɛ tiɲɛ joona.

3. Fɛn dilannenw nɔgɔli

Datugulan nɔgɔ minnu bɔra ɲɔgɔn na, olu bɛ se ka fɛnw nɔgɔ k’u ɲɛsin fɛnw ma minnu bɛ baara kɛ, i n’a fɔ dumuni walima finiw.

4. Danfaracogo nɔgɔman

Aw bɛ baara kɛ ni nɛgɛ ye walasa ka yɔrɔ dɔ sɔgɔ dɔɔni dɔɔni min tɛ ye. Ni finimugu bɛ se ka kɔrɔta nɔgɔya la i n’a fɔ plastiki fari, delamination bɛ se ka dafa.

Kunnafoni minnu bɛ sanfɛ, olu bɛ di Jiangsu Aokai Kura Materiel Teknoloji Co., Ltd.

N’aw b’a fɛ ka kunnafoni caman sɔrɔ an ka fɛn dilannenw bɛɛ lajɛlen ka fɛn ɲɛfɔlenw kan, u kɛcogo, ani u labɛncogo fɛɛrɛw kan, i n’a fɔ Teflon fini min bɛ funteni caman bɔ, Teflon kasɛti min bɛ funteni caman bɔ, Teflon kasɛti min bɛ funteni caman bɔ, cɛsirilan minnu tɛ sɔgɔsɔgɔ, minnu bɛ kɛ ka siri masinw na, fini PTFE fan kelen, fɛnɲɛnamafagalan minnu bɛ se ka funteni caman kɛlɛ, ani fibreglasi fini min bɛ se ka funteni caman kɛlɛ, aw bɛ se ka anw sɔrɔ nin fɛn ninnu fɛ:

Baarakɛyɔrɔ telefɔni nimɔrɔ:

Cɛ Guo +86 18944819998

Cɛ Liu +86 13705266308

An bɛ tugu baarakɛcogo hakilila la tuma bɛɛ min bɛ se ka kɛ baarakɛlaw ye ani min bɛ se ka da a kan, wa an b’an jija ni an dusukun bɛɛ ye ka furaw di aw ma yɔrɔ kelen na ani ka baara kɛ ni hakili ye!