PTFE avɔ si me dzoxɔxɔ le ŋutɔ ( PTFE-coated fiberglass ) ɖe dzoxɔxɔ si te ŋu nɔa te ɖe dzoxɔxɔ nu, meléna ɖe nu ŋu o, kple atike siwo mewɔa dɔ o ta. Wonya Gake ɣeyiɣi didi kae wòxɔna ŋutɔŋutɔ? Ŋuɖoɖoa mele bɔbɔe o – etoa vovo tso ɣleti ʋee aɖewo va ɖo ƒe geɖe, le dɔwɔwɔ ƒe nɔnɔmewo kple alesi woléa be nɛ nyuie dzi bliboe.
Aokai PTFE na PTFE avɔ hena dɔwɔwɔ manyaxlẽwo. Le ete la, míeɖe nusiwo katã kpɔa ŋusẽ ɖe agbe dzi le nɔnɔme ɖesiaɖe me la me, emegbe míena agbenɔƒe ƒe mɔkpɔkpɔ ŋutɔŋutɔwo na dɔwɔwɔ ade siwo bɔ – tso nuɖuɖu ɖaɖa dzi va ɖo atike siwo tsia dzoxɔxɔ nu dzi.
Hafi nàlé ŋku ɖe dɔwɔwɔ tɔxɛwo ŋu la, se xexeame katã ƒe nusiwo nana PTFE avɔ ƒe agbenɔƒe nɔa kpuie alo didinɛ ɖe edzi la gɔme.
1. Dzoxɔxɔ dzi ɖuɖu le vevie ŋutɔ
Dzoxɔxɔ si le dɔwɔwɔ me ɣeyiɣi didi enye -70°C va ɖo 260°C . Woate ŋu azɔ mɔ kpui aɖe ayi dzoxɔxɔ si nye 350°C, gake dzoxɔxɔ si gbɔ eme ɣeyiɣi didi gblẽa nu le nusiwo wotsɔ wɔe ŋu eye wònaa agbenɔƒe nɔa kpuie ŋutɔ.
Dodokpɔ ŋuti nyatakakawo: Nusi wotsɔ wɔe la léa dɔwɔwɔ me ɖe asi le esi wotsɔe ɖa atraɖii le dzoxɔxɔ 250°C me ŋkeke 200 megbe.
Se si woatsɔ awɔ dɔe: Le 10°C ɖesiaɖe si wu 260°C gome la, eƒe gbegblẽ dzina ɖe edzi zi gbɔ zi eve teti. Na seɖoƒe nanɔ asiwò.
2. Ƒo asa na ŋutilã me nugbegblẽ – ɖaƒoƒo ɖaɖɛwoe nye futɔ
Xɔ mɔ na ʋuʋudedi ɖaɖɛwo le eɖoɖo kple dɔwɔwɔ me. Creases wɔa stress concentration points eye ateŋu ahe vuvu vɛ bɔbɔe – vevietɔ ne wozãe abe conveyor belts ene. Ne fli si wotsɔ ƒo ƒui nya do ko la, fiberglass-nu si wotsɔ wɔe la gbãna le ete, eye nusi wotsɔ blae la gbãna.
3. Atikewo ƒe agbɔsɔsɔ kple ɖiƒoƒo
PTFE te ŋu nɔa te ɖe acid kple alkali sesẽwo nu nyuie ŋutɔ. Gake ne ami ƒe ɖiƒoƒo, nusiwo wotsɔna léa nu dzodzoe, alo amadede siwo wotsɔna ƒoa nu ɖe nu ŋu ɣeyiɣi didi le dzoxɔxɔ gã me ate ŋu ana nusiwo wotsɔ blae la natsi kabakaba. Togbɔ be PTFE mewɔa dɔ o hã la, nusiwo susɔ ate ŋu awɔ carbon le eƒe gowo dzi eye woagblẽ nusiwo woɖena ɖe go ƒe nɔnɔmewo me.
4. Mɔ̃ɖaŋununya ƒe vuvu ƒe tsitretsitsi
Ʋuʋudedi kple teteɖeanyi atraɖii gblẽa nusi wotsɔ blae la ɖe edzi. Na avɔa nate ɖa tso nu ɖaɖɛwo gbɔ. Le sliding dɔwɔwɔwo gome la, bu PTFE ƒe dzesi siwo yɔ fũ alo amisisi edziedzi ŋu.
5. Woalé ŋku ɖe wo ŋu edziedzi ahaɖɔ wo ɖo
Wɔ beléle na xɔa kple ŋkuléle ɖe eŋu edziedzi ɣleti etɔ̃ ɖesiaɖe be wòawɔ dɔ nyuie. Le nu vevi siwo wowɔna gome la, dzra nusiwo woatsɔ awɔ dɔe ɖo be woazãe ɖe wo nɔewo yome. Ne wokpɔ eƒe vuvu kaba la, esia xea mɔ na kpododonu si gblẽa nu le ame ŋu vevie.
Subɔsubɔdɔ ƒe Agbenɔƒe Tsɔtsɔ Sɔ Kple Wo Nɔewo Na Dɔwɔwɔ ƒe Nɔnɔme Ade Siwo Trɔna
Tabla si gbɔna la ƒo nu tso subɔsubɔ ƒe agbenɔƒe si wokpɔ mɔ na ŋu kpuie si wotu ɖe xexeame ŋutɔŋutɔ ƒe gbeadzinyatakaka siwo tso Aokai PTFE ƒe asisiwo gbɔ dzi.
Dɔwɔwɔ ƒe Nɔnɔme
Dɔwɔwɔ ƒe Nɔnɔmewo & Nuteɖeamedzi
Subɔsubɔdɔ si Wokpɔ Mɔ Na
Nuɖuɖu Aɖaɖa
Dzoxɔxɔ ≤260°C; ami ƒe tsɔtsɔ ɖe ame ŋu; nyuitɔ kekeake si meléna ɖe nu ŋu o, si ŋu kɔklɔ le bɔbɔe
Didi – Static applications (baking trays) nɔa anyi ɣleti geɖe eye womegblẽa nu le wo ŋu kloe o
Tia eƒe titrime, lãgbalẽ, kple nusi nàtsɔ atsyɔ nu dzi si sɔ na wò dɔ tɔxɛa wɔwɔ. Le dɔwɔwɔ siwo me wodoa awu le ŋutɔ gome la, tia PTFE ƒe dzesi si me wode nuɖuɖui alo avɔ si le kpekpem wu. Ne èdi be yeakpɔ atikewo la, kpɔ egbɔ be yede tsii bliboe eye do aɖeke mele eme o.
2. Eɖoɖo ɖe ɖoɖo nu
Ƒo asa na teteɖeanyi si gbɔ eme ne èle mɔ̃ siwo tsɔa nu yia teƒe bubuwo dem.
Tsɔ silicone sealant xe goawo nu na nuto siwo me tsi ate ŋu anɔ bɔbɔe.
3. Beléle na wo edziedzi
Klɔ avɔa ŋu edziedzi be avɔa nagaƒo ƒu o.
Na avɔa nanɔ gbadzaa eye fli aɖeke naganɔ eŋu ne wole dɔ wɔm o.
Le nuɖuɖu siwo me ami sɔ gbɔ ɖo zazã gome la, ɖe dzoxɔxɔ dzi kpɔtɔ 10-20°C.
4. Eɖɔli le ɣeyiɣi nyuitɔ dzi – nya nuxlɔ̃amedzesiwo
Trɔ avɔa enumake ne ède dzesii be:
Amadede ƒe tɔtrɔ vevie (amadede ɣi, blɔ, yibɔ) .
Avɔ ƒe gbagbã (avɔ ƒe gbagbã ne wobɔbɔe) .
Coating blistering alo teƒe gã aɖe ƒe ʋuʋu
Nugbɔ ƒe vuvu alo do siwo wokpɔna
Mègalala ɣeyiɣi si woɖo be woatsɔ aɖɔlie ne dzesi siawo dze o. Avɔ si gblẽ ate ŋu aƒo ɖi nusiwo wowɔ alo agblẽ nu le dɔwɔnuwo ŋu.
Kpuie ko la – Agbenɔƒe ƒe Mɔkpɔkpɔ le Kplɔ̃ɖoɖo Me
Mᴐbibia
Agbe si Wokpɔ Mɔ Na
Dodokpɔ ƒe Nɔnɔme Gbãtɔ
Nuɖuɖu ɖaɖa
Ɣletiwo (si nɔa teƒe ɖeka) .
Ami ƒe carbonization
Dɔwɔƒewo ƒe mɔ̃ si tsɔa nu yia teƒe bubuwo
Ɣleti 6-18
Dodo kple nugbɔ gbagbã
Dzoxɔxɔ ƒe nutrenu
Didi (kple beléle) .
Coating peeling
Atike siwo tsia dzodzodzoetsitsi nu
Ƒe 3+ (4x rababa) .
Atikewo ƒe amedzidzedze (si mebɔ o) .
PV ƒe lamination
Ɣleti 6-12
EVA ƒe nugbagbevi susɔe, dzoxɔxɔ ƒe tsatsam
Ʋuʋudedi sesẽ
Kwasiɖawo va ɖo ɣletiwo
Abrasion ƒe vuvu-to
Nu mamlɛtɔ si woatsɔ ayi: PTFE avɔ si me dzoxɔxɔ le ŋutɔ nye nusi wɔa dɔ nyuie, gake eƒe agbenɔƒe ŋutɔŋutɔ nɔ te ɖe alesi wozãnɛ dzi vevie. Dzoxɔxɔ dzi ɖuɖu sesĩe (nɔ ≤260°C), ƒo asa na ʋuʋudedi ɖaɖɛwo, kɔ eŋu edziedzi, eye nàɖɔlii ne èkpɔ dzesi gbãtɔ be ʋuʋudedi alo ɣie le eŋu. Le dɔwɔwɔ sesẽwo abe atike siwo tsia xɔxlɔ̃ nu ene gome la, PTFE avɔ ate ŋu anɔ anyi didi wu nusiwo wozãna tsã ƒe geɖe.
