Pehea ka pili ana o Fiberglass Warp & Weft Density i ka PTFE High-Weft Cloth Properties

Ke koho ʻO ka lole wela kiʻekiʻe PTFE , ka hapa nui o nā mea kūʻai aku e nānā i ka mānoanoa a me ka maikaʻi o ka uhi. Akā, ua hūnā ʻia ma lalo o ka papa PTFE kahi ʻāpana koʻikoʻi: ʻo ke ʻano o ka weft a me ka weft o ka substrate fiberglass.

Hōʻike ka Density i ka paʻa ʻana o nā wili. Hoʻopili ia i nā mea a pau - ka ikaika tensile, ka pale ʻana i ka waimaka, ka hoʻopili ʻana i ka uhi, ka maʻalahi, a me ka maʻalahi o ka ʻili. Paʻa loa, a ʻoʻoleʻa ka lole me ka ikaika ʻole o ka waimaka. ʻAʻole ʻae, a ʻike ʻia nā pinhole me ke kūpaʻa nāwaliwali.

Ua hoʻonui ʻo Aokai PTFE i nā density fiberglass ma waena o nā tausani o ka holo ʻana. Hōʻike kēia alakaʻi i ka hopena o ka nui o nā waiwai koʻikoʻi a kōkua iā ʻoe e koho i ke kaulike kūpono no kāu noi.

Ka ikaika o ka mīkini a me ka paʻa ʻana

1. Ka Ikaika Tensile

ʻŌlelo hoʻomaʻamaʻa: No nā noi e koi ana i ka ikaika tensile kiʻekiʻe (e laʻa, nā kāʻei conveyor ākea ma lalo o ka haʻalulu kiʻekiʻe), e ʻimi i ka haʻahaʻa haʻahaʻa a kiʻekiʻe. Akā, e pale i ka nui loa, kahi e hoʻonāwaliwali mua ai ma lalo o nā ukana ikaika.

2. Kaha Waimaka – Ka Huli U-Curve

ʻO ka ikaika waimaka ka hōʻailona maʻalahi loa e pili ana i ka paʻa. Ma hope o ka uhi ʻana o ka PTFE, hoʻopaʻa ka resin polymer i nā kaula i ulana ʻia ma kahi. E hahai ana ka pilina i ka pihi U-like hoohuli :

ʻO ka lawe ʻana i nā mea nui: Loaʻa ka ikaika haʻahaʻa haʻahaʻa ma ka haʻahaʻa haʻahaʻa , ʻaʻole kiʻekiʻe loa. Kūʻē pinepine kēia.

Hāʻawi ʻo Aokai PTFE i nā substrate fiberglass me nā densities i kāohi pono ʻia. No nā noi waimaka-koʻikoʻi (e laʻa, nā kāʻei conveyor ma luna o nā mea hoʻokele wili me ka hoʻokuʻu pinepine ʻana), paipai mākou i ka haʻahaʻa haʻahaʻa (maʻamau 18-20 mau hopena/cm) e hoʻonui i ka pale ʻana i ka waimaka.

3. Ana Paʻa a me Anti-Warp Performance

Manaʻo Manaʻo: No nā noi wela kiʻekiʻe e koi ana i ka pololei kikoʻī kikoʻī (e laʻa, nā pahu hoʻopaʻa wela, laminating pads), koho i nā substrate kūlike, haʻahaʻa a kiʻekiʻe.

ʻO ke komo ʻana o ka uhi ʻana, ka hoʻopili ʻana a me ke ʻano o ka ʻili

1. Pahu & Mechanical Anchoring Force

Hoʻokaʻawale: Pono ka haʻahaʻa haʻahaʻa i nā ala uhi hou e hoʻopiha ai i nā meshes hāmama (i ʻole e puka mai nā pinholes). Pono ke kiʻekiʻe kiʻekiʻe i nā ʻāpana hoʻopaʻa ʻia e hōʻoia i ke komo piha ʻana.

2. Ka Smoothness Ili & Non-Stick Performance

3. Kū i ka Voltage & Pinhole Ratio

ʻOi aku ka maikaʻi o ka lole kumu paʻa, ʻoi aku ka nui o nā pores, e koi ana i ka uhi ʻoi aku ka lahilahi no ka loaʻa ʻana o ka ʻili ʻole pinhole - e hōʻoiaʻiʻo ana i ka ikaika dielectric breakdown.

Ka manaʻo o ka noi: No nā noi insulation uila, makemake ʻia ka substrate kiʻekiʻe.

Hiki i ka hikiwawe a me ke kū'ē i ka luhi luhi

ʻO ka hana ʻino no ke kiʻekiʻe kiʻekiʻe ma lalo o ka hoʻololi ʻana: ʻO ka piʻi pinepine ʻana e hoʻoulu ai i ka hakakā a me ka hoʻokuʻu ʻana ma nā wahi keʻa o ke kaula, e alakaʻi ana i ka haki ʻana a me ka haki ʻana o ka lole kumu.

Manaʻo Manaʻo: No nā huahana e hana ana ma lalo o ka hoʻololi mau ʻana i ka wikiwiki (e laʻa, nā kāʻei conveyor ma nā pulley liʻiliʻi, nā sila dynamic), ʻoi aku ka maikaʻi a i ʻole ka haʻahaʻa haʻahaʻa .

Hōʻuluʻulu Manaʻo - Pehea e koho ai i ka Density

Ka lula gula: Mai hahai makapō i ka nui loa. Hiki i ka ʻoi aku ka maikaʻi ke komo i ka PTFE i ka wā e kaulike ana i ka pale ʻana i ka waimaka, ka maʻalahi, a me ka pololei o ka ʻili. No ka nui o nā noi ʻoihana kumu nui, hāʻawi ka ʻano haʻahaʻa haʻahaʻa (18-22 hopena/cm) i ka hana maikaʻi loa a puni.

I ka hōʻuluʻulu manaʻo , ʻo ka weft a me ka weft density o ka lole fiberglass he mea koʻikoʻi akā ʻike pinepine ʻia no ka lole wela kiʻekiʻe PTFE. Hoʻonui ka ʻoi aku ka nui i ka ikaika tensile, ka laulima o ka ʻili, a me ka hana dielectric, akā e hōʻemi i ka ikaika o ka waimaka (ma hope o kahi kiʻekiʻe kiʻekiʻe), hiki ke maʻalahi, a me ke komo ʻana o ka uhi. ʻO ka haʻahaʻa haʻahaʻa e hoʻomaikaʻi i ka maʻalahi, hoʻololi i ke ola luhi, a me ka hoʻopili ʻana i ka uhi ʻana, akā hiki ke waiho i nā pinhole a me ka pau ʻana o ka ʻili.

ʻO ke kaulike ke kī. No nā haʻina waimaka-koʻikoʻi a me ka ikaika, e koho i ka haʻahaʻa haʻahaʻa (18-22 hopena/cm). No ka ultra-smooth non-stick a me ka uila uila, hiki ke ʻae ʻia ke kiʻekiʻe kiʻekiʻe. No ka hoʻopaʻa haʻahaʻa haʻahaʻa a me ka haʻahaʻa ʻoi aku ka maikaʻi.

Pono e kōkua i ke koho ʻana i ka nui fiberglass ʻoi loa no kāu noi lole PTFE? Hāʻawi ʻo Aokai PTFE i nā substrate maʻamau ma waena o kahi ʻano o nā density warp / weft. E hoʻokaʻaʻike mai iā mākou me kāu mau koi hoʻopau mīkini a me ka ʻili.

Hāʻawi ʻia e Jiangsu Aokai New Materials Technology Co., Ltd.

Inā makemake ʻoe i nā kikoʻī kikoʻī, alakaʻi noiʻi, a me nā hoʻonā i hana ʻia no nā huahana piha me ka PTFE kiʻekiʻe-mehana lole, PTFE adhesive tape, PTFE mesh kāʻei, seamless fuser kāʻei, hoʻokahi ʻaoʻao i uhi ʻia i ka lole PTFE a me ke kāʻei conveyor pale wela , e ʻoluʻolu e kelepona i kā mākou loea:

• Mr. Guo: +86 18944819998

• Mr. Liu: +86 13705266308

Hoʻopili mākou i ka ʻoihana a me ka kūpaʻa e hoʻolako i nā mea hoʻoponopono āpau āpau a me nā lawelawe ma hope o ke kūʻai aku.