ʻO ka PTFE kiʻekiʻe-mehana lole (PTFE-coated fiberglass) he mea kānana kānana maikaʻi no nā kūlana koʻikoʻi: ka hoʻohemo ʻana i ka lepo (cement, waste incineration, coal boilers a hiki i 260 ° C), corrosive wai kānana (acids, alkalis, aila), meaʻai / lāʻau hoʻomaʻemaʻe sterile kānana, a me HEPA cleanroom kānana. ʻAʻole hiki ke hoʻomaʻemaʻe maʻalahi ka ʻili non-stick. Loaʻa i nā māka membrane-laminated nā hoʻokuʻu haʻahaʻa loa.

PTFE kiʻekiʻe-mehana lole mālama maikaʻi uila insulation mai -180 ° C a hiki i 260 ° C: volume resistivity>10¹³ Ω·cm ma 200 ° C, dielectric paʻa paʻa ma 2.0-2.1. Ma luna o 260 ° C, PTFE palupalu, decomposes ma luna o 327 ° C, nalowale insulation mau loa. Ma lalo o 0 ° C, hoʻomaikaʻi ka insulation akā lilo ka uhi i palupalu. Noho i loko o 260°C no ka hana pono.

ʻO ka lole wela kiʻekiʻe o ka PTFE (PTFE-coated fiberglass) he mea kūpono ia no nā kāʻei conveyor meaʻai ma muli o kona kūpaʻa wela 260 ° C, -70 ° C hiki ke anuanu, non-stick surface, a me ka FDA compliance. Nā mea nui: nā umu bakena (biscuits, berena, pizza), nā mea lawe meaʻai palai, nā laina hoʻoluʻu candy, nā tunnels maloʻo, nā sila wela, a me ka ʻōwili wili. Hoʻemi i ka pau ʻole a me ka manawa hoʻomaʻemaʻe.

Hoʻohana ʻia nā mea hoʻopau ʻili i ka lole fiberglass ma mua o ka uhi ʻana o ka PTFE he mea koʻikoʻi no ka hana ʻana o ka lole wela kiʻekiʻe PTFE. Hoʻokumu nā mea hoʻopili organosilane i nā alahaka molekala ma waena o ke aniani aniani a me ka PTFE organik, e hoʻonui ana i ka ikaika peel mai <2 N / cm a 4-8 + N / cm. Hoʻonui ka lapaʻau kūpono i ka pale wela (260°C+), ka hana dielectric, a me ke kūpaʻa kemika. ʻO ka lole i mālama ʻole ʻia e alakaʻi i ka delamination, bubbling, a me ke ola lawelawe pōkole.

Hoʻoholo ʻia ka hana lole lole wela kiʻekiʻe o PTFE. Hoʻonui ka mānoanoa kiʻekiʻe i ka ikaika tensile a me ka maʻalahi o ka ʻili akā e hōʻemi i ka ikaika o ka waimaka (hoʻohuli U-curve), ka maʻalahi, a me ke komo ʻana o ka uhi. ʻO ke kaulike maikaʻi loa e hoʻopaʻa i ke komo ʻana, ka pale ʻana i ka waimaka, ka maʻalahi, a me ka pau ʻana o ka ʻili. ʻO ka haʻahaʻa haʻahaʻa kūpono i ka dynamic bending; kiʻekiʻe kiʻekiʻe no ka non-stick a me ka insulation.

Kalendering - kaomi ʻana i ka lole i uhi ʻia i ka PTFE ma waena o nā wili aniani wela ma 360-380 ° C - hoʻololi nui i ka morphology ili, hoʻokuʻu i nā waiwai, impermeability, a me ka hana mechanical. Hoʻemi ia i ka roughness mai Ra 0.5-1.0 μm a i <0.05 μm, hoʻopaʻa i nā pinholes, hoʻomaikaʻi i ka pale ʻana, akā hoʻemi i ka ikaika o ka waimaka a me ka maʻalahi. Pono no ka hoʻokuʻu ʻana i nā liner a me ka hoʻokaʻawale uila.

ʻO ka hiʻohiʻona ulana fiberglass - maʻalahi, twill, a i ʻole satin - pili nui i ka PTFE mau mea wela wela. Hāʻawi ka ulana satin i ka ikaika haʻalulu kiʻekiʻe (2-3x paʻa) a me ka maʻalahi, kūpono no ke kuʻi ikaika. Hāʻawi ka ulana maʻemaʻe i ka paʻa o ka dimensional maikaʻi loa a me ka hoʻopili ʻili, kūpono no nā noi static. Hoʻohālikelike ʻo Twill i nā waiwai āpau no ka hoʻohana maʻamau.

Hoʻoholo ʻia ka like ʻana o ka uhi ʻana o ka lole wela kiʻekiʻe PTFE e nā kumu ʻehā: ka hoʻokumu ʻana o ka uhi (ka nui o ka particle 0.15-0.35 μm, viscosity, solid content), ka uhi ʻana a me ke kaʻina hana sintering (makemake ʻia ka uhi ʻana no ka like ʻole), ka maikaʻi o ka substrate (weave pattern, pre-treatment), a me ke kaiapuni hana (20-25% R, <60). ʻO ke kaʻina hana hoʻohui ʻia ʻo Dip + blade e kaulike i ke komo ʻana a me ka maʻalahi o ka ʻili.

ʻO ka hoʻomaʻemaʻe a me ka mālama pono e hoʻolōʻihi i ke ola o ka lole wela wela PTFE. E hoʻomaʻemaʻe ma hope o ka hoʻohana ʻana a ma hope o ka hoʻoluʻu. E hoʻohana i nā pulupulu palupalu, nā mea hoʻomaʻemaʻe kūʻokoʻa, a i ʻole ka waiʻona no nā ʻili. Mai hoʻohana i nā ʻakika/alkalis ikaika, bleach, a i ʻole nā ​​mea ʻoki metala. ʻO ka lubrication ʻaila silicone maʻamau e hōʻemi i ka ʻaʻahu. E hahai i kēia mau kuhikuhi no ka pale ʻana i ka pōʻino o ka uhi.

Hoʻohana ʻia ka lole kiʻekiʻe PTFE a me ka lole silikoni i ka lole fiberglass ma ke ʻano he kumu akā ʻokoʻa i nā mea uhi (PTFE resin vs silicone rubber). Ua ʻoi aku ka maikaʻi o ka PTFE i ka lāʻau ʻole, ka pale ʻana i ka ʻaʻahu, a me ke kūpaʻa kemika a hiki i 260°C. Hāʻawi ka lole silikoni i ka maʻalahi, ka hoʻokaʻawale uila, a me ke kūpaʻa ahi (a hiki i 230 ° C). E koho ma muli o kāu mea nui.