PTFE Emulsion Stability leh Impregnation Performance-a Storage Condition-in nghawng a neih dan

Jiangsu Aokai New Materials – PTFE high-temperature fabrics siamtu chuan PTFE emulsion dahkhawmna dinhmun chu a end-use performance nen a inzawm tlat dan a sawifiah a. Temperature control, ambient humidity, leh storage chhunga shelf-life maintenance te hian PTFE emulsion stability chu direct-in a hril a, hei hian PTFE emulsion impregnation process chhunga film-forming uniformity leh functionality a nghawng a ni. Storage dik lo chuan PTFE emulsion-ah hian taksa lama inthlak danglamna awm thei lo a thlen thei a, chu chuan siamchhuahna atan hman theih lohvin a siam thei a ni.

1. PTFE Emulsion-a Temperature-in nghawng a neih dan

Temperature hi PTFE emulsion stability tichhe thei physical factor pawimawh ber a ni a, temperature inthlak danglamnaah pawh a sensitive hle.

Practice : PTFE emulsion hi constant-temperature environment 5°C atanga 25°C ah khauh taka dah tur a ni . He range hian PTFE emulsion-a resin particle te chu a suspended leh dispersed reng theih nan a enkawl a ni.

Temperature hniam hlauhawmna : Ambient temperature 0°C aia hniam a nih chuan PTFE emulsion chhunga tui chu a freeze ang. Ice crystals hian emulsion-a micelle protective layer chu a tichhia ang a, chu chuan resin particle-te agglomeration tihdanglam theih loh a siam ang. Nakin lawkah temperature a san chhoh pawhin PTFE emulsion hian a dinhmun hmasa chu a la let leh thei lo va; curd ang chi sediment a siam ang a, a dik lo vek ang.

Temperature sang hlauhawmna : 35°C aia sang temperature-a rei tak awm hian PTFE emulsion-a surfactant-te hnathawh a ti tlem a, Brownian motion collision a tichak a, emulsion-a demulsification leh sedimentation a tichhuak bawk.

2. PTFE Emulsion-a Humidity leh Sealing-in nghawng a neih dan

PTFE emulsion packaging-a airtightness hian a shelf life a nghawng nghal vek a ni.

Environment mamawh : PTFE emulsion hi warehouse vawt, lum leh boruak tha takah dah tur a ni.

Sealing performance-in nghawng a neih : PTFE emulsion chu hawn emaw, seal tha lo emaw a nih chuan a chunglam tui chu a bo nghal vat ang a, emulsion chung lamah vun hring khauh tak, dispersible lo tak a siam ang. Hetihlai hian pH adjustment atana hman ammonia chu a volatilize ang a, emulsion chhunga acidity a tipung ang a, bacteria te thanlenna tur condition a siam ang a, hei hian colloidal chemical balance a tibuaitu a ni. Chuvangin, hman apiangin container khuhna chu khauh nghal tur a ni.

3. PTFE Emulsion-a Shelf Life leh Sedimentation-in nghawng a neih dan

PTFE emulsion hi a nghet reng thei lo va, ding laiin a settle ang.

Shelf-life management : PTFE emulsion hawn loh hi a tlangpuiin thla 6 atanga thla 12 chhung a awm thei . Expired emulsion chu normal angin lang mahse a impregnation adhesion leh film-forming property te chu nasa takin a tlahniam ang.

Regular agitation : PTFE emulsion-a resin particle te hian tui aiin density an nei sang zawk avangin natural stratification hi gravity hnuaiah a thleng thin. Concentration inang tlang a nih theih nan emulsion dahkhawmte chu enkawl reng a ngai a ni. Solids te chu a darh leh theih nan leh a hnuai lamah non-dispersible hard sediment a awm loh nan kar tin emaw thla tin emaw container te chu zawi zawiin roll emaw invert emaw thin a tha.

4. PTFE Emulsion Condition hian Impregnation Performance a nghawng dan dik tak

PTFE emulsion dahkhawmna dinhmun hian impregnation process hlawhtlinna chu direct-in a hril a ni. Degraded emulsion hman hian a hnuaia chhiatna te hi a thlen thin:

·  Pick-up inang lo : Sedimentation tenau tak tak hian impregnation solution concentration inang lo tak a siam a, chu chuan substrate (eg, fiberglass fabric, carbon felt)-in a hip dan inang lo a siam a, final product pumpuiah non-stick leh corrosion-resistant property inmil lo a awm bawk.

·  Surface defects : Emulsion-a agglomerated particles awm hian product surface-ah hian white specks emaw lumps emaw hmuh theih a awm a, a hmel leh a smoothness nasa takin a tichhe thin.

·  Pore blockage : PTFE emulsion chhe tawh chuan viscosity tihpun dan pangngai lo a lantir a, porous materials chu a inang tlang thei lo va, micropores a tikhawlo a, chu chuan a tum ang breathable leh hydrophobic property a hloh a ni.

Impregnation application-a performance tha ber neih theih nan Aokai New Materials chuan a hnuaia PTFE emulsion management dante hi khauh takin a zawm a ni:

·  Temperature control : 5–25°C-ah dah tur a ni a; freezing emaw direct sunlight emaw pumpelh tur a ni.

·  Airtight storage : Moisture evaporation leh vun siam loh tur.

·  Regular agitation : Container te chu a hun hunah vawt thin la, chu chu hard sedimentation a awm loh nan.

·  First-in, first-out : Expired product atanga bawlhhlawh paih loh nan shelf life kha khauh taka zawm tur.

A chunga kan tarlan te hi Jiangsu Aokai New Materials Technology Co., Ltd.

Detailed specifications, application scenarios, leh kan product range zawng zawng tana customized solutions te tan — PTFE high-temperature fabrics, PTFE high-temperature tapes, PTFE high-temperature mesh belts, bonding machine tan seamless belts, single-sided PTFE fabrics, high-temperature resistant conveyor belts, high-temperature fiberglass te pawh a tel puan, leh thil dang tam tak — min rawn biak theih reng e:

·  Service Hotline :Mr. Guo: +86 18944819998 Pu Liu: +86 13705266308 zawhfiah theih a ni

Professionalism leh integrity service philosophy zawm chungin, thinlung zawng zawngin one-stop solution leh attentive service kan pe che u a ni!