Walasa ka cogoya juguw & baarakɛcogo banbali sɔrɔ
i ka baarakɛla dannamɔgɔ min bɛ PTFE Film Tape kama

I bɛ baara teliya: Surface non-stick, Baara teliya

I bɛ nafa caman sɔrɔ: Tiɲɛni dɔgɔya, tɔnɔ caman

ƝƐNABƆLI ƝƐNABƆLI

So » Fɛn minnu bɛ dilan » PTFE Bande Adhesif » PTFE Film Kasɛti » PTFE kasɛti bilenman

Bande PTFE bilenman

PTFE Tape bilenman bɛ wele fana ko PTFE Adhesive Tape.

1.Nin surface bɛ ni ɲuman non adhesion ani sliding property ye;
2.Kuran insulasi ɲuman;
3.A bɛ se ka kɛ funteni hakɛ caman na;
4.Good tiɲɛni tension resistance;
5.Seereyaw: ISO 9001:2015, FDA;
6.Excellent service & support o la ka kɔn feereli ɲɛ, feereli kɔnɔ & feereli kɔfɛ;
7.Sɔn ka kɛɲɛ ni mɔgɔw sago ye;
8.OEM / OBM baara.


A sɔrɔli:



Aw ye ɲininkali kɛ

Kasɛti PTFE bilenman PTFE Bande Adhesif

Fɛn dilannenw ka kulu

Fɛn dilannenw ɲɛfɔli

PTFE kase bilenman dabɔra kɛrɛnkɛrɛnnenya la baarakɛcogo ɲumanw kama minnu bɛ jɛɲɔgɔnya barikama de wajibiya, min bɛ se ka da a kan, tuma caman na sigidaw la, yɔrɔ minnu na, muɲuli ni muɲuli nafa ka bon.

ka fɛn dilannenw cogoyaw PTFE kasɛti bilenman

Kulɛri bilenman b’a danfara ka bɔ kasɛti finman jɔnjɔnw na walima PTFE kaseti wɛrɛw la, kulɛri bilenman jɛman bɛ dɛmɛ don ka yecogo ye a kɛtuma na, o b’a to a minɛcogo n’a bilali ka nɔgɔn.

kɛcogo Kasɛti PTFE bilenman

● A bɛ se ka lamini ni nɛgɛw, plastikiw ani seramiki ye i n’a fɔ fɛn bɛɛ lajɛlen minnu bɛ sɛgɛn.

● Ka ɲɛsin polietilɛni laminiw cɛsirilanw ma minnu tɛ ban

● Walasa ka poliyetilɛni laminiw siri

● Walasa ka bobinew insulasi i n’a fɔ klasi H insulating material.

Paramètres techniques de kasɛti PTFE bilenman

Fɛn dilannenw ka kode

A janya bɛɛ lajɛlen ye mm

Largeur standard mm(in) ye.

Bonya min ka bon kosɛbɛ mm(in) .

Janya m

MR

0.1

10,13,19,25,30,38,50 ye

500

10-33 la

PTFE Kasɛti bilenman Dilanbaga

Aokai PTFE b’a sinsin PTFE finimugu fibreglasi fini ɲumanba dicogo kan ani baarakɛcogo ɲumanba. An ye PTFE finiko fibreglasi fini dilannikɛlaw ye minnu bɛna aw dɛmɛ nin ko ninnu na: fɛn jɔnjɔnw, fɛn dilannenw ka ɲumanya, u lasecogo, ani feereli kɔfɛ baara. Aokai bɛ fɛn caman di aw ma, ka fɛnw kɛ ka kɛɲɛ ni mɔgɔw sago ye, ka fɛnw dilan, ka u ka pakew dilan, ka izini furakɛli, ani OEM OBM baara wɛrɛw. An ka baarakɛlaw ka R&D jɛkulu, fɛn dilanni jɛkulu, jogoɲini jɛkulu, fɛɛrɛbɔ jɛkulu, ani sanni feereli & feereli kɔfɛ baarakɛjɛkulu bɛna baara kɛ aw ye yɔrɔ kelen na, k’aw ka waati kisi ani ka baarakɛlaw ka fɛn dilannenw jogo ɲuman sabati.

Jɛkafɔ jɛɲɔgɔnw

Kaseti PTFE bilenman bɛ se ka san min?

Ni aw ye ɲininkali dɔw kɛ Red PTFE tape kan , aw kana siga ka anw sɔrɔ nin yɔrɔ in na mandy@akptfe.com ye . An bɛna kunnafoni caman di ani fɛɛrɛko dɛmɛni fɛn dilannenw cogoyaw kan, u ɲɛfɔcogo, u ɲɛnabɔcogo ani u ladilancogo suganditaw... Aw ni ce ka na an ka izini na!

Ni aw b’a fɛ ka ɲininkaliw kɛ walima ka komandi kɛ, aw b’aw deli aw ka kuma an fɛ.

Q Yala ne bɛ se ka komandi kɛ ka kɛɲɛ ni ladamu bonya walima janya ye wa?

A Ɔwɔ. An bɛ fɛnw di minnu bɛ kɛ ka kɛɲɛ ni i ka baarakɛcogo ye. Aw ye kuma an ka feerekɛlaw ka jɛkulu fɛ n’aw ka fɛnw ɲɛfɔcogo ye ani hakɛ wajibiyalenw.
Q Ne ka kan ka kaseti mara ani ka a minɛ cogo di?

A A mara yɔrɔ nɛnɛman ni jalen na, yɔrɔ min ka jan tile yeelen ni funteni sɔrɔyɔrɔw la. Aw bɛ aw yɛrɛ tanga jisuma ma waati jan kɔnɔ. Aw bɛ rollo bila a foroko fɔlɔ kɔnɔ ni aw tɛ baara kɛ ni a ye.
Q Kunnafoni-falen-falen waati cogoya ye mun ye?

A Standard fɛnw bɛ ci baarakɛdon 7 kɔnɔ komandi dafalen kɔfɛ; ladamu sugandiliw bɛ se ka waati jan ta. An bɛna waati jɔnjɔn dɔ sigi sen kan ni aw ye komandi la.
Q Yala a nɔrɔlen bɛ kɛ ni silikoni ye, akiriliki, silikoni-asetati wa?

A Nɛgɛdaga ye silikɔni ye, nka, kiliyan bɛ se ka kaseti kɛ ka kɛɲɛ ni acrylique ye, o bɛ nɔrɔli caman di.
Q Danfara jumɛn bɛ PTFE silikoni nɔrɔlen ni PTFE akiriliki kase cɛ?

KELEN
Funteni kɛcogo

● Silikoni nɔrɔlan:

Funteni caman sabatili ɲuman ani a bɛ to ka wuli funteni dɔgɔyalen na; min bɛnnen don thermal cycling ani gaskets/seals ma.

● Nɛgɛ min bɛ kɛ ni acrylique ye:

Funteni bɛɛ lajɛlen kɛcogo ɲuman nka a ka c’a la, a tɛ se ka wuli i n’a fɔ silikɔni; a bɛ se ka kɛ ka sɔgɔsɔgɔ kosɛbɛ ni funteni dɔgɔyara kosɛbɛ walima ka nɔgɔya ni funteni ka bon.

Furakɛcogo ni sigida

● Silikoni nɔrɔlan:

A bɛ se ka jisuma, ji su ji la, UV tali (kɛnɛma baara kama), ani kemikɛlifɛn caman kunbɛncogo ɲuman; bɛ elasticité (lasikili) mara.

● Nɛgɛ min bɛ kɛ ni acrylique ye:

Kemikɛli ni UV kɛlɛli ɲuman sigida caman na nka a ka c’a la, a tɛ se ka wuli ka tɛmɛ silikoni kan; waati cogoya kɛlɛli bɛ bɔ furakɛlicogo de la.

Flexibilité vs rigidité (sɔgɔsɔgɔninjɛ).

● Silikoni nɛgɛ min bɛ PTFE kan:

A bɛ se ka fɛn caman sɛgɛsɛgɛ, a bɛ se ka lamaga, yɛrɛyɛrɛ ani funteni bonya minɛ k’a sɔrɔ a ma bɔnɛ a sigilan na.

● Akiriliki nɛgɛ min bɛ PTFE kan:

A ka c’a la, a ka gɛlɛn; fɔlɔ minɛni barikama nka yafabaliya ka dɔgɔ ni lamaga ye; a ka fisa ni bond gɛlɛnw ye, minnu bɛ tack sanfɛ.

Fɛn minnu bɛ tali kɛ ɲɔgɔn na

Bande PTFE fin

PTFE Film Kasɛti

Barokun minnu bɛ tali kɛ o ko la

[PTFE Bande Adhesif ] . Teflon fiyɛta kasɛti min bɛ se ka fiɲɛ bila, o ka mikroporozɛni jɔcogo bɛ se ka fiɲɛ doncogo ni insulasi ni a tɛ nɔrɔ cogo min na, o balansi cogo di?

Nin barokun bɛ kuma cogo min na Teflon fiyɛta (PTFE) kasɛti min bɛ fiɲɛ bila, o ka sigicogo mikroporozɛni bɛ fiɲɛ doncogo ni insulasi ni a tɛ nɔrɔ cogo min na, o bɛ bɛn ɲɔgɔn ma. Core conflict : fiɲɛ doncogo bɛ da wulilenw de wajibiya, ka sɔrɔ insulasi bɛ density de wajibiya ani non-stick bɛ yɔrɔ nɔgɔlenw de wajibiya. Dilancogo balannenw : ka poroze cɛmancɛ hakɛ kɔlɔsi (0,1-2μm, a ka fisa <0,5μm) walasa ka bɔgɔdaga doncogo bali ani ka tiɲɛni tension mara; porosité kɔlɔsili 50-70% (≈60% optimal) ka Gurley 20-100s/100cc sɔrɔ ani dielektriki fanga ≥2kV filimu 0,13mm kama; ka 3D rezo pores structure (τ≈2.5-4) ta min ka tortuosité haute (τ≈2.5-4) walasa ka jibɔ sira tilennenw damatɛmɛ; ka pores structure asymétrique gradient dilan ni dense surface layer (1-5μm) ye walasa ka non stick/insulation ani porous kɔnɔna na walasa ka ninakili sɔrɔ; aw bɛ super-oleophobe/hydrophobique surface kɛ furakɛli kɔfɛ ka sɔrɔ a ma pores block.
[PTFE Bande Adhesif ] . PTFE High-Temperature Tape ka Adhesive Residue & Adhesive Bleed bali cogo min na ni aw bɛ PCB Sanu bolokɔninw lakana SMT Mounting kɔnɔ

Nin barokun in bɛ fɛɛrɛ sigilenw di walasa ka nɔrɔlenw tolenw ni nɔrɔlenw joli bali ni aw bɛ baara kɛ ni PTFE kaseti ye min funteni ka bon walasa ka PCB sanu bolokɔninw lakana SMT lajɛ waati. Jusigi sababu sɛgɛsɛgɛli : tolen bɛ sɔrɔ jɛɲɔgɔnya dɛsɛ fɛ walima fɛnw ni ɲɔgɔn cɛ jiginni fɛ; joli bɛ bɔ viscosity drop ani adhesive overflow fɛ reflow heat kɔrɔ. Fura koloma ye kaseti sugandili ɲuman ye : silikoni PSA min kuntaala surun ≥300°C, min bɛ to senna ≥260°C, a janya bɛɛ lajɛlen ye milimɛtɛrɛ 0,08-0,13 ye ni nɔrɔlan finmanw ye minnu bɛ ɲɔgɔn minɛ kosɛbɛ, ani seereyaw min tɛ joli/tolenw kɛlɛ. Taabolo kɔlɔsili fɛɛrɛ wɔɔrɔ : saniya ka kɔn lamini ɲɛ ni IPA ye ; zeru-tension lamination ni fiɲɛ bɔli dafalen ye; segin-ka-bɔnye funteni hakɛ ɲɛnabɔlen ni funteni nɔgɔman ye (<2°C/s); nɛnɛba bɔli 50°C duguma ni 180° ye; baara kɛli teliya la sanga 24 kɔnɔ ani baara kɛli siɲɛ kelen dɔrɔn; dɛsɛ furakɛli ni IPA wiping ani 40-50x magnifier sɛgɛsɛgɛli ye. Ni PCB fan fila bɛ u la, aw bɛ u falen ni kaseti kura ye sani aw ka kɛ fan filanan baara la.
[PTFE Bande Adhesif ] . Baarakɛcogo jiralan kolomaw minnu ka kan ka jateminɛ ni aw bɛ PTFE kasɛti kɛ funteni caman na, fɛnɲɛnamafagalanw dacogo la, fɛnɲɛnamafagalan funteni furakɛli la ani fɛnɲɛnamafagalan lamini wɛrɛw la

Nin barokun bɛ baara kɛcogo jiralan jɔnjɔnw ɲɛfɔ PTFE funteni caman kasɛti la min bɛ kɛ ni fɛnɲɛnamafagalanw dacogo ye, fɛnɲɛnamafagalan funteni furakɛli ani o ɲɔgɔnna sigidaw la. Fɛn minnu ka kan ka kɛ, olu ni fiɲɛ baarakɛcogo tɛ kelen ye kosɛbɛ: gazi bɔli de ka bon kosɛbɛ (TML≤1%, CVCM≤0,1%; aerospace/optical grades bɛ TML≤0.5%, CVCM≤0,01% de wajibiya); funteni kunbɛncogo ka kan ka sɛgɛsɛgɛ PTFE substrat (260°C) ni nɔrɔlan fila bɛɛ la; silikɔni PSA min saniyalen don kɛrɛnkɛrɛnnenya la, min gazi ka dɔgɔn, o de ka kan ka kɛ walasa ka siloksan nɔgɔli bali; funteni minɛ fanga min ka bon, o bɛ creep ni edge lifting bali; saniya tɛ fiɲɛ bɔli wajibiya ani ionw hakɛ dɔgɔyali; kase anti-statique (surface resistivity 106-109 Ω/sq) bɛ ESD tiɲɛni bali; plasma resistance ka kan ka jateminɛ ka ɲɛsin sputtering/PECVD taabolo ma; funteni dɔgɔyali min bɛ 2% duguma, o bɛ masɔrɔcogo ɲuman sabati.
[PTFE Bande Adhesif ] . PTFE fini min bɛ funteni caman na, o kɛcogo lastikuw la

Fibreglasi fini min datugulen don ni PTFE ye, o bɛ kɛ ka caya lastikuw dilanni na, k’a sababu kɛ a tɛ funteni kunbɛn, a tɛ nɔrɔ, ani a tɛ sɔgɔsɔgɔ kosɛbɛ. Baara kunbaba minnu bɛ kɛ, olu ye : fɛnw bɔli fɛnw ye minnu bɛ kɛ ka plati/vacuum vulcanization ani tire molding; fɛnɲɛnamafagalan minnu tɛ nɔrɔ, olu bɛ kɛ mansin dafalenw, kalandriya ani nɛnɛ siraw kama; fini min bɛ don ɲɔgɔn na walasa ka lastikuw mara minnu tilalen don ɲɔgɔn na; silikoni ni fluororuber minɛcogo kɛrɛnkɛrɛnnen; ani foroko sanubɔlanw walasa ka kɛnɛya kɔfɛ. Nafa minnu bɛ sɔrɔ a la, olu ye ka nɔgɔ nɔrɔli ban, ka dɔ bɔ fura bɔlenw tali la, ka wuluwuluw sirili bali, ani ka nɔgɔ bɔli nɔgɔya.
[PTFE Bande Adhesif ] . Sugandili gafe min bɛ kɛ PTFE kasɛti funteniman na min bɛ kɛ ka pikiri kɛli masinw demolding & Anti-Stick applications kɛ

Nin gafe in bɛ PTFE kasɛti sugandili kan min ka funteni ka bon pikirijikɛlan demolding ni anti-stick baarakɛcogo la. Sugandili min sinsinnen bɛ funteni kan : ≤260°C plastiki caman na (silikon PSA kase standard, 0,13-0,18mm); 260-300°C ka ɲɛsin ɛntɛrinɛti plastikiw ma minnu ka funteni ka bon i n’a fɔ PC, PA66, POM (silikɔni nɛgɛ min bɛ funteni caman bɔ, 0,18-0,25mm); 300-400°C ye PEEK, LCP, PPS ye bolibaga funtenimanw kɛrɛfɛ (nɛgɛmakɛminɛn bɛ dɛsɛ; aw bɛ PTFE fini walima PFA filimu kɛ ni nɔrɔli tɛ min na). Sugandili min sinsinnen bɛ fɛnw kan : fɛn nɔrɔlenw mago bɛ PTFE saniyalenw yɔrɔw la minnu bɛ bɔ kosɛbɛ; gilasi/minɛriw falenfɛnw bɛ 0,25mm+ kaseti gɛlɛnw de wajibiya min bɛ se ka sɛgɛn; farafinfura minnu bɛ sɔgɔsɔgɔ, olu bɛ nɔrɔli ni substrat dense de wajibiya min bɛ se ka kemikaliya kɛlɛ; baarakɛcogo minnu bɛ se ka kɛ statiki ye, olu mago bɛ PTFE kaseti nɛrɛma anti-statique la.