Wetin na di tipik layn spid rɛnj fɔ wan Teflon ay-tɛmpracha fabrik impregnashɔn prodakshɔn layn?

I. Kɔmɔn Layn Spid Sɛtin Rɛnj dɛn

1. Kɔnvɛnshɔnal tin prodakt (0.08–0.30 mm) .

   Mɔs prodakshɔn layn dɛn fɔ Teflon fayv glas fabrik de wok stebul wan pan 1–3 m/min, wit wan ɔvala rɛnj we na 0.5–3 m/min.

2. Tik ɔ multi-impregnated prodakt (≥0.4 mm) .

   dis dεm nid mכltipכl impregnashכn–drying–sintering saykl dεm, wit di layn spid we kin rεdכks bכku tεm to 0.3–1 m/min.

3. High-efficiency prodakshɔn layn dɛn we gɛt lɔng drying ovens

   We di ɔvin lɔng ɛn di tɛmpracha zon dɛn dɔn inof, di spid kin inkrisayz to 3–6 m/min, bɔt dis kin put rili ay dimand pan di ikwipmɛnt.

II. Proses Taym: Di Rigid Kɔnstrakshɔn fɔ Dray ɛn Sintering

1. Difɛkt dɛn we kin kam bikɔs dɛn nɔ drɛy fayn

   If di klos go insay di ay-tɛmpracha sintering sɛkshɔn wit rɛsɛdyual mɔstɔ, di wata go bɔl bad bad wan, we go mek bɔbul, pinhol, ɛn wayt spat dɛn. Fɔs, di klos fɔ dray fayn fayn wan na 100–250°C.

2. Mandatory residence taim fɔ sintering

   PTFE patikyula dεm nid fכ mεlt εn fכm wan film na 380–400°C, tipikli i nid fכ rεsidεns tεm fכ 1–3 minit—lכng fכ tik fabrik dεm. If yu nɔ gɛt bɛtɛ tɛm, dat go mek yu nɔ adheshon fayn ɛn i go krak.

3. Spid siling ɔnda fiks ɔvin lɔng

   We di ɔvin lɔng nɔ de chenj, dɛn kin no di layn spid dairekt wan bay di smɔl tɛm we dɛn nid fɔ drɛy ɛn sinta. Dis na di men tin we de ambɔg am.

III. Matching Material Karakta wit Proses Paramita

1. Impregnation solids kɔntinyu ɛn viskɔsiti

   Dispershכn dεm wit hכy sכlid kכntεnt εn hכy viskositi de infiltrate εn lεvεl sloslo. If di layn spid pasmak, i go mek di kɔtin pik-ap nɔ ivin, we go mek i strek ɔ sag.

2. di tik we di kכt de tik εn di nכmba fכ di impregnashכn pas

   Fɔ wan singl impregnashɔn pas wit wan tin kɔtin, di layn spid kin rili ay. Fɔ prodak we nid bɔku pas fɔ bil tik, di spid fɔ fayn-tyun fɔ ɛni pas, wit di las pas tipikli rɔn slo fɔ mek shɔ se i lɛvɛl gud.

3. Fabrik tik ɛn waid

   Tik ɛn dens fayv glas klos dɛn kin absɔb wata ɛn transfa ɔt sloslo, we kin mek di tɛm we dɛn kin drɛy ɛn sinta kin lɔng. I nɔ kin izi fɔ mek dɛn ɔt di wayd klos dɛn di sem we, bɔku tɛm i kin mek di ed dɛn ɛn di sɛnt difrɛn kɔlɔ dɛn, ɛn dis kin mek dɛn nid fɔ ridyus di spid.

IV. Balɛns Ikwipmɛnt Kapabiliti ɛn Kwaliti Rikwaymɛnt

1. Oven lɔng ɛn tɛmpracha zon kɔnfigyushɔn

   Lɔng ɔvin dɛn wit mɔlti-zon dizayn dɛn kin rili ɛkstɛnd di ifɛktiv ɔt tɛm, we kin alaw fɔ mek layn spid ay. Ol shɔt ɔvin dɛn kin jɔs rɔn pan 1–2 m/min.

2. Hitin efyushɔn ɛn ɛkzoz kapasiti

   Hot-eya sirkuleshɔn ɛn fa-infrared ɛp kin mek di dray ɛn sinta kwik kwik wan. Di ɛkzoz we nɔ fayn kin mek di stim kɔntinyu fɔ de, we kin mek di say we di wata nɔ fayn ɛn i kin fos di prodakshɔn we i nɔ de spid.

3. Trade-offs in apinans kwaliti standad

   We Teflon ay-tɛmpracha fabrik nid strikt spɛsifikɛshɔn—nɔ pinhol, bɔbul, krak, ɛn tayt tik tolɛreshɔn—i nid fɔ gɛt smɔl spid fɔ ajɔst wan ay yield rit, we de mek di layn spid sɛtin mɔ kɔnsavayv.

---

Di infɔmeshɔn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan mɔ bɔt di ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ, ɛn kɔstɔmayshɔn sɔlvishɔn fɔ wi ful rɛnj ɔf prɔdak dɛn—inklud Teflon ay-tɛmpracha fabrik, Teflon ay-tɛmpracha tep, Teflon ay-tɛmpracha mɛsh bɛlt, sim-silin mashin simlɛs bɛlt, singl-sayd PTFE klos, ay-tɛmpracha kɔnvaysɔ bɛlt, ɛn fayv glas klos dɛn we gɛt ay tɛmpracha—duya fil fri fɔ kɔntakt wi tru dɛn tin ya:

Savis hotlayn dɛn:

- Mista Guo: 18944819998

- Mista Liu: 13705266308

Wi de ɔltɛm sɔpɔt wan prɔfɛshɔnal ɛn intɛgriti-driven savis filɔsofi, ɛn wi dɔn mekɔp wi maynd fɔ gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis!