Surface finishing agents we dɛn aplay to fiberglass fabric bifo PTFE coating na impɔtant tin fɔ fainal PTFE ay-tɛmpracha klos pefɔmɛns. כrganosilane kכplεn ejen dεm de mek mכlikul brij bitwin inכrganik glas fayba εn כrganik PTFE, we de bכst di trεnk fכ di pil frכm <2 N/cm to 4-8+ N/cm. di rayt tritmɛnt de ɛp bak fɔ mek yu nɔ gɛt wam (260°C+), yu nɔ de wok wit dayelɛktrik, ɛn i de mek yu nɔ gɛt kemikal. Fabrik we dɛn nɔ trit kin mek i delamination, bubbling, ɛn shɔt savis layf.

Warp ɛn weft density fɔ fayv glas fabrik de ditarmin PTFE ay-tɛmpracha klos pefɔmɛns. di hכy dεnsiti de inkrεs di tεnsil trεnk εn di sכfa smol sכft bכt i de ridyus tεar trεnk (invεst U-kכv), fεksibiliti, εn kכt pεnεtreshכn. Optimal density balans penetration, tear resistance, fleksibiliti, ɛn surface finish. Low density suits dinamik bɛnd; ay density fɔ nɔ-stik ɛn insuleshɔn.

Fayba glas wev patɛn – plein, twil, ɔ satin – rili afɛkt PTFE ay-tɛmpracha fabrik prɔpati dɛn. Satin wev de gi ayest tear strength (2-3x plain) ɛn fleksibiliti, we fayn fɔ dinamik bɛnd. Plɛn wev de gi bɛst dimɛnshɔnal stebiliti ɛn peel adheshon, we fit fɔ statik aplikeshɔn dɛn. Twill balans ɔl di prɔpati dɛn fɔ jenɛral yus.

Kotin yunifomiti fɔ PTFE ay-tɛmpracha fabrik na 4 tin dɛn de disayd: kɔtin fɔmyulashɔn (patikul saiz 0.15-0.35 μm, viskɔsiti, sɔlid kɔntinyu), kɔtin & sinta prɔses (bled kɔtin we dɛn kin lɛk fɔ yunifom), sabstret kwaliti (wev patɛn, prɛ-tritmɛnt), ɛn prodakshɔn ɛnvayrɔmɛnt (20-25°C, <60% RH). Dip + bled kɔmbayn prɔses balans penetreshɔn ɛn sɔfays smol smol.

Fɔ klin ɛn mentenɛns di rayt we fɔ mek PTFE ay-tɛmpracha fabrik de liv lɔng. Klin afta yu dɔn yuz am ɛn afta yu dɔn kol. Yuz saf brɔsh, nyutral ditajɛn, ɔ rɔm fɔ gɛt stɛyn. Nɔ ɛva yuz strɔng asid/alkali, blich, ɔ mɛtal skrap. We yu de yuz silikon ɔyl ɔltɛm, dat kin mek yu nɔ wɛr fayn. Fɔ fala dɛn gaydlain ya fɔ mek di kɔtin nɔ pwɛl.