PTFE ay-tɛmpracha fabrik na prɛsayz fɔ in nɔ-stik, ɔt-rɛsistant, ɛn kemikal-rɛsistant prɔpati dɛn. Bɔt ivin dis tin we go de sote go nid fɔ kia fɔ am di rayt we. Fabrik we dɔti, we gɛt dɔti, ɔ we skrach kin lɔs in nɔ-stik wok ɛn i kin fel bifo tɛm.
Di gud nyus: fɔ klin PTFE fabrik na tin we izi fɔ du – if yu fala di rayt we dɛn ɛn avɔyd kɔmɔn mistek dɛn.
Aokai PTFE dɔn prodyuz ɛn tɛst PTFE klos fɔ bɔku bɔku ia. Dis gayd de tɔk bɔt di prinsipul dɛn fɔ klin, stɛp-by-stɛp we fɔ mek difrɛn stɛyn dɛn, ɛn fɔ mentenɛns ɔltɛm fɔ mek di savis layf go bifo.
Prinsipul dɛn fɔ Klin – Fo Golden Rul dɛn
Prinsipul
Wetin Mek I Impɔtant
Klin am di rayt tɛm
I de mek dɔti nɔ gɛda we de mek stɛp skel ɛn abrayd di say we di wata de
Klin am afta yu dɔn kol
If yu klin am na ay tɛmpracha, dat kin mek di ditajɛn go insay di kɔtin ɔ mek di kɔtin kɔmɔt
Nɔ yuz kemikal dɛn we at fɔ yuz
Strɔng asid, strɔng alkali, blich we gɛt klorin (ɛgz., blich we de na os) ɛn klin we gɛt fluorine kin kɔrɛkt di PTFE kɔtin bad bad wan
Nɔ yuz had tul dɛn
Stilin wul, stif brɔsh, mɛtal skrap – dɛn wan ya de skrach di PTFE kɔtin ɛn fayv glas sabstret dairekt wan
Wetin go apin if yu nɔ pe atɛnshɔn to dɛn tin ya? Skrach kɔtin de lɔs nɔ-stik prɔpati dɛn; kεmikכl atak de mek blista εn delamination; we yu klin we i wam, i kin trap di tin dɛn we de dɔti ɔnda di kɔtin.
Di tin we kin mek PTFE fabrik nɔ wok na we i nɔ wɛr – na fɔ klin di rayt we. Insay it plant, di wan dɛn we de wok kin yuz stenlɛs stiɛl skrapa fɔ pul di tin dɛn we dɛn dɔn bek, dɛn nɔ kin no se di PTFE kɔtin na 10-25 maykron nɔmɔ tik. wan singl skrach kin mek di fayv glas sabstεrayt kכmכt, we kin afta dat abzכp mכsichכ εn gris, we kin mek i kכmכt na di lכkal dεlaminεshכn. We di sabstret dɔn kɔmɔt na do, dɛn fɔ chenj di klos. Wan ɔda mistek we dɛn kin mek bɔku tɛm na fɔ yuz klorin-based klin (ɛgz., blich) fɔ mek di klos wayt. klorin de atak PTFE na di mכlikul lεvεl, we de ridyus in mכlikul wet εn mek di sכfayz krak afta ripit tεmכl saykl. Di tin dɛn we sef fɔ klin na wata, mild dish sop, ethyl alcohol (70%), ɛn wayt vinega – nɔ pan dɛn nɔ de pwɛl PTFE. Fɔ ɛni kemikal klin, ɔltɛm tɛst pan smɔl say we ayd fɔs ɛn was am fayn fayn wan.
Aokai PTFE dɔn si di kɔstɔma dɛn de ɛkstɛnd di klos layf frɔm 6 mɔnt to ova 2 ia jɔs bay we dɛn de chenj frɔm mɛtal skrap to plastic skrap ɛn klin wit wam wata ɛn mild ditajɛnt afta ɛni shift. Smɔl chenj dɛn kin mek big difrɛns.
Di we aw fɔ Klin bay di tin dɛn we apin
Sɛnario fɔ Klin di ples
Di We dɛn we Dɛn Rikɔmɛnd
Krio Notis dɛn
Fɔ klin layt ɛvride (dɔst we de ɔp, dɔti) .
1. Swip saful wan wit saf brɔsh. 2. Blow ɔf dɔst wit lɔw-prɛshɔn kɔmprɛsd ɛya (≤0.3 MPa) .
Rigul di prɛshɔn fɔ di briz – di ay prɛshɔn kin pwɛl di kɔtin
Rinse ɔl di ditajɛnt rɛsɛdyu dɛn fayn fayn wan – di rɛsɛdyu kin kabɔniz we yu de yuz am afta dat
Stɛyn stɛyn dɛn (gris, srɔp, layt rɔst) .
1. Waip wit sɔft klos we dɛn dɔn wet wit alkol we pɔsin kin it (70%) ɔ wayt vinega . 2. Put diluted wik alkaline solushɔn (10% nyutral ditajɛnt, sop wata, diluted amonia) as i fayn. 3. Yuz dediket PTFE klin
Kɔndɔkt wan spɔt tɛst pan say we yu nɔ de si bifo yu yuz ɛni kemikal ɛjɛn
Di adhesive residues we dɔn wɛl (hot melt adhesive, EVA glu, ɛn ɔda tin dɛn)
1. Sɔft adhesive wit ɔt gɔn na 50-80°C. 2. Skrap ɔf jisnɔ wit plastic skrap ɔ wud pis ; was am klin wit wam wata ɔ rɔm
Strikt wan kɔntrol di ɔt gɔn tɛmpracha; avɔyd fɔ ɔt fɔ lɔng tɛm na wan ples. Dɛn nɔ de alaw pipul dɛn fɔ kɔt mɛtal
Iridescent layn dɛn na di surface
Klin wit wam wata + nyutral ditajɛn. dis mak dεm kin bi sכfayz כksidεshכn כ kכntaminεshכn – we dεn pul dεm insay di tεm, i de mek i nכ de pwεl mכr
If mak dɛn stil de afta dɛn dɔn klin, di kɔtin kin dɔn ol – i nid fɔ inspɛkt am ɔltɛm
Rutin Mentɛnans – Bifo Klin
If yu mentenɛns di klos fayn fayn wan, dat kin mek di tin dɛn we de na di klos nɔ gɛt bɛtɛ tin fɔ it ɛn di tin dɛn we de pwɛl di klos, ɛn dis kin mek di klos lɔng bad bad wan.
Riples mɛtal tul dɛn wit silikon ɔ wud tul dɛn we dɛn de wok ɛvride
I de mek pɔsin nɔ skrach
Prɔfɛshɔnal mentenɛns ɔltɛm
Inspek di ikwipmɛnt ɔpreshɔn kɔndishɔn ɔltɛm – mɔ di transmishɔn lɔbrikeshɔn; riples ɔyl ɛvri ia
I de mek sɛkɔndari damej frɔm di ikwipmɛnt fɔlt
Fɔ PTFE fabrik dɛn we dɛn kin yuz as kɔnvayɔr bɛlt fɔ bek ɔ dray aplikeshɔn, dɛn kin se dɛn fɔ lobrik di sɔfays wit fud-grɛd silikon ɔyl ɛvri 200-300 awa we dɛn de wok. Put layt mist we di bɛlt de muv wit smɔl spid, dɔn alaw am fɔ rɔn fɔ 5-10 minit fɔ sheb ivin. If yu lɔbrik pasmak, dat kin mek dɔst kam, so smɔl na mɔ. Fɔ aplikeshɔn dɛn we nɔto it, dɛn kin yuz dray lɔbrik lɛk PTFE sprɛy. Wan ɔda wok we dɛn nɔ kin no bɔt fɔ mek di bɛlt fayn na fɔ chɛk aw di bɛlt de trak. Bɛlt dɛn we nɔ fayn kin mek di ed rɔtin ɛn nɔ ivin wɛr – ajɔst di trak ɛvri mɔnt. Fɔ dɔn, kip wan mentenɛns lɔg. Fɔ rikodɔ di de dɛn we dɛn klin, di we aw dɛn de yuz di lɔbrik, ɛn di we aw dɛn de wɛr we dɛn si, dat kin ɛp fɔ tɔk bɔt di tɛm we dɛn fɔ chenj. Bɔku plant dɛn kin tek ples fɔ PTFE fabrik pan wan fiks schedule (ɛgz., ɛvri 6 mɔnt) ilɛksɛf di kɔndishɔn, we kin west yuz layf. If yu mentenɛns am fayn, sɔm klos dɛn kin las fɔ 3-5 ia.
Kwik Rifrɛns – Di tin dɛn we yu fɔ du ɛn wetin yu nɔ fɔ du
✅ Du am
❌ Nɔ du am
Klin afta ɛni yus, we i kol
Klin we i wam (>100°C) .
Yuz saf brɔsh, klos, plastic/wud skrap
Yuz stɛl wul, mɛtal skrap, stif brɔsh
Yuz wata, mild dish sop, alkol (70%), wayt vinega
Yuz strɔng asid, strɔng alkali, blich, fluorine-based klin
Rinse di tin dɛn we lɛf na di ditajɛn fayn fayn wan
Lɛf ditajɛn rɛsɛdyu – i de kabɔn we dɛn ɔt am
Put silikon ɔyl fɔ aplikeshɔn dɛn we gɛt ay frikshɔn
Ɔva-lɔbrik – i de atrak dɔst
Inspek rola ɛn trak ɛvri mɔnt
Ignore misalignment ɔ rough komponent dɛn
In sɔmari , fɔ klin ɛn mentenɛns PTFE ay-tɛmpracha fabrik na simpul tin if yu fala 4 golden lɔ dɛn: klin kwik kwik wan, klin afta yu dɔn kol, avɔyd harsh kemikal, ɛn avɔyd had tul dɛn. Yuz saf brɔsh, wata, nyutral ditajɛn, ɔ rɔm fɔ bɔku pan di stɛyn dɛn. Fɔ adhesives we dɔn wɛl, soft am wit smɔl ɔt ɛn skrap wit plastic tul dɛn. Ad silikon ɔyl wan wan tɛm fɔ ay-frikshɔn aplikeshɔn, inspɛkt rɔla ɛn trak, ɛn kip wan mentenɛns lɔg.
If yu kia fɔ am fayn fayn wan, PTFE klos kin las fɔ lɔng tɛm pas di klos we dɛn nɔ tek tɛm wit. Di invɛstmɛnt fɔ gud abit fɔ klin de pe fɔ ridyus di tɛm we dɛn de wok ɛn di kɔst fɔ riples.
Nid mɔ ditayla mentenɛns gayd fɔ yu patikyula aplikeshɔn? Aokai PTFE de gi tɛknikal sɔpɔt ɛn kɔstɔmayz mentenɛns schedule. Kɔntakt wi wit yu ikwipmɛnt tayp, ɔpreshɔn tɛmpracha, ɛn tipik kɔntaminɛnt dɛn.
