Afisi Wozãa Anti-Static PTFE High-Temperature Fabric Le – Agble Vevi 7

Standard PTFE avɔ nye nu nyui aɖe si meléna ɖe nu ŋu o, si te ŋu nɔa te ɖe dzoxɔxɔ nu, gake enye elektrikŋusẽ ƒe nusi xea mɔ na dzoxɔxɔ. Le elektrɔnikmɔ̃wo ƒe kaƒomɔ̃wo me la, dzobibi ate ŋu agblẽ nu le akpa siwo te ŋu nɔa teƒe ɖeka ŋu. Le teƒe siwo bɔmb le (gas, ke) la, tsi si dona le teƒe ɖeka ate ŋu atɔ dzo dzo.

Egbɔkpɔnuae nye be anti-static PTFE avɔ si me dzoxɔxɔ le ŋutɔ . Eléa PTFE ƒe viɖewo katã me ɖe asi – 260°C dzoxɔxɔ ƒe tsitretsitsi, non-stick, atike ƒe dɔmawɔmawɔ – esime wòtsɔa anyigba ƒe ʋuʋu si dzi wokpɔna kpena ɖe eŋu (zi geɖe la, 106–109 Ω anyigba ƒe tsitretsitsi).

Aokai PTFE wɔa avɔ si tsi tre ɖe static PTFE ŋu le hatsotso vovovowo me. Mɔfiame sia ƒo nu tso dɔwɔwɔ ƒe akpa vevi adre siwo me takpɔkpɔ si meʋãna o le vevie ŋutɔ ŋu.

Elektrɔnik & Dɔwɔƒewo ƒe Adzɔnuwo – Takpɔkpɔ Sensitive Components

Le elektrɔnikmɔ̃wo wɔwɔ me la, static discharge nye nusi wua ame le ɖoɖoezizi me. Dzoxɔxɔ ɖeka ate ŋu agblẽ microprocessor alo memory chip.

1. PCB lamination kple dzoxɔxɔ gã babla

Wozãa avɔ si tsi tre ɖe PTFE si meʋãna o ŋu abe asiɖeɖe le nu ŋu ƒe ƒuƒoƒo kple nusi xea mɔ na dzoxɔxɔ ƒe agbalẽ ene le nutomeyimɔ̃ siwo wota (PCB) ƒe lamination me. Dzoxɔxɔ gã (si ade 260°C) menye nya o, eye static-dissipative property xea mɔ na charge ƒe dzidziɖedzi si ate ŋu agblẽ nu le nutome suewo ŋu.

2. Anti-static dɔwɔwɔ teƒewo kple nubablawo

• Dɔwɔnuwo takpɔkpɔ le nuto siwo me dzo ate ŋu atɔ dzo le eye woate ŋu awó me (le kpɔɖeŋu me, ka siwo wotsɔ blaa nu siwo wotu ɖe atike si wotsɔna tsia nu dzi) .

• ESD-safe packaging for static-sensitive components – woateŋu azã avɔa abe nusi wotsɔ blaa nu alo nusi wotsɔ blaa nu ene

• Workbench mats for electronics assembly (togbɔ be rababa mats siwo le kpekpem wu bɔ wu hã la, wozãa PTFE avɔ le afisi dzoxɔxɔ kple non-stick hã hiã le)

Nuɖuɖu & Atikewɔƒe – ESD-Dedie Dɔwɔna

Zi geɖe la, nuɖuɖu kple atikewo ŋuti dɔwɔwɔ bia be woatsɔ aŋe, aŋe, alo ke siwo ate ŋu axɔ dzo (sukli, wɔ, starch) aʋuʋu. Nusiwo meʋãna o ate ŋu ana ke nawó alo ana aŋɔwo nalé ɖe dɔwɔnuwo ŋu.

1. Abolo ɖaɖa kple nuɖuɖu ŋuti dɔwɔwɔ

Wowɔa PTFE avɔ si tsia tre ɖe teƒe ɖeka ŋu wòzua abolomegbawo, microwave gaskets, kple conveyor belts . Nusiwo meléna ɖe nu ŋu o la ɖea amɔwɔ kple abolo siwo woɖa la ɖe go bɔbɔe; nusi tsi tre ɖe wɔ ƒe ke ŋu xea mɔ na wɔ ƒe ke be wòagalé ɖe alidziblanu alo nusi wotsɔ blae ŋu o.

2. Atikewo ƒe bablawo

Le ka siwo me dɔlékui mele o siwo wotsɔ blaa nu me la, static charge ate ŋu ahe ɖinuwo alo ana be blister packs naɖu nu nyuie o. Anti-static PTFE tape si le sealing bars kple conveyor guides dzi kpɔa esia gbɔ, esime menye aɖi o eye wòte ŋu nɔa te ɖe dzoxɔxɔ nu.

Photovoltaics & New Energy – Ɣe ƒe Lãmenugbagbeviwo Takpɔkpɔ

PV module wɔwɔ koŋue tsia dzi ɖe elektrikŋusẽ si meʋãna o ŋu. Ɣe ƒe lãmenugbagbeviwo le sue, wogbãna, eye ESD gblẽa nu le wo ŋu bɔbɔe.

1. PV module lamination

Le ɣe ƒe ŋusẽ ƒe mɔ̃wo (150°C, nyaƒoɖeamenu gã, EVA encapsulant si wofa) lamination me la, avɔ si tsi tre ɖe PTFE ŋu si tsia tre ɖe teƒe ɖeka ŋu la wɔa dɔ abe:

• Avɔ si ma lãmenugbagbeviawo kple laminator diaphragm dome

• Conveyor belt na lãmenugbagbeviwo ƒe dɔwɔwɔ hafi lamination

Nɔnɔme si tsi tre ɖe teƒe ɖeka ŋu xea mɔ na charge ƒe ƒuƒoƒo si ate ŋu ana micro-cracks le silicon cells me alo ahe ke si ahe vɔvɔli ƒe nɔnɔme madeamedziwo vɛ.

Aokai PTFE naa anti-static PTFE avɔ koŋ na PV laminators. Woda asi ɖe edzi le dɔwɔnu xɔŋkɔwo ƒe ŋkɔwo dzi eye woate ŋu akpɔe le seamless belt nɔnɔme me.

Chemical & Environmental Protection – Nusiwo ate ŋu axɔ dzo ƒe dɔwɔwɔ dedie

Zi geɖe la, atikewɔƒewo, amiɖaƒewo, kple gbeɖuɖɔɖɔƒewo kpɔa ya siwo ate ŋu axɔ dzo, yaƒoƒo, alo ke siwo ate ŋu atɔ dzo la gbɔ. Dzoxɔxɔ ɖesiaɖe si meʋãna o ate ŋu anye afɔku gã aɖe.

1. Anti-corrosion pɔmpi babla

Wozãa PTFE avɔ abe nusi wotsɔ blaa atikewo ƒe pɔmpiwo, ʋuƒo, kple tsi siwo wotsɔna wɔa dɔe ene. Anti-static grade la kpɔa egbɔ be static charge meƒoa ƒu ɖe lining ƒe anyigba dzi o – ele vevie ŋutɔ ne wole tsi siwo menye conductive o pɔmpim.

2. Ga gbegblẽwo ŋuti dɔwɔwɔ (le kpɔɖeŋu me, desulfurization) .

Le elektrikdɔwɔƒewo ƒe sulfur ɖeɖeɖa ƒe ɖoɖowo me la, PTFE avɔ nyea kekeɖenudɔ siwo mexɔa dzo o kple duct liners . Anti-static version la xea mɔ na charge ƒe ƒuƒoƒo tso gas ƒe sisi me (triboelectric effect).

Awu & Awu Dɔwɔƒe – Ðeɖe Static Cling dzi kpɔtɔ

Avɔwo ŋuti dɔwɔwɔ bia be woaʋuʋu avɔwo kple ka siwo naa dzoxɔxɔ si nɔa anyi ɖaa. Dzoxɔxɔ ma nana kaawo léna ɖe agbalẽ xatsaxatsawo ŋu, ena be web mewɔa ɖeka o, eye ate ŋu ana dzobibiwo gɔ̃ hã nado.

1. Ewɔwɔ ƒe mɔ̃ siwo wotsɔna tsɔa nu

Wozãa avɔ si tsi tre ɖe PTFE si meʋãna o abe mɔ̃ siwo wotsɔna tsɔa dzoxɔxɔnamɔ̃wo kple mɔ̃ siwo wotsɔna ƒua gbe (200-260°C) ene. Eɖea avɔ siwo ŋu wowɔ atike ɖo la ɖe go dzadzɛ eye wòkaka ɖe teƒe ɖeka be woagalé ɖe wo nɔewo ŋu o.

2. Dzoxɔxɔ ƒe tsɔtsɔ yi teƒe bubu ƒe agbalẽtamɔ̃ avɔ

Le agbalẽtamɔ̃ siwo wotsɔna yia teƒe bubuwo gome la, avɔ si nye PTFE si meʋãna o ye nyea agbalẽtamɔ̃ . Exea mɔ na nuŋlɔtsi ƒe tɔtrɔ yi agbalẽtamɔ̃a me eye wòɖea ʋuʋudedi siwo nɔa teƒe ɖeka na dɔwɔlawo ɖa.

Xɔtuɖaŋu & Nubablɛwo – Dzadzɛ Nutrenuwo, Dedie Dɔwɔnawo

1. Packaging dɔwɔƒe – dzoxɔxɔ nutrenu blades

Le akplowɔmɔ̃ siwo zɔna kabakaba me la, PTFE-ka si tsia tre ɖe teƒe ɖeka ŋu si woda ɖe nutrenu ƒe asikewo dzi xea mɔ na plastik film be wòagalé ɖe nu ŋu o. Anti-static property hã xea mɔ na charge ƒe ƒoƒo ɖe film la dzi, si ate ŋu ana mis-feed alo operator nawɔ nuku.

2. Agbalẽtata dɔwɔƒe – UV dɔyɔyɔ kple laminating conveyors

PTFE avɔ ƒe alidziblanu siwo tsia tre ɖe teƒe ɖeka ŋu le UV-dɔdamɔnu kple laminators dzi naa nusiwo wota la nɔa gbadzaa eye womete ŋu nɔa teƒe ɖeka o, si xea mɔ na nuɖuɖu zi eve kple ke ƒe hehe.

3. Xɔtuɖaŋu ƒe membrane nuwo

Le bɔlƒoƒea tame gãwo kple xɔtuɖaŋu siwo me ʋuʋudedi le gome la, wogblɔa PTFE xɔtuɖaŋu ƒe lãkusi ɣeaɖewoɣi kple nusiwo tsia tre ɖe teƒe ɖeka ŋu be wòaxe mɔ na dzikedzo ƒe nuhehe (togbɔ be wogazãa dzikedzowo kokoko hã) eye wòaɖe ke ƒe ƒoƒo ɖe lãkusia ƒe anyime dzi akpɔtɔ.

Dɔwɔƒe Bubuwo – Dɔwɔwɔ Tɔxɛwo

1. Dɔwɔnu siwo wotsɔna ƒoa aŋɔe

Anti-static PTFE avɔ subɔna abe asiɖeɖe le avɔ le grinding wheel curing . Nusiwo tsia tre ɖe teƒe ɖeka ŋu xea mɔ na ke si le ʋuʋum be wòagalé ɖe agbalẽ si woɖena le eme ŋu o.

2. Plastik-ʋuʋudedi

Wozãnɛ abe nusi ɖea wo ɖokui ɖe aga ene be woatsɔ axe mɔ na plastik si wofa be wòagalé ɖe ta siwo wotsɔa ga ƒoa nui ŋu o. Anti-static xea mɔ na ke ƒe hehe le welding nɔnɔme dzadzɛwo me.

3. Yamenutome kple yamenutomeyimɔ̃ siwo ƒe dzoxɔxɔ deŋgɔ

• Yamenutome ƒe akpa siwo me wòhiã be woakaka ɖe teƒe ɖeka hena dedienɔnɔ

• Base material na high-frequency akɔbli clad laminates – PTFE ƒe low dielectric constant kpe ɖe anti-static na radar dɔwɔwɔ aɖewo

• Kekeɖenudɔ siwo te ŋu trɔna bɔbɔe le mɔ̃memi ƒe ɖoɖowo me afisiwo static buildup nye afɔku le

Kpuie ko la – Ɣekaɣie Nàtia Anti-Static PTFE Fabric

Aokai PTFE naa anti-static PTFE avɔ le custom kekeme, titrime (0.08mm va ɖo 0.40mm), kple anyigba dzi tsitretsitsi dometsotsowo. Taɖodzinu si woɖo ɖie nye 106–109 Ω; ƒomevi bubu siwo li ne wobia.

Le ESD-sensitive dɔwɔwɔ akpa gãtɔ gome la, anti-static grade le vevie ŋutɔ. Le zazã bliboa me le afisiwo static menye nusi ŋu wotsi dzi ɖo o la, PTFE avɔ si wozãna ɖaa sɔ gbɔ – gake ne mèka ɖe edzi o la, te ɖe mía ŋu hena mɔfiame.

Nya siwo le etame la tso Jiangsu Aokai Nu Yeyewo Mɔ̃ɖaŋununya Co., Ltd.

Míetsɔa adzɔnuwo ƒe hatsotso blibo si me PTFE dzoxɔxɔ gã avɔwo, PTFE dzoxɔxɔ gã tapes, PTFE mesh alidziblanu, seamless alidziblanu na bonding mɔ̃wo, axa ɖeka PTFE avɔwo, dzoxɔxɔ gã tsi tre ɖe conveyor belts kple fiberglass avɔwo. Miate ŋu aƒo ka na mí faa hena adzɔnuwo ŋuti nyatakaka tsitotsito, dɔwɔwɔ ŋuti mɔfiamewo kple egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu.

Kadodo Ŋuti Nyatakakawo

• Aƒetɔ Guo: +86 18944819998

• Aƒetɔ Liu: +86 13705266308

Míewɔna ɖe dɔwɔwɔ nyuie kple fɔmaɖimaɖi ƒe gɔmeɖosewo dzi, eye míeɖoe kplikpaa be míana egbɔkpɔnuwo le teƒe ɖeka kple subɔsubɔdɔ siwo ŋu wobu nyuie na asisiwo katã.