Walasa ka cogoya juguw & baarakɛcogo banbali sɔrɔ
i ka baarakɛla dannamɔgɔ min bɛ PTFE Film Tape kama

I bɛ baara teliya: Surface non-stick, Baara teliya

I bɛ nafa caman sɔrɔ: Tiɲɛni dɔgɔya, tɔnɔ caman

ƝƐNABƆLI ƝƐNABƆLI

So » Fɛn minnu bɛ dilan » PTFE Bande Adhesif » PTFE Film Kasɛti » Kasɛti PTFE finman

Bande PTFE fin

PTFE Tape finman bɛ wele fana ko PTFE Adhesive Tape.

1.Nin surface bɛ ni ɲuman non adhesion ani sliding property ye;
2.Kuran insulasi ɲuman;
3.A bɛ se ka kɛ funteni hakɛ caman na;
4.Good tiɲɛni tension resistance;
5.Seereyaw: ISO 9001:2015, FDA;
6.Excellent service & support o la ka kɔn feereli ɲɛ, feereli kɔnɔ & feereli kɔfɛ;
7.Sɔn ka kɛɲɛ ni mɔgɔw sago ye;
8.OEM / OBM baara.


A sɔrɔli:



Aw ye ɲininkali kɛ

Bande ptfe finman PTFE Bande Adhesif

Fɛn dilannenw ka kulu

Fɛn dilannenw ɲɛfɔli

PTFE kase finman , min dilannen don ni politetrafluoroéthylène (PTFE) ye, a bɛ se ka funteni caman, kemikɛlifɛnw ani degunba kɛlɛ cogo ɲuman na.

Fɛn minnu bɛ kɛ ka ɲɛsin White ptfe tape ma

PTFE fibreglasi kase kulɛri min bɛ sɔrɔ tuma bɛɛ, o ye bulama ye, ani PTFE filimu kase kulɛri ye nɛrɛmuguma ye, o bɛɛ n’a ta AOKAI kɔnɔ, an bɛ kulɛri finman fɛnw di PTFE fibreglasi kase ni PTFE filimu kase ma a bɛ se ka fɔ ko u bonya bɛɛ.

Baarakɛcogo minnu bɛ kɛ ni White ptfe tape ye

● Funteni sirili: PTFE fibreglasi nɔrɔli kaseti bɛ kɛ ka caya funteni datugulan masinw na yan o kase bɛ yɔrɔ di min tɛ nɔrɔ ka bɔrɔw, filimuw walima laminiw datugu funteni caman na.

● Funteni-minɛnw: Fini, finiw ani filimuko baarakɛyɔrɔw la, kaseti bɛ kɛ ka funteni-minɛnw platiw, nɔgɔw walima yɔrɔ wɛrɛw lakana minnu bɛ funteni caman na, bawo a bɛ nɔrɔli bali, wa a bɛ a to saniya ka nɔgɔn.

● Cɛsirilanw : A ka c’a la, PTFE fibreglasi nɔrɔlen bɛ kɛ fɛnɲɛnamafagalanw sanfɛ minnu tɛ funteni kɛlɛ, kɛrɛnkɛrɛnnenya la minnu bɛ kɛ tobili, ja ani kɛnɛyali la, o yɔrɔ la, a bɛ fɛnw bali ka nɔrɔ ani ka a to u ka baara ka ɲɛ funteni caman na.

Paramètres techniques de kasɛti ptfe jɛman

Fɛn dilannenw ka kode	A janya bɛɛ lajɛlen ye mm	Largeur standard mm(in) ye.	Bonya min ka bon kosɛbɛ mm(in) .	Janya m
GP-W ye baara kɛ	0.13	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.16	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.18	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.2	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.23	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.25	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.28	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.3	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ
	0.35	10,13,19,25,30,38,50 ye	1000	10-100 kɔnɔ

Fɛn dilannenw ka kode	A janya bɛɛ lajɛlen ye mm	Largeur standard mm(in) ye.	Bonya min ka bon kosɛbɛ mm(in) .	Janya m
MW	0.08	10,13,19,25,30,38,50 ye	500	10-33 la
	0.13	10,13,19,25,30,38,50 ye	500	10-33 la
	0.18	10,13,19,25,30,38,50 ye	500	10-33 la
	0.25	10,13,19,25,30,38,50 ye	500	10-33 la

Kasɛti PTFE finman Dilanbaga

Aokai PTFE b’a sinsin PTFE finimugu fibreglasi fini ɲumanba dicogo kan ani baarakɛcogo ɲumanba. An ye PTFE finiko fibreglasi fini dilannikɛlaw ye minnu bɛna aw dɛmɛ nin ko ninnu na: fɛn jɔnjɔnw, fɛn dilannenw ka ɲumanya, u lasecogo, ani feereli kɔfɛ baara. Aokai bɛ fɛn caman di aw ma, ka fɛnw kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka fɛnw dilan, ka u pakew dilan, ka izini furakɛli, ani OEM OBM baara wɛrɛw. An ka baarakɛlaw ka R&D jɛkulu, fɛn dilanni jɛkulu, jogoɲini jɛkulu, fɛɛrɛbɔ jɛkulu, ani sanni feereli & feereli kɔfɛ baarakɛjɛkulu bɛna baara kɛ aw ye yɔrɔ kelen na, k’aw ka waati kisi ani ka baarakɛlaw ka fɛn dilannenw jogo ɲuman sabati.

Jɛkafɔ jɛɲɔgɔnw

Kase ptfe jɛman bɛ san min?

Ni aw ye ɲininkali dɔw kɛ White ptfe tape , aw kana siga ka anw sɔrɔ nin yɔrɔ in na mandy@akptfe.com ye . An bɛna kunnafoni caman di ani fɛɛrɛko dɛmɛni fɛn dilannenw cogoyaw kan, u ɲɛfɔcogo, u ɲɛnabɔcogo ani u ladilancogo suganditaw... Aw ni ce ka na an ka izini na!

Ni aw b’a fɛ ka ɲininkaliw kɛ walima ka komandi kɛ, aw b’aw deli aw ka kuma an fɛ.

Q Yala ne bɛ se ka komandi kɛ ka kɛɲɛ ni ladamu bonya walima janya ye wa?

A Ɔwɔ. An bɛ fɛnw di minnu bɛ kɛ ka kɛɲɛ ni i ka baarakɛcogo ye. Aw ye kuma an ka feerekɛlaw ka jɛkulu fɛ n’aw ka fɛnw ɲɛfɔcogo ye ani hakɛ wajibiyalenw.
Q Ne ka kan ka kaseti mara ani ka a minɛ cogo di?

A A mara yɔrɔ nɛnɛman ni jalen na, yɔrɔ min ka jan tile yeelen ni funteni sɔrɔyɔrɔw la. Aw bɛ aw yɛrɛ tanga jisuma ma waati jan kɔnɔ. Aw bɛ rollo bila a foroko fɔlɔ kɔnɔ ni aw tɛ baara kɛ ni a ye.
Q Kunnafoni-falen-falen waati cogoya ye mun ye?

A Standard fɛnw bɛ ci baarakɛdon 7 kɔnɔ komandi dafalen kɔfɛ; ladamu sugandiliw bɛ se ka waati jan ta. An bɛna waati jɔnjɔn dɔ sigi sen kan ni aw ye komandi la.
Q Yala a nɔrɔlen bɛ kɛ ni silikoni ye, akiriliki, silikoni-asetati wa?

A Nɛgɛdaga ye silikɔni ye, nka, kiliyan bɛ se ka kaseti kɛ ka kɛɲɛ ni acrylique ye, o bɛ nɔrɔli caman di.
Q Danfara jumɛn bɛ PTFE silikoni nɔrɔlen ni PTFE akiriliki kase cɛ?

KELEN
Funteni kɛcogo

● Silikoni nɔrɔlan:

Funteni caman sabatili ɲuman ani a bɛ to ka wuli funteni dɔgɔyalen na; min bɛnnen don thermal cycling ani gaskets/seals ma.

● Nɛgɛ min bɛ kɛ ni acrylique ye:

Funteni bɛɛ lajɛlen kɛcogo ɲuman nka a ka c’a la, a tɛ se ka wuli i n’a fɔ silikɔni; a bɛ se ka kɛ fɛn ye min bɛ kari ni funteni dɔgɔyara kosɛbɛ walima ka nɔgɔya ni funteni ka bon.

Furakɛcogo ni sigida

● Silikoni nɔrɔlan:

A bɛ se ka jisuma, ji su ji la, UV tali (kɛnɛma baara kama), ani kemikɛlifɛn caman kunbɛncogo ɲuman; bɛ elasticité (lasikili) mara.

● Nɛgɛ min bɛ kɛ ni acrylique ye:

Kemikɛli ni UV kɛlɛli ɲuman sigida caman na nka a ka c’a la, a tɛ se ka wuli ka tɛmɛ silikoni kan; waati cogoya kɛlɛli bɛ bɔ furakɛlicogo de la.

Flexibilité vs rigidité (sɔgɔsɔgɔninjɛ).

● Silikoni nɛgɛ min bɛ PTFE kan:

A bɛ se ka fɛn caman sɛgɛsɛgɛ, a bɛ se ka lamaga, yɛrɛyɛrɛ ani funteni bonya minɛ k’a sɔrɔ a ma bɔnɛ a sigilan na.

● Akiriliki nɛgɛ min bɛ PTFE kan:

A ka c’a la, a ka gɛlɛn; fɔlɔ minɛni barikama nka yafabaliya ka dɔgɔ ni lamaga ye; a ka fisa ni bond gɛlɛnw ye, minnu bɛ tack sanfɛ.

Fɛn minnu bɛ tali kɛ ɲɔgɔn na

Bande PTFE bilenman

PTFE Film Kasɛti

Barokun minnu bɛ tali kɛ o ko la

[PTFE Bande Adhesif ] . PTFE Tape Salt Spray Resistance & Kɔgɔjida la a kɛcogo wajibiyalenw

PTFE kaseti funteni caman bɛ kɔgɔ fiyɛli kunbɛncogo ɲuman na, nka a barika ka dɔgɔn a nɔrɔlen ni fibreglasi substrat dakunw ye. Jateminɛ kɛcogo : 1000h neutre salt spray (NSS) sɛgɛsɛgɛli, ka ɲɛgɛnɛsira fanga maracogo suman (≥80% wajibiyalen don), ɲɛnayeli dɛsɛ (kɔrɔta, kurukuru), ani nɛgɛdaga sɔgɔli. Kɔgɔjida la ani kɔgɔ caman bɛ yɔrɔ minnu na: aw bɛ silikoni PSA kɛ (a tɛ akiriliki ye), ka PTFE substrat min falen don a la kosɛbɛ, ka dakunw datugu ni finimugu ye min bɛ se ka waati kɛlɛ, ani ka primer kɛ nɛgɛw kan.
[PTFE Bande Adhesif ] . PTFE Tape Reusability: Cogo min na ka segin-ka-bɔnye kɛcogo ɲɛ

PTFE kaseti funteni caman bɛ bɔnɛ a nɔrɔli la a tali kɔfɛ siɲɛ caman ka a sababu kɛ a yɔrɔ nɔgɔli ye (buguri, silikɔni tulu), nɔrɔli sirili dɛsɛ (tolen), walima substrat sirili barikama. Furakɛcogo : silikɔni PSA min bɛ ɲɔgɔn cɛ kosɛbɛ (a jiginni ka dɔgɔn, tack/holding power balanced), primer furakɛli PTFE substrat kan, fibreglasi kɔkanna dense, ani a minɛcogo ɲuman (yɔrɔ saniyalenw, a ɲɛ nɛnɛman, angle 180°). Kɔrɔbɔli hakɛlama bɛ ɲɛtaa sabati.
[PTFE Bande Adhesif ] . PTFE Tape Shelf Life: Aw ka kan ka min dɔn walasa ka a mara ka ɲɛ

PTFE kaseti funteniman min maralen don cogoya kɛrɛnkɛrɛnnenw na (10-25°C, 40-70% RH, yɔrɔ min ka jan UV/tansiyɔn gɛlɛn na) o bɛ se ka kɛ kalo 3-6 kɔnɔ (a hakɛ fɔlɔ bɛ se kalo 12 ma). Tiɲɛni dakun jɔnjɔnw : a ɲɛkisɛ fanga man kan ka jigin ka tɛmɛ 70% kan a nafa fɔlɔ la; nɔrɔlen tolen si tɛ sɔrɔ funteni caman bɔli kɔfɛ; karɔbɔli walima kari tɛ kɛ funteni hakɛ dantigɛlen na. Sɛgɛsɛgɛli teliya la: bololabaarakɛlaw ka labɔli dusukunnata, 260°C tolenw sɛgɛsɛgɛli, ani lamination shrinkage sɛgɛsɛgɛli.
[PTFE Bande Adhesif ] . PTFE kasɛti wulilen bali cogo min na ka nɔrɔ a yɛrɛ la waati jan kɔnɔ

PTFE kaseti kurulen bɛ se ka kɛ sababu ye ka nɔrɔli (blocking) ni nɔrɔli jiginni kɛ a marali waati jan kɔnɔ. A sababuw: PTFE film elastic memory ani silicone PSA bɛ wuli degun/funteni kɔrɔ. Bana kunbɛnni : gradient winding tension (kɛnɛma sirilen, kɔnɔna lafiyalen) dilanni waati, ka fara a bɔli kan fan min tɛ nɔrɔ. Aw bɛ a mara -15°C fo 40°C, 30-70% RH, ka a bila jirisunw kan, ka rollow wuli kalo saba o kalo saba. Walasa ka nɔrɔmugumuguw sɔrɔ, aw bɛ bɔli papiye fara a kan layiniw ni ɲɔgɔn cɛ.
[PTFE Bande Adhesif ] . PTFE kasɛti la dabila ka nɔrɔ u marali waati: Gradient Winding Tension Design

PTFE kaseti minnu ka funteni ka bon, n’u maralen bɛ roll cogo la, olu bɛ se ka tɔɔrɔ ni nɔrɔli ye ɲɔgɔn cɛ (blocking) ani nɔrɔli jiginni fɛ fan min tɛ nɔrɔ. A sababu juguw: PTFE film elastic memory ani silicone PSA bɛ wuli degun ni funteni kɔrɔ. Fɛnɲɛnɛma : gradient winding tension – a sirilen don kɛnɛma layɛrɛw kan, a bɛ lafiya kɔnɔna layɛrɛw kan – ka baara kɛ ni tension control ye min bɛ kɛ ni jiribolo dagalen ye. Aw bɛ a dafa ni bɔli dacogo ye, ka a mara ka ɲɛ (15-40°C, 30-70% RH), ka a bila tilennen na, ani ka rollo wuli kalo saba o kalo saba.

1
2
3
4
...
29
»

U bɛɛ lajɛlen ye ɲɛ 29 ye Taga ɲɛ kan
Ka taa

Bande PTFE fin

Fɛn dilannenw ka kulu

Fɛn minnu bɛ kɛ ka ɲɛsin White ptfe tape ma

Baarakɛcogo minnu bɛ kɛ ni White ptfe tape ye

Paramètres techniques de kasɛti ptfe jɛman

Kasɛti PTFE finman Dilanbaga

Jɛkafɔ jɛɲɔgɔnw

Kase ptfe jɛman bɛ san min?

Q Yala ne bɛ se ka komandi kɛ ka kɛɲɛ ni ladamu bonya walima janya ye wa?

Q Ne ka kan ka kaseti mara ani ka a minɛ cogo di?

Q Kunnafoni-falen-falen waati cogoya ye mun ye?

Q Yala a nɔrɔlen bɛ kɛ ni silikoni ye, akiriliki, silikoni-asetati wa?

Q Danfara jumɛn bɛ PTFE silikoni nɔrɔlen ni PTFE akiriliki kase cɛ?

Fɛn minnu bɛ tali kɛ ɲɔgɔn na

Barokun minnu bɛ tali kɛ o ko la

LINKS TELIKANW

ƝƐNABƆLI ƝƐNABƆLI