Aw fɔ Pik di Prɔpa Tiknɛs ɛn Spɛsifikeshɔn fɔ PTFE Ay-Tɛmpratura Tep fɔ Indastrial Hɔt Prɛsin, Ɔt Silin ɛn Ɔda Ay-Tɛmpratura Ɔpreshɔn dɛn

Fɔ PTFE ay-tɛmpracha tep frɔm Jiangsu Aokai Nyu Matirial we dɛn yuz insay industrial hot prɛsin, ɔt silin ɛn ɔda ay-tɛmpracha prɔses, di rayt sɛlɛkshɔn impɔtant fɔ mek shɔ se di ikwipmɛnt efyushɔn ɛn prodak kwaliti. Selekshɔn fɔ tik ɛn spɛsifikɛshɔn de fala strikt fizik ɛn kemikal prinsipul dɛn we de bays pan difrɛn ɔpreshɔn tɛmpracha, prɛshɔn ɛn kɔntakt midia. Dis dɔŋ ya na wan ditayl sɛlɛkshɔn gayd we dɛn jɔyn wit aktual aplikeshɔn sɛnɛriɔ dɛn fɔ Aokai PTFE ay-tɛmpracha tep dɛn.

I. Selekt PTFE Ay-Tɛmpratura Tep Bays pan Ɔpreshɔn Tɛmpratura

Opareshɔn tɛmpracha de ditarmin di sabstret rɛsistɛns gred ɛn savis layf fɔ PTFE ay-tɛmpracha tep dairekt wan.

· . 

Jɛnɛral kɔndishɔn dɛn we de dɔŋ 200°C Ikɔnomik pure PTFE ay-tɛmpracha tep na ful suitable. fכ tik 0.08 mm–0.13 mm .  i rεkomεnd Dɛn kayn tin tep dɛn ya kin mek dɛn ebul fɔ chenj fayn fayn wan, we fayn fɔ rap rɔla ɔ kɔba say.

· . 

· . 

Midul-to-hay tempɔret: 200°C–260°C Dis na di mɔs kɔmɔn wok rɛnj fɔ industrial ɔt-silin ikwipmɛnt. Glas fayba-riinfɔs PTFE ay-tɛmpracha tep  fɔ yuz fɔ rɛsist difɔmeshɔn na ay tɛmpracha. i rεkomεnd fכ tik 0.18 mm  , as i de ajɔst wan optimal bεlε bitwin tεnsil trεnk εn tεmכl kכnduktiviti.

· . 

· . 

Siviɔs ay-tɛmpracha ɛnvayrɔmɛnt dɛn we pas 260°C We tɛmpracha pas di lɔng tɛm rɛsistɛns limit fɔ standad tep dɛn, dɛn nid ay-grɛd riinfɔs PTFE tep. di tik we 0.25 mm כ pas dat  dεn sכgεst fכ mεnten strכkchכral integriti כnda ekstrim hεt.

· . 

II. Selekt PTFE Ay-Tɛmpratura Tep Bays pan Prɛshɔn we dɛn Aplay

Di prɛshɔn we dɛn de wok de sho di mɛkanikal trɛnk we dɛn nid ɛn di we aw di tep nɔ de west.

· . 

Layt lod ɛn prɛsishɔn fitin Fɔ lɔw-prɛshɔn ɔ kɔmpleks-sɔfays wokpies, tep dɛn we tik ≤ 0.13 mm  na infεkt. Dɛn layt ɛn dɛn de gi gud kɔnfɔmabiliti.

· . 

· . 

Midul-to-hay prɛshɔn ɛn wear resistans Ɔnda hot prɛs ɛn ɔt-silin bled, tep dɛn kin bia wit kɔntinyu kɔmpreshɔn ɛn frikshɔn. Tep dɛn we tik 0.18 mm–0.25 mm  na standad. Dɛn ay-densiti fayv glas bays kin rili mek dɛn nɔ fɔdɔm ɛn nɔ rɔtin we dɛn de wok.

· . 

· . 

Hevi-duti ay-prɛshɔn silin Fɔ ay-prɛshɔn ɔ gasket-tayp silin aplikeshɔn, ≥ 0.25 mm .  dɛn fɔ yuz tep dɛn we tik Na dɛn kayn dense, tik tep dɛn de nɔmɔ kin ebul fɔ bia wit ay prɛshɔn fluid impak we nɔ kin lik.

· . 

III. Selekt PTFE Ay-Tɛmpratura Tep Bays pan Kɔntakt Midia

Kεmikכl prכpati dεm fכ kכntakt midia de ditarεmin adhesive tכp εn surface tritmεnt.

· . 

Strɔng kɔrosiv midia Insay ɛnvayrɔmɛnt dɛn we gɛt strɔng asid, alkali ɔ ɔrganik sɔlvɛnt, dɛn kin lɛk fɔ yuz nɔ-adhesive pure PTFE tep  . I kεmikכl inεt εn i de εliminet di risk fכ adhesive layεr sכlushכn.

· . 

· . 

Fɔd-grɛd ɛn mild midia Fɔ it pak ɔt siling ɔ wata-based adhesive aplikeshɔn, silikon-bɛk PTFE tep  na in izi fɔ yuz. I kin instɔl kwik kwik wan ɛn i de fala di standad dɛn we sef fɔ kɔntakt it.

· . 

· . 

Oil-contaminated ɛn rilis ɛnvayrɔmɛnt PTFE tep inhɛrɛnt wan gɛt ekstrim lɔw sɔfayz ɛnaji. We ɔyl de, di tin dɛn we lɛf nɔ kin atɛnd, ɛn dis kin mek i rili izi fɔ klin ɛn mentenɛns.

· . 

Fayv-Step Selekshɔn Mɛtɔd fɔ PTFE Ay-Tɛmpratura Tep

Fɔ mek shɔ se dɛn mach pafɛkt wit di tin dɛn we di industrial nid:

1. Ditarmin di kor temperechur : Identify di pik surface temperechur durin kontinyu opareshon.

2. Evaluate pressure level : Asɛs di prɛshɔn we dɛn de yuz wit ɔt-silin bled ɔ prɛshɔn rɔla.

3. Identify media hazards : Chɛk fɔ lɔng tɛm we yu de ɛkspos to kemikal rijen.

4. Konfam tiknes spesifikeshɔn : Match di aprɔpriet tiknes bays pan di kɔndishɔn dɛn we de ɔp.

5. Verifay di we aw dɛn de instɔl am : Pik sɛlf-adhesive (wit bak adhesive) ɔ mɛkanikal fiks (nɔ-adhesive) tep.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl paramita, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj — inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha fayvglas klot — duya kɔntakt wi:

·  Savis Hotlayn:Mista. Guo +86 18944819998 Mista Liu +86 13705266308

Wi de sɔpɔt wan pɔshɔnal ɛn trɔst savis filɔsofi ɛn wi de dediket fɔ gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis!