Aplikeshɔn fɔ PTFE Ay-Tɛmpratura Klɔt insay Ay-Tɛmpratura Filtreshɔn (ɛgz. Indastrial Flu Gas Filtreshɔn): Aw fɔ Balans Ɛya Pɛmiabiliti ɛn Filtreshɔn Prɛsishɔn

Jiangsu Aokai Nyu Matirial – PTFE Ay-Tɛmpratura Klɔt Manufacturer ɛksplen:In industrial ay-tɛmpracha flue gas filtreshɔn aplikeshɔn, PTFE ay-tɛmpracha klos de fes wan kɔr tɛknikal kɔntradikshɔn: fɔ pursyu ekstrim ay filtreshɔn prɛsishɔn bɔku tɛm rizulta in ridyus ɛya permiabiliti, pan ɔl we fɔ prɔyoritɛt ay ay permiabiliti de lid to insufficient intasepshɔn efyushɔn. So, di esens fɔ aplay PTFE ay-tɛmpracha klos de fɔ fɛn wan dinamik balans bitwin ɔpreshɔn rɛsistɛns ɛn ɛmishin standad.

Dis dɔŋ ya na spɛshal balansin mɛzhɔ dɛn we dɛn bays pan di matirial prɔpati dɛn fɔ PTFE ay-tɛmpracha klos:

I. Ki Variables we Afɛkt di Balans Pɛfɔmɛns fɔ PTFE Ay-Tɛmpratura Klɔt

Fɔ mek shɔ se PTFE ay-tɛmpracha klos de wok fayn fayn wan ɔnda harsh wok kɔndishɔn, di 'efyushɔn-rɛsistɛns' rilayshɔn fɔ ajɔst tru di paramita dɛn we de dɔŋ ya:

· . 

Opareshɔn filtreshɔn velositi Na wan lɔw filtreshɔn velositi (ɛgz., <0.8 m/min), PTFE ay-tɛmpracha klos de ajɔst wan ay intasepshɔn prɔbabiliti fɔ fayn dɔst patikyula dɛn ɛn i de mentɛn wan mɔ stebul prɛshɔn difrɛns akɔdin to di matirial. Dis de alaw di klos fɔ deliv ay prɛsishɔn wit lɔw ɔpreshɔn ɛnaji kɔnsɔmshɔn.

· . 

· . 

Bes fabrik wet (g/m²) Di wet de ditarmin di strɔkchɔral kɔmpaktnɛs fɔ PTFE ay-tɛmpracha klos dairekt wan. hεy-weyt klot (abov 800 g/m²) fכm dεn fayba akyumyuleshכn, we de delivεr εksepshכnal filtrεshכn prεsishכn (up to 0.3 μm), bכt i nid rεstrikt εya fכ fכlכ we dεn de aplikεshכn. Klot we nɔ gɛt bɔku wet de prɔyoritɛt di kɔst-ɛfɛktiv we di briz kin pas.

· . 

· . 

Filtreshɔn prɛsishɔn rikwaymɛnt Stricta ɛmishin standad dɛn de aks fɔ ay intasepshɔn efyushɔn (ɛgz., >99.99%). insay dis kayn kes dεm, strכkchכral modifyushכn nid fכ kכmpεns fכ pεrmiabiliti lכs we kכz bay inkrεs kompakt.

· . 

II. Teknik Prɔses fɔ Optimayz di Balɛns fɔ PTFE Ay-Tɛmpratura Klɔt

Fɔ ajɔst ɔl tu di ay prɛsishɔn ɛn ay ay permiabiliti, industrial manifakta dɛn de yuz advans modifyeshɔn tɛnkɔlɔji dɛn to PTFE ay-tɛmpracha klos:

· . 

Surface membrane lamination technology Dis na di men prɔses fɔ ay-ɛnd filtreshɔn aplikeshɔn dɛn. wan maykroporous PTFE mεmbran de tεmכl laminεt pan di PTFE bays fכbrik, we de mek i ebul fכ filta di sכfayz . dכst nכmכ de adhe to di sכfa εn i izi fכ pul am via puls klin, we de kip di intanεt por dεm we nכ de ambɔg.Tru biaxial strεch, di mεmbran ay pεrmiabiliti kin pas 220 L/dm²·min, we de ridyus rεsistεns bay 40% we yu kכmpεr wit kכvεshכnal prodakt dεm.

· . 

· . 

Gradient strɔkchɔ dizayn PTFE ay-tɛmpracha klos bɔku tɛm de adopt wan mɔlti-layer kɔmpɔzit strɔkchɔ:

· . 

o di layεr we de fεs di dכst de yuz כltra-fayn fayv dεm fכ εnhans filtrεshכn prεsishכn;

o di insay layεr de yuz kכs fayb dεm fכ fכm lכw rεsistεns εya chεnal dεm.A ay porositi rεt (>85%) de mek sכh se di ay difyushכn smol smol insay di mεtirial.

· . 

Fayba blɛndin & wev ɔptimayzeshɔn Glas fayba ɔ P84 fayba na blɛnd fɔ impɔtant dimɛnshɔnal stebiliti ɛn savis layf. spεshal wef dεm lεk fכ-hans satin  de ridyus di εyafכlכ obstrכkshכn na intalaysin pכynt dεm, we de gi wan smol bays fכ mεmbran laminεshכn εn prεvεnt mεmbran damej we go kכmprכmis filtrεshכn prεsishכn.

· . 

III. Rifrɛns Indikɛtɔ fɔ Balans PTFE Ay-Tɛmpratura Klɔt

Insay prɛktikal injinɛri sɛlɛkshɔn, balans PTFE ay-tɛmpracha klos filta bag dɛn tipikli fɔdɔm insay di rɛnj dɛn we de dɔŋ ya, we de difrɛns aplikeshɔn fɔ kɔvɛnshɔnal ɔ ɔlta-lɔ ɛmishin rikwaymɛnt dɛn:

· Weyt: 300–800 g/m²

· Nominal filtreshɔn prɛsishɔn: 0.1–10 μm

· Initial rεsistεns: ≤150 Pa

· Opareshɔn totɛl rɛsistɛns: ≤1200 Pa (fɔ sev indyuz draft fan pawa kɔnsɔmshɔn)

· Eya permeabiliti fɔ ay kwaliti laminated PTFE klos: 3–15 m³/m²·min

IV. Aplikeshɔn Lɔjik Sɔma

Di balans bitwin di ay permiabiliti ɛn filtreshɔn prɛsishɔn fɔ PTFE ay-tɛmpracha klos nɔto bay wan matirial paramita, bɔt bay sistamɛtik manejmɛnt ɔlsay na in ɔl savis life.By optimizing filtration velositi, membran lamination teknoloji, ɛn gradient strɔkchɔ, PTFE ay-tɛmpracha klos kin intasept sabmaykron patikyula dɛn we i de mentɛn ɔpreshɔn prɛshɔn drɔp insay wan ɛnaji-efishin rɛnj.

Wit di advansmɛnt fɔ nanofayba kɔtin teknɔlɔji, PTFE ay-tɛmpracha klos go ajɔst ay filtreshɔn prɛsishɔn pan lɔwa rɛsistɛns, fɔ kɔnsolidɛt in kɔr pozishɔn mɔ insay ay-tɛmpracha flu gas purifyeshɔn.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl paramita, aplikeshɔn sɛnɛriɔ, ɛn kɔstɔmayz sɔlvishɔn fɔ di ful prodak rɛnj — inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt, ay-tɛmpracha fayvglas klot, ɛn ɔda tin dɛn —. duya kɔntakt wi:

· Savis Hotlayn:Mista. Guo: 18944819998 Mista Liu: 13705266308 Di wan dɛn we de wok fɔ di kɔmni