Fɔ Ekstrim Kɔndishɔn & Lastin Pɔfɔmɛnshɔn
Yu Rilaybul PTFE Fayba Glas Tep Manufacturer

Yu Gɛt Efyushɔn: Swift Sapɔt, 20+ Ia Ɛkspɛriɛns

Yu Gɛt Maks. Valyu: Prɛmiɔm Prodak, Ay Margin

RIKƐST KƆT

Silikɔn adhesive tep

Dɛn kin kɔl silikon adeziv tep bak PTFE Adhesive Tep.

1.Non-stik PTFE kotin;
2.Easy fɔ klin, anti-viskɔsiti, kɔrɛshɔn rɛsistɛns;
3.Can yuz ripit, izi fɔ riples;
4.Wɛda rɛsistɛns, anti-ɛj;
5.Specially fɔ ɔt silin ɔpreshɔn;
6.Sɛtifiket dɛn: ISO 9001: 2015, FDA & UL;
7.Eksɛlɛnt savis & sɔpɔt inklud prɛ-sɛl, in-sɛl & afta-sɛl;
8.Aksept kɔstɔmayt;
9.OEM / OBM savis.


Di tin dɛn we yu kin gɛt:



Aks kwɛstyɔn

Silikɔn adhesive tep

Di Kategori fɔ Prodakt

Diskripshɔn fɔ di Prodak

Dis tep na silikon adeziv we dɛn put pan wan bays matirial we dɛn mek wit glas klos we dɛn kɔt wit silikon.

Prodakt Ficha dɛn fɔ Silikɔn adhesive tep

I de gi fayn fayn grip pefɔmɛns ɛn ɔt rɛsistɛns, ɛn yu kin yuz am ɔnda ay-tɛmpracha kɔndishɔn.

Aplikeshɔn dɛn fɔ Silikɔn adhesive tep

Ilɛktrik Insuleshɔn: Dɛn kin yuz am fɔ mek ilɛktrik insuleshɔn we gɛt ay tɛmpracha na motoka, transfɔma, ɛn ilɛktronik tin dɛn.

Hɛt Silin: I de protɛkt sɔfays fɔ sɔm tɛm we dɛn de du ɔt silin ɔ laminɛshɔn prɔses.

Teknik Paramita dɛn fɔ Silikɔn adhesive tep

Prodakt kod	Total tiknɛs mm	Standart wird mm(in) .	Maksimal wit mm	Lɛngth m
SP	0.2	25,50 pipul dɛn	350	25

Silikɔn adhesive tep Manufacturer

Aokai PTFE de pe atɛnshɔn fɔ gi ay kwaliti Silicone adhesive tape ɛn fayn fayn savis lɛvɛl dɛn. Wi na profeshɔnal Silicone adhesive tape manifacturers we go ɛp yu pan dɛn eria ya: besik matirial, finish prodak kwaliti, delivri, ɛn afta-sɛl savis. Aokai de gi yu ɔlsay, kɔstɔmayshɔn, dizayn, pak, industri sɔlvishɔn, ɛn ɔda OEM OBM savis dɛn. Wi profeshɔnal R&D tim, prodakshɔn tim, kwaliti inspekshɔn tim, tɛknikal savis tim, ɛn pri-sɛl & afta-sɛl savis tim go gi yu wan-stɔp savis, sev yu tɛm ɛn mek shɔ se di mɔs prɔfɛshɔnal prodak kwaliti.

Patna dɛn we de wok togɛda

Usay fɔ bay Silikɔn adhesive tep?

If yu gɛt ɛni kwɛstyɔn bɔt Silicone adhesive tape , duya nɔ shek fɔ kɔntakt wi na mandy@akptfe.com go si am . Wi go gi ditayla infɔmeshɔn ɛn tɛnki sɔpɔt bɔt di prɔdak ficha dɛn, spɛsifikɛshɔn dɛn, sɔlvishɔn dɛn ɛn kɔstɔmayshɔn opshɔn dɛn... Wɛlkɔm yu fɔ kam na wi faktri!

Fɔ aks kwɛstyɔn ɔ fɔ mek ɔda, duya kɔntakt wi.

Q A kin ɔda kɔstɔm wit ɔ lɔng?

A Yɛs. Wi de gi yu kɔstɔm wit, tik, ɛn rol lɔng fɔ fit yu prɔses. Kɔntakt wi sɛl tim wit yu spesifikeshɔn ɛn kwantiti we yu nid.
Q Aw a fɔ kip ɛn handle di tep?

A Stɔ na ples we kol ɛn dray we nɔ gɛt dairekt san ɛn ɔt sɔs. Nɔ fɔ de na di wata we de na di wata fɔ lɔng tɛm. Kip di rol insay in fɔs pak we yu nɔ de yuz am.
Q Wetin na di tipik lida tɛm?

Wan Standard prodakt ship insay 7 biznɛs dez afta dɛn dɔn kɔnfɔm di ɔda; di kɔstɔm opshɔn dɛn kin tek lɔng tɛm. Wi go konfam wan fam lida taim wit yu at oda.
Q Di adhesive na silikon-based, akrilik, silikon-asetate?

A Di adeziv na silikon-based, bɔt, di kɔstɔma kin kɔstɔmayz akrilik-based tep, we de gi ay adheshon.
Q Wetin na di difrɛns bitwin PTFE silikon adeziv tep ɛn PTFE akrilik tep?

WAN
Tɛmpratura pefɔmɛns

● Silikɔn adeziv:

Eksɛlɛnt ay-tɛmpracha stebiliti ɛn i de kɔntinyu fɔ fleksibul na lɔw tɛmpracha; fayn fɔ tɛmal sayklɔs ɛn gasket/sil.

● Akrilik adeziv:

Gud ɔvala tɛmpracha pefɔmɛns bɔt jɔs nɔ kin fleksibul lɛk silikon; i kin bi mכr brit we di tεmprechכr rili lכw כ i kin sכft we di tεmprachכ hכy.

Kεmikכl rεsistεns εn envayroment

● Silikɔn adeziv:

I fayn fɔ mek i nɔ gɛt wata, i kin put am insay wata, i kin mek i nɔ gɛt UV (fɔ yuz am na do), ɛn i kin yuz bɔku kemikal dɛn; de mek i kɔntinyu fɔ gɛt ɛlastik.

● Akrilik adeziv:

Gud kεmikכl εn UV rεsistεns fכ plεnti envayroment bכt tipikli less fleksibul pas silikon; di wεda rεsistεns na fכmyuleshכn-dipεndεnt.

Fleksibiliti vs rigiditi

● Silikɔn adhesive pan PTFE:

Mɔ fleksibul, ebul fɔ akɔmod muvmɛnt, vaybreshɔn, ɛn tɛmal ɛkspɛnshɔn we nɔ go lɔs sil.

● Akrilik adhesive pan PTFE:

Tipikli stiff; strɔng initial hold bɔt less fɔgiv wit muvmɛnt; bɛtɛ fɔ rigid, ay-tak bɔnd dɛn.

Prodakt dɛn we gɛt fɔ du wit dis

Tep we dɛn kɔl PTFE

Ultrahigh Molecular Weight Polietilen (UHMWPE) adhesive tep

PTFE zon tep dɛn

PTFE Tape Fɔ Hɛt Sila

Blak anti-statik PTFE tep

Blak anti statik PTFE tep

PTFE Fayberglass Tep wit Rilis Layna

PTFE Fayba Glas Tep

Blak PTFE Tep we yu kin yuz

Atikul dɛn we gɛt fɔ du wit dis

[PTFE Adhesive Tep we yu kin yuz ] Us Sɛtifiket dɛn A fɔ Luk fɔ na Food-Grade PTFE Tape?

Us Sɛtifiket dɛn A fɔ Luk fɔ na Fɔd-Grɛd PTFE Tep?Di impɔtant kwalifayeshɔn dɛn fɔ luk fɔ insay fud-grɛd PTFE adeziv tep fɔ yuz na kɔmɛshɔn na FDA kɔmplians, NSF sɛtifikeshɔn, ɛn ISO 9001:2015 kwaliti mɛnejɛmɛnt standad. Dɛn sɛtifiket ya de mek shɔ se di polytetrafluoro
[PTFE Adhesive Tep we yu kin yuz ] PTFE Fayberglass Tep vs Silikɔn Tep Kɔmpiashɔn

Bɔku pan di prokyumɛnt manija dɛn want di bɛst pefɔmɛns we dɛn de luk pan industrial adhesive choices. Dɛn nid fɔ no di difrɛns bitwin PTFE fayv glas tep ɛn silikon tep. Polytetrafluoroethylene layt de gi PTFE fayv glas tep in big nɔ-stik prɔpati dɛn we i de wef fayv glas giv
[PTFE Adhesive Tep we yu kin yuz ] Kastom PTFE Film Tep Solushɔn fɔ OEM Ikwipmɛnt

Kastom PTFE film tep sɔlvishɔn impɔtant fɔ mek mɔdan OEM ikwipmɛnt fɔ bɔku bɔku biznɛs. Dɛn spɛshal tep ya de yuz di big big prɔpati dɛn we polytetrafluoroethylene gɛt wit injinɛri we dɛn mek fɔ mit di nid dɛn fɔ patikyula ikwipmɛnt. OEM mekers dipen pan PTFE film tep beca
[PTFE Adhesive Tep we yu kin yuz ] PTFE Adhesive Tape fɔ Kɔntinyu fɔ Sial Mashin dɛn

Di nyu PTFE adeziv tep na big step fɔ go bifo fɔ kɔntinyu fɔ silin tul dɛn bikɔs i gɛt ɔl tu strɔng adhesive bak ɛn big nɔ-stik prɔpati dɛn. Dis spɛshal industrial tep fayn fɔ ɔt silin wok bikɔs i kin ebul fɔ handle tɛmpracha we go rich 260°C ɛn i nɔ de miks wit kemikal. Kɔmni we de wok
[PTFE Adhesive Tep we yu kin yuz ] Wetin Mek PTFE Adhesive Tape Ridyus Mashin Dauntaym?

Ɛvri ia, di tɛm we di mashin dɛn nɔ de wok, dat kin mek di wan dɛn we de mek tin dɛn, bɔku bɔku mɔni. Dɛn dɔn sho se PTFE adhesive tape kin sɔlv dis prɔblɛm trade. Dis spɛshal tep de stɔp di ikwipmɛnt fɔ brok bay in strɔng nɔ-stik kɔtin, ebul fɔ bia wit ay tɛmpracha te to 260°C, ɛn strɔng s