Fכnshכn dεm fכ Tikεn dεm na PTFE Emulshכn – 4 Ki Rol dεm

Na di prodakshɔn fɔ PTFE high-temperature fabric , di impregnation step de yuz wan PTFE emulshɔn (akyu dispershɔn). Bɔt raw PTFE ɛmulshɔn nɔmɔ at fɔ prosɛs fayn fayn wan. dεn ad tikna dεm fכ modify in rεolojikal bihayv εn stεbiliti.

Wetin du? PTFE resin gɛt ay density ɛn i kin lɛk fɔ sɛtul. If dɛn nɔ bin gɛt tin dɛn we de mek di emulshɔn tik, i go separet, i go go tu dip insay di klos, ɔ i go mek tin dɛn we nɔ ivin.

Aokai PTFE dɔn optimiz tiknɛr sɛlɛkshɔn akɔs bɔku impregnashɔn fɔmyulashɔn dɛn. Dis atikul de εksplen di fכ kכr fכnshכn dεm we tikna dεm de du na PTFE εmulshכn.

Suspension Stabilizashɔn & Anti-Sɛtlin

PTFE rεsin gεt hכy dεnsiti (aprכksimatli 2.2 g/cm³) εn i kin tεnd fכ sεtul εn at bad bad wan insay wata. if yu nכ stebul, di emulshכn de separet insay wan sεdimεnt-rich layεr εn wan klia likwid layεr – we de mek i nכ yus fכ kכnsistεnt kכt.

aw tikna dεm de wok: Tikna dεm de rayz di viskositi fכ di akyu fεz dεm bad bad wan, we de fכm wan nεtwכk strכkchכ we de sכpכt rεsin patikyula dεm. Dis:

• i de εkstεnd di emulshכn shelf layf – i de stil yus fכ mכnt pas de dεm

• I de mek di faz separeshɔn we dɛn de transpɔt ɛn stɔrɔj

• I de pul di kek – di sedimɛnt we dɔn at na di bɔt ɔf di kɔntena dɛn

Aokai PTFE not: Fכ emulshכn dεm we dεn stכr ova 30 dez, wi rεkomεnd fכ ri-homogenization bifo yu yuz am, ivin wit tikna, as lכng tεm statik stכrej kin stil mek slo sכt.

Shia-Tinning Bihayvya fɔ Izi Prɔsesin

Tikna dεm de εndow di emulshכn wit shia-tinin (pseudoplastic) bihayvya: hכy viskositi we i rεst, lכw viskositi כnda agitεshכn.

Praktikal impak: We dɛn de kɔt dip, di ɛmulshɔn de flɔ fri wan insay di fayv glas klos ɔnda shia, dɔn i de tik wantɛm wantɛm afta dɛn dɔn kɔt am fɔ mek i kɔntinyu fɔ gɛt yunifom wet film tik we nɔ gɛt drip.

Rigulεt Pεnεtreshכn Dip & Kכtin Weyt

we yu impregnate porous sabstεrayt lεk fayv glas klot, adjכst di tכp εn doz fכ tikna dεm de alaw prεsis kכntrכl oba emulshכn pεnεtreshכn dip.

aw tikna dεm de kכntro dis: We di viskositi hכy de slo di pεnεtreshכn, we de lεf mכr rεsin na di sכfa. di viskositi we lכw de alaw fכ dip dip insay di fayv glas bכndεl. Dis de ditarmin di fainal resin lod en han fil fo finish prodak.

Improving Film Uniformity & Mek shɔ se Rɛsidyu-Fri Sintering

1. Film yunifom we dɛn de drɛy

Sufayf viskositi frɔm tikna dɛn:

• I de stɔp krak krak we di mɔstɔ de muf kwik kwik wan we i de drɛy

• I de mek di kɔtin tik we nɔ ivin (tik ed dɛn, tin sɛnt) .

• I de mek am izi fɔ mek flat, kɔntinyu praymari fim dɛn

• Ridyus di 'kɔfi ring ifɛkt' usay ɛmulshɔn de muf go na di ɛj dɛm

2. Di krichɔ rikwaymɛnt – rɛsɛdyu-fri sintering

PTFE emulshכn nid fכ sinter na aprכksimatli 380°C fכ fכs PTFE patikyula dεm insay wan kכntinyu film. Dis prɛzɛnt wan spɛshal rikwaymɛnt fɔ tikna dɛn:

Di tikna dɛn we dɛn dɔn pik fɔ bɔn ɔltogɛda witout rɛsɛdyual ashis na dis tɛmpracha.

Aokai PTFE de yuz sεlulכz-bεys tikna dεm (εgz., mεtil sεlulכz) we de bכn כf kכmplit wan na 380°C, we nכ de lεf nכ ash. Wi kin se yu fɔ avɔyd tik tin dɛn we gɛt inɔgɛnɛk sɔl ɔ mɛtal ɔksayd we de lɛf tin dɛn we lɛf.

Sɔmari – Tiknɛr Sɛlɛkshɔn Krayteria fɔ PTFE Ɛmulshɔn

Aokai PTFE de pik tikna dɛn we de balans ɔl di 4 wok dɛn we dɛn de mek shɔ se dɛn de bɔn kɔmplit wan we dɛn de sinta. Fɔ kɔstɔm impregnashɔn fɔmyulashɔn, wi kin ajɔst tikna tayp ɛn doz fɔ mach yu spɛshal kɔtin wet ɛn fabrik penetreshɔn rikwaymɛnt.

Dis teknikol brif na Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu nid ditayl spɛsifikɛshɔn, aplikeshɔn kes ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj inklud PTFE ay-tɛmpracha fabrik, PTFE adeziv tep, PTFE mɛsh bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE kɔt klos, ɔt-rɛsistant kɔnvayɔr bɛlt ɛn ay-tɛmpracha fayv glas fabrik, duya kɔntakt wi tru di chanɛl dɛn we de dɔŋ ya:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di savis filɔsofi fɔ profeshɔnal ɛn intɛgriti, we de dediket fɔ gi yu wan-stɔp intagreted sɔlvishɔn ɛn tink gud wan kastoma savis!