Industrial Hot Pressing, Heat Sealing leh High-Temperature Operation dang atan PTFE High-Temperature Tape Thickness leh Specification dik tak thlan dan

Industrial hot pressing, heat sealing leh high-temperature process dang danga hman Jiangsu Aokai New Materials atanga PTFE high-temperature tape te tan chuan hmanrua efficiency leh product quality enfiah nan thlan dik a pawimawh hle. Thickness leh specification thlan hian operating temperature, pressure leh contact media hrang hrang hmanga physical leh chemical principle khauh tak tak a zawm a ni. A hnuaia tarlan te hi Aokai PTFE high-temperature tapes hman dan tak tak nena inzawm, thlan dan chipchiar tak a ni.

I. Operating Temperature atanga thlirin PTFE High-Temperature Tape thlang rawh

Operating temperature hian PTFE high-temperature tape substrate resistance grade leh service life chu direct-in a hril a ni.

· . 

200°C hnuai lam dinhmun tlangpui Economical pure PTFE high-temperature tape hi a tha tawk hle. A thuk zawng chu 0.08 mm–0.13 mm  a ni tur a ni. Chutiang tape te tak te chuan flexibility tha tak a pe a, roller emaw curved surface wrapping atan pawh a tha hle.

· . 

· . 

Medium-to-high temperature: 200°C–260°C Hei hi industrial heat-sealing hmanrua atana hnathawhna hmun hman tlanglawn ber a ni. Glass fiber-reinforced PTFE high-temperature tape  hman a ngai a, chu chuan temperature sang takah deformation a do thei a ni. thickness 0.18 mm  a tha a, a chhan chu tensile strength leh thermal conductivity inkara balance tha ber a neih theih avangin.

· . 

· . 

260°C aia sang boruak na tak , standard tape-a hun rei tak chhunga a resistance limit a pelh chuan high-grade reinforced PTFE tape a ngai a ni. Khua lum lutuk hnuaia structural integrity vawng reng turin thuk lo 0.25 mm aia  tura rawtna siam a ni.

· . 

II. Pressure hman dan atanga thlirin PTFE High-Temperature Tape thlang rawh

Working pressure hian tape mamawh mechanical strength leh wear resistance a tichiang a ni.

· . 

Light load leh precision fitting Low-pressure emaw complex-surface workpiece atan chuan tape thickness ≤ 0.13 mm hi  a tawk. An rit lo a, conformability tha tak an pe bawk.

· . 

· . 

Medium-to-high pressure leh wear resistance Hot press leh heat-sealing blade hnuaiah hian tape te hian compression leh friction chhunzawm zel an tuar thei a ni. Tape thickness 0.18 mm–0.25 mm  hi standard a ni. An high-density fiberglass base hian hnathawh laiin a chim leh a hrual loh nan a veng tha hle.

· . 

· . 

Heavy-duty high-pressure sealing High-pressure emaw gasket-type sealing hmanna atan chuan tape thickness ≥ 0.25 mm  hman tur a ni. Chutiang dense, thick tape chauh hian high-pressure fluid impact chu leakage awm lovin a tuar thei a ni.

· . 

III. Contact Media atanga thlirin PTFE High-Temperature Tape thlang rawh

Contact media-a chemical property hian adhesive type leh surface treatment a hril a ni.

· . 

Corrosive media chak tak Acid, alkalis emaw organic solvent chak tak awmna hmunah chuan non-adhesive pure PTFE tape hi  duhthusam a ni. Chemical inert a ni a, adhesive layer dissolution hlauhawmna a ti bo bawk.

· . 

· . 

Food-grade leh mild media Food packaging heat sealing emaw water-based adhesive application atan chuan silicone-backed PTFE tape hi  a awlsam ber. A install nghal vat a, food contact safety standard a zawm bawk.

· . 

· . 

Oil bawlhhlawh leh chhuahna hmun PTFE tape hian a pianphungah chuan surface energy a nei tlem hle. Oily condition-ah chuan residue te chu a nghet lo hle a, chu chuan tihfai leh enkawl chu a ti awlsam hle.

· . 

PTFE High-Temperature Tape siamna atana Step ngaa thlan dan

Industrial mamawh nena inmilna famkim neih theih nan:

1. Core temperature teh : Hnathawh chhunzawm zel laiin peak surface temperature hriat chian.

2. Pressure level endik : Heat-sealing blade emaw pressure rollers emaw hmanga pressure pek dan tehfung siam rawh.

3. Media hlauhawmna hriatchhuah : Chemical reagent-a hun rei tak a awm leh awm loh enfiah.

4. Thickness specification nemnghet : A chunga kan sawi ang hian thickness dik tak chu match rawh.

5. Installation dan dik tak : Self-adhesive (backing adhesive nei) emaw mechanically fixed (non-adhesive) tape emaw thlang rawh.

A chunga kan tarlan te hi Jiangsu Aokai New Materials Technology Co., Ltd.

Parameter chipchiar tak tak, application scenario leh kan product range pum puia customized solutions — PTFE high-temperature cloth, PTFE high-temperature tape, PTFE high-temperature mesh belt, bonding machine tan seamless belt, single-sided PTFE puan, high-temperature resistant conveyor belt leh high-temperature fiberglass cloth te pawh a tel — tan chuan contact hi lawmawm tak a ni keini:

·  Service Hotline:Mr. Guo +86 18944819998 Pu Liu +86 13705266308 biak theih a ni

Professional leh rintlak service philosophy kan vawng nung a, one-stop solution leh attentive service pe turin kan inpe a ni!