Efεkt כf Sכrej Kכndishכn pan di Stebiliti εn Impregnashכn Pεrformεns כf PTFE Emulshכn

Jiangsu Aokai Nyu Matirial – we na wan manifakta fɔ PTFE ay-tɛmpracha fabrik dɛn – ɛksplen aw di stɔrɔj ​​kɔndishɔn fɔ PTFE ɛmulshɔn gɛt fɔ du wit in ɛnd-yuz pefɔmɛns. Tεmprachכ kכntrכl, ambiεnt humiditi, εn shelf-layf mentenεns di tεm we dεn de stכrej dεn de ditarεmin di stebiliti fכ PTFE εmulshכn, we in tכn de afekt film-fכm yunifכmiti εn fכnshכnaliti di tεm we di PTFE εmulshכn impregnashכn prכsεs de. If yu nɔ kip am fayn, i kin mek di fizik chenj dɛn we nɔ go ɛva chenj to di PTFE ɛmulshɔn, we kin mek i nɔ ebul fɔ yuz am fɔ prodyuz.

1. Efεkt כf Tεmpεratכr pan PTFE Emulshכn

Tεmprachכ na di mכst krεs fכs fכs fכs we de afekt di stεbiliti fכ PTFE εmulshכn, we rili sεnsitiv to tεmprachכ fכlt.

Praktis : PTFE emulshɔn fɔ strikt wan fɔ kip am na kɔnstant-tɛmpracha ɛnvayrɔmɛnt we de 5°C to 25°C . Dis rεnj de mek sכh se di rεsin patikyula dεm na PTFE εmulshכn de stil sכspεnd εn sכspεns.

Di bad tin dɛn we kin apin we di tɛmpracha smɔl : If di tɛmpracha we de rawnd di ples go dɔŋ pas 0°C, di wata we de insay di PTFE ɛmulshɔn go friz. di ays kristכl dεm go rכp di maysεl protεktiv layεr fכ di εmulshכn, we go mek di rεsin patikyula dεm we nכ de rivεrsibl agglomereshכn. ivin if di tεmprachכ go כp leta, di PTFE εmulshכn nכ kin rεkכv in כrijinal stet; i go mek sedimɛnt dɛn we tan lɛk kɔd ɛn i nɔ go wok atɔl.

Di hazad dɛm fɔ ay tɛmpracha : Fɔ lɔng tɛm we yu de na di tɛmpracha we pas 35°C i de ridyus di aktiviti fɔ di sɔfaynt dɛm na PTFE ɛmulshɔn, i de mek di Brownian muvmɛnt kɔlishin dɛn strɔng, ɛn i de trigɛt bak dimulsifikɛshɔn ɛn sɛdimɛnt na di ɛmulshɔn.

2. Efεkt כf Humidity εn Silin pan PTFE Emulshכn

Di airtightness of PTFE emulsion packaging de afɛkt in shelf layf dairekt wan.

Di tin dɛn we di envayrɔmɛnt nid : Dɛn fɔ kip di PTFE ɛmulshɔn na say we dray, kol, ɛn we gɛt fayn briz.

Ifekt fכ siling pכrfomans : If dεn lεf PTFE emulshכn opin כ pwεl sial, di sכfayz mכsichכ go εvapכret kwik, fכm wan had, nכn-ridispersible dray skin pan di emulshכn sεf. pan tap dat, amonia we dεn yuz fכ pH ajɔstmεnt go volatilayz, i go mek di asid insay di emulshכn go כp εn i go mek kכndishכn fכ di baktri dεm gro, we de disrupt di kolכyd kεmikכl bεlε. So, yu fɔ tay di kɔntena lid wantɛm wantɛm afta yu dɔn yuz am.

3. Efεkt כf Shelf Layf εn Sedimεntεshכn pan PTFE Emulshכn

PTFE emulshɔn nɔto pɔrmɛnt stebul fluid ɛn i go sɛtul we i tinap.

Shelf-layf manejmɛnt : Unopened PTFE emulsion tipikli gɛt shelf layf fɔ 6 to 12 mɔnt . ivin if emulshכn we dεn εkspεri de sho nכmal, in impregnashכn adheshon εn film-fכm prכpati dεm go dεgrεd bכku bכku wan.

rεgulεr agitεshכn : Bikɔs rεsin patikyula dεm na PTFE εmulshכn gεt hכy dεnsiti pas wata, nεchכral stratifikεshכn de apin כnda graviti. fכ mek sכh se yunifכm kכnsantreshכn, rεgulεr mεntenans nid fכ stכr εmulshכn. I fayn fɔ rol ɔ invayt di kɔntena dɛn jisnɔ ɛvri wik ɔ ɛvri mɔnt fɔ mek dɛn skata bak di sɔlid dɛn ɛn mek dɛn nɔ mek had sedimɛnt dɛn we nɔ de skata na di bɔt.

4. Dairekt Impekt כf PTFE Emulshכn Kכndishכn pan Impregnashכn Pεrformεns

di stכrej kכndishכn fכ PTFE emulshכn de ditarεmin di sakses fכ di impregnashכn prכsεs dεn. If yu yuz di emulshɔn we dɔn pwɛl, dat kin mek yu gɛt dɛn prɔblɛm ya:

·  Pik-ap we nɔ ivin : Smɔl sɛdimɛnt de mek di impregnashɔn sɔlvushɔn nɔ kɔnsistɛns, we de mek di sabstret dɛn nɔ ivin absɔp (ɛgz., fayv glas fabrik, kabɔn fil) ɛn nɔ kɔnsistɛns nɔ-stik ɛn kɔrɛshɔn-rɛsistɛns prɔpati dɛn akɔdin to di fayn prodak.

·  Surface defects : Emulsion we gɛt agglomerated particles de lɛf wayt spɛk ɔ lumps we yu kin si na di prodakt surface, we kin rili ambɔg di apinɛns ɛn smol smol.

·  di pore blok : di PTFE emulshכn we dεn dכn dכn de sho abnכmal viskositi inkrεs, i de fεl fכ pεnεtrate di porous mεtirial dεm yunifכm εn i de kכlog di maykropor dεm, so dat de lכs di prכpati dεm we dεn bin want fכ brith εn haydrofobik.

Fɔ mek shɔ se dɛn du di bɛst wok na impregnashɔn aplikeshɔn, Aokai Nyu Matirial strikt wan de ɛnfɔs di PTFE ɛmulshɔn mɛnejɛmɛnt lɔ dɛn we de dɔŋ ya:

·  Tεmprachכ kכntrכl : Sכr am na 5–25°C; avɔyd fɔ friz ɔ fɔ mek di san shayn dairekt wan.

·  Airtight storage : I nɔ mek di wata we de na di bɔdi nɔ kɔmɔt ɛn mek di skin nɔ de.

·  Rigyul agiteshɔn : Shek kɔntena dɛn wan wan tɛm fɔ avɔyd had sedimɛnt.

·  Fɔs-in, fɔs-ɔut : Strikli obshɔb shelf layf fɔ avɔyd west frɔm prɔdak dɛn we dɔn dɔn.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ, ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj — inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvayɔr bɛlt, ay-tɛmpracha fayv glas fabrics, ɛn mɔ — duya kɔntakt wi:

·  Savis Hotlayn :Mista. Guo: +86 18944819998 Mista Liu: +86 13705266308 Di wan dɛn we de wok fɔ di kɔmni

We wi de fala di savis filɔsofi fɔ profeshɔnal ɛn ɔnɛs, wi de gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis wit ɔl wi at!