Tef ɗin PTFE A Matsayin Sakin Layer a cikin Gyaran Latsa Zafin FRP

Ra'ayoyi: 0 Mawallafi: Lokacin Buga Editan Yanar Gizo: 2026-05-08 Asalin: Shafin

Jiangsu Aokai Sabbin Materials, tushen masana'anta na PTFE babban tef ɗin mannewa, yana ba ku gabatarwar ƙwararru. A cikin zafin latsa waraka na Fiberglass Reinforced Filastik (FRP), PTFE babban manne tef yana aiki azaman kyakkyawan Layer saki. Godiya ga ƙwararren ƙwararren ƙwararren ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun sabis tare da ingantaccen kulawa, ya zama babban mafita a cikin masana'antar.

Ya kamata a lura cewa lokutan sake amfani da tef ɗin suna da alaƙa da nau'in samfurin, sigogin tsari da kiyayewa na yau da kullun.

Babban tsarin rushewar sa yana cikin ƙaramin ƙarfi na saman rufin PTFE (kimanin 18mN/m kawai), wanda ke sa ya yi wahala ga narkakkar guduro don jika saman lamba. Ainihin lokutan sake amfani da su a aikace-aikacen aikace-aikacen sun dogara ne akan abubuwa masu zuwa:

Factor Factor Tasiri	Maɓallin Sarrafa Maɓalli & Shawarwari
Kula da Zazzabi	Ci gaba da yawan zafin jiki na tef ɗin ba zai wuce 260 ° C (zazzabi na gajeren lokaci ba zai wuce 300 ° C ba). Yin aiki na dogon lokaci a matsanancin zafin jiki zai haɓaka tsufa da lalacewa na PTFE.
Matsawa & Damuwar Injini	Ɗauki samfurin tef tare da ƙaramin zane mai ƙarfi na fiberglass mai ƙarfi da juriya mai tsagewa, wanda zai iya jure wa babban matsi da ƙarfi yadda ya kamata yayin buɗe ƙirar ƙira da rufewa, guje wa ɓarna da wuri wanda lalacewa ta tef ya haifar.
Daidaituwar sinadarai	PTFE kanta yana da kyakkyawan kwanciyar hankali na sinadarai, yayin da maɓalli ya ta'allaka ne a cikin zaɓin m. Don saduwa da dogon lokaci tare da ƙaƙƙarfan acid, alkali ko abubuwan kaushi, adhesives tare da ingantacciyar juriyar sinadarai kamar silicone ko manne mai rurrufi dole ne a zaɓi don hana bawon da ya haifar da gazawar mannewa.
Tsaftacewa & Kulawa	Bayan kowane rushewa, da sauri cire ragowar resin tarkace da gurɓataccen abu a saman tare da abubuwan da ba su lalacewa kamar barasa. Tsaftataccen wuri shine mabuɗin don kiyaye kadarorin sa mara sanda.

Dangane da abubuwan da ke sama, ƙididdigar rayuwar sabis a ƙarƙashin yanayin aiki daban-daban shine kamar haka:

· Matsanancin Yanayin Aiki (Zazzabi ：200C, babban matsin lamba, yawan amfani): 10 ~ 200 sau

Yanayin Aiki na al'ada (Matsakaicin zafin jiki, matsa lamba mai ƙarfi, kulawa da hankali): 200 ~ 500 sau

Yanayin Aiki Madaidaici /Maɗaukaki (Ƙarancin matsa lamba, zazzabi [150°C, amfani na ɗan lokaci): Fiye da sau 500

Don cimma mafi girman ƙimar sake amfani da tef ɗin manne mai zafi mai zafi na PTFE, bari tef ɗin ya tsaya har tsawon sa'o'i 24 bayan liƙa, kuma yayi rikodin ainihin lokutan sabis ɗin sa. Ana ba da shawarar maye gurbin tef ɗin lokacin da ya kai 80% na rayuwar sabis ɗin da ake tsammani.

ne ya samar da bayanan da ke sama. Jiangsu Aokai New Materials Technology Co., Ltd

Idan kana son samun zurfin fahimta game da cikakkun sigogi, yanayin aikace-aikacen da keɓaɓɓun mafita don cikakkun samfuran samfuranmu ciki har da PTFE high-zazzabi zane, PTFE high-zazzabi m tef, PTFE high-zazzabi raga bel, sumul fusing inji bel, guda-gefe PTFE mai rufi da kuma high-resistant fibertempera bel ɗin, high-resistant fibertempera. tufafi, da fatan za a tuntube mu ta hanyoyi masu zuwa:

· Layin Sabis: Mr. Guo: +86 18944819998 Malam Liu: +86 13705266308

Kullum muna bin falsafar sabis na ƙwararru da mutunci, kuma da zuciya ɗaya muna ba ku mafita ta tsayawa ɗaya da sabis na kulawa!

Tef ɗin PTFE A Matsayin Sakin Layer a cikin Gyaran Latsa Zafin FRP

Labarai masu alaka

Shawarwar samfur

SAUKAR HANYA

KASHIN SAURARA