Wetin na di aplikeshɔn dɛn fɔ PTFE ay-tɛmpracha fabrik dɛn na kabɔn fayba flat kɔmpɔzit prɔdak dɛn?

Aplikeshɔn dɛn fɔ PTFE Ay-Tɛmpratura Fabrik dɛn na Kabon Fayba Flat Prodakt dɛn Introdyushɔn bay Jiangsu PTFE Ay-Tɛmpratura Fabrik Manufacturers

I. Kɔmpreshɔn Moldin: Dimɔldin ɛn Separeshɔn

Mold Anti-Sticking ɛn Demolding Cut PTFE ay-tɛmpracha fabrik dɛn de put bitwin ɔpa/lɔwa mold ɛn kabɔn fayba prɛpreg. Dɛn de mek di epoxy resin nɔ adhe to mold dɛn we dɛn de kɔrɛkt, dɛn de mek am izi fɔ demolding panɛl dɛn, protɛkt mold dɛn fayn fayn wan ɛn ɛkstɛnd di savis layf.

Separeshɔn fɔ Multi-Layer Flat Panels We dɛn mold bɔku tin panɛl dɛn wan tɛm insay wan mold, PTFE fabrik dɛn we dɛn sandwich bitwin panɛl dɛn de avɔyd fɔ adheshon dɛnsɛf ɛn garanti smol surface finish fɔ wan wan panɛl dɛn.

II. Vakum Bag Molding: Rilis ɛn Surface Teksturing

Riyuzable Rilis Film Le PTFE fabrik bitwin kabɔn fayba prɛpreg ɛn brida klos fɔ riples dispɔzabl rilis film dɛn. Di klos dɛn kin mek gas ɛn di rɛsin we pasmak pas. Dɛn kin pul dɛn izi wan afta dɛn dɔn wɛl ɛn yuz dɛn bak bɔku tɛm, we kin rili kɔt di kɔst fɔ mek dɛn.

Impart Fabric Texture on Surfaces Di tekschɔ sayd fɔ standad PTFE fabrik dɛn kin transfa fayn tɛkstɔr dairekt pan kabɔn fayba flat panɛl fɔ impɔtant bonding roughness ɛn ɛliminet di sanding prɔses dɛn we de kam afta dat.

III. Kɔntinyu Prodakshɔn: Kɔnvɛyshɔn ɛn Prɛshɔn Ikwalayzeshɔn

Simlɛs Nɔn-Stik Kɔnvaysɔ Bɛlt Insay kɔntinyu lamination prodakshɔn layn, dɛn kin mek PTFE fabrik dɛn insay ɛndlɛs kɔnvayɔr bɛlt fɔ kɛr prɛpreg tru ɔt ɛn prɛs zon. Dɛn nɔ-stik prɔpati de mek dɛn nɔ adhesion we di panɛl dɛn kɔntinyu fɔ muv ɛn i de mek di say dɛn we dɛn de yuz klin.

Kushin Laya fɔ Yunifɔm Prɛshɔn PTFE fabrik dɛn gɛt mɔdaret fleksibiliti ɛn mɛkanikal trɛnk, we de sav as kusɛn fɔ sheb prɛshɔn ivin akɔdin to di panɛl sɔfa ɛn ridyus difrɛns dɛn lɛk lokaliz indenteshɔn.

IV. Ripa, Stret ɛn Jɛnɛral Protɛkshɔn

Anti-Sticking Mat fɔ Ripa Wok We yu de du lokal hot-pres ripa fɔ di kabɔn fayba flat panɛl dɛn, kɔba di say we yu dɔn ripɛnt wit PTFE fabrik fɔ mek di rɛsin we ful-ɔp nɔ go dɔti di ikwipmɛnt fɔ ɔt. Yu kin pul di klos dɛn we yu nɔ gɛt ɛni tray afta dɛn dɔn wɛl.

Kushin Laya fɔ Panɛl Stret We yu de stret panɛl dɛn we dɔn wɔp ɔnda ɔt ɛn prɛshɔn, PTFE fabrik dɛn we dɛn put insay de avɔyd fɔ krɔs di sɔfays we dɛn de gi nɔ-stik pefɔmɛns.

Wokbench Protɛkshɔn ɛn Sɛlɛkshɔn Gaydlain Le PTFE fabrik dɛn pan wokbench dɛn we dɛn de lay-ap ɛn rɛsin aplikeshɔn. Yu kin skrap di rɛsin drip dɛn we dɔn wɛl izi wan fɔ mek di say dɛn we dɛn de wok klin.

Fɔ kabɔn fayba flat panɛl wit tipik kɔring tɛmpracha we na 120°C–180°C, PTFE fabrik dɛn we tik we de frɔm 0.08 mm to 0.25 mm na infεkt. Pik tep dɛn we smol smol ɔ prɛmiɔm klos dɛn if yu nid fɔ gɛt panɛl we gɛt glos; pik standad tεkschur fabrik dεm if surface tεkschur nid fכ εnhans adheshon.

Di infɔmeshɔn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful-rɛnj prodak dɛn we inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha adeziv tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha resistant fiberglass fabrics, duya kɔntakt wi bay di we dɛn we de dɔŋ ya:

Savis Ɔtlayn dɛn:

Mista Guo: +86 18944819998 pipul dɛn

Mista Liu: +86 13705266308 pipul dɛn

Fɔ fala di savis filɔsofi fɔ profeshɔnal ɛn intɛgriti, wi dɔn mekɔp wi maynd fɔ gi yu wan-stɔp sɔlvishɔn ɛn savis we yu tink gud wan!