Matla a Phahameng a Matla a PTFE Lesela la Mocheso o Phahameng oa Mocheso: Libaka tsa Kopo tsa 8 tsa Bohlokoa

Matla a phahameng PTFE lesela la mocheso o phahameng oa mocheso ke lisebelisoa tse sebetsang hantle tse entsoeng ka ho kenya kapa ho roala polytetrafluoroethylene (PTFE) holim'a lesela la fiberglass e phahameng ea tenacity. E rua matla a ikhethang a khalase ea fiberglass ha e ntse e kopanya thepa ea PTFE e phahameng: ho hanyetsa mocheso o pharaletseng (-70 ° C ho ea ho 260 ° C), sebaka se sa tsitsang, k'hemik'hale ea ho senya lik'hemik'hale, le ho kenya motlakase.

Motsoako ona o etsa hore e be sesebelisoa sa bohlokoa ho pholletsa le liindasteri tse fapaneng ka mokhoa o makatsang - ho tloha ho baka lijo ho isa sebakeng sa sefofane.

Aokai PTFE e etsa lesela la PTFE le matla a holimo ka botenya le li-weave tse fapaneng. Tataiso ena e akaretsa likarolo tse robeli tse kholo tsa ts'ebeliso, ho tloha ho li-membrane tsa liindasteri le tsa meralo ho isa ho PV lamination le anti-corrosion ea lik'hemik'hale.

Tsamaiso ea Liindasteri le Lipalangoang - The Core Application

Lesela la PTFE le matla a phahameng le entsoe ka mabanta a conveyor bakeng sa melapo ea tlhahiso e boima ho pholletsa le liindasteri tse ngata.

Ke hobane'ng ha matla a phahameng a le bohlokoa: Ka mabanta a maholo a tsamaisang thepa (ho fihla ho limithara tse 3-4), lesela le tlameha ho hanela ho otlolla le ho boloka tsitsipano ka bophara bo feletseng. Matla a phahameng a fiberglass a fana ka botsitso bona.

Tšireletso ea Welding le Mocheso oa Tiiso

Lesela la PTFE le nang le matla a phahameng le sebelisoa haholo e le thepa ea ho itšehla thajana e sa keneleng mocheso, e se nang thupa tlas'a mocheso o phahameng, maemo a phahameng a khatello ea mocheso.

1. Likoahelo tsa Heat sealer le ho lokolla li-liner

• E sebelisoa e le mochini o kenyang mocheso le ho lokolla liner ka har'a metjhini e phahameng-frequency, ultrasonic, le hot plate welding - e thibela ho khomarela pakeng tsa li-workpieces le lipoleiti tse futhumatsang.

• E koaheloa ka likhoele tse tiisang mocheso ho lelefatsa bophelo ba ts'ebeletso ea lisebelisoa le ho netefatsa likarolo tse koalang hantle.

2. Tšireletso ea mollo oa welding

• E hlophisitsoe ka likharetene tse sireletsang le li-tarpaulins khahlano le spatter ea welding.

• Matla a matla a phahameng a fana ka khanyetso e ntle ea ho lla le bophelo bo bolelele ba ts'ebeletso - leha e le mabenkeleng a maphathaphathe a ho etsa lintho.

Demolding le Hot Press Ho theha

Thepa e ntle ea PTFE e sa thupeng le khatello e phahameng ea khatello e etsa hore e be thepa e loketseng ea tokollo.

Motlakase oa Motlakase - Sehlopha sa H se Lekanyelitsoe

Lesela la PTFE le matla a phahameng le khetholloa e le lisebelisoa tsa ho kenya letsoho tsa Sehlopha sa H (mocheso oa tšebeletso o tsoelang pele oa 180 ° C, o nang le bokhoni ba nakoana bo phahameng haholo).

• Ho kenya motlakase le transformer: Ho phuthela ha slot, karohano ea mekhahlelo, le ho phuthela ha likhoele.

• Ho phuthela lithapo: Ho phuthela likarolo tsa likhoele tsa mocheso o phahameng lits'ebetsong tsa indasteri le tsa sefofane.

• Lisebelisoa tsa ho futhumatsa motlakase: Li-gaskets tsa insulation le lithibelo tsa mocheso.

Thepa ea bohlokoa: Matla a phahameng a dielectric, matla a tlase a dielectric (2.0-2.1), le botsitso bo botle ba mocheso.

Mehaho ea Membrane ea Meralo - Mabala a Lipapali le Maemafofane

Tšimo ena e sebelisa ka botlalo tšobotsi ea matla a holimo a lesela la PTFE.

• Lisebelisoa tsa ka ho sa feleng tsa marulelo bakeng sa mehaho e meholo ea sechaba - mabala a lipapali, lifofane, litsi tsa lipontšo.

• E entsoe ka thepa ea membrane ea PTFE e tsitsitsoeng ka:

  • Matla a phahameng haholo - a nka sebaka se selelele ntle le tšepe ea sebopeho.

  • Boima bo bobebe - bo fokotsa mojaro oa mohaho.

  • Bokhoni ba ho itlhoekisa - pula e hlatsoa lerōle.

  • Ho fetisa leseli - ho hasanya leseli la tlhaho.

  • Bophelo ba tšebeletso - ho feta lilemo tse 30.

Merero e ikhethang: Lebala la Lipapali la Beijing (Lebala la ka hare la Nonyana ea Nest), Lebala la Lipapali la Shanghai, le liteishene tse ngata tsa boema-fofane tsa machaba.

Lik'hemik'hale tse Anti-Corrosion le Manonyeletso a Katoloso

Ho sebelisa PTFE e ikhethang inertness lik'hemik'hale, phahameng-matla PTFE lesela e etswa ka dikgokelo tenyetsehang le compensators.

• Likarolo tsa ho atolosa tse se nang tšepe (li-compensator) bakeng sa liphaephe tsa lik'hemik'hale - li monya katoloso ea mocheso le ho fokotseha, ho hanyetsa li-acid tse matla le alkalis.

• Likhokahano tse tiisitsoeng tse feto-fetohang le li-anti-corrosion cladding bakeng sa litanka tsa polokelo le liketlele tse arabelang.

• Li-duct liners tsa flue gas desulfurization system ho feme ea motlakase.

Hobaneng ha matla a phahameng e le a bohlokoa: Manonyeletso a atolositsoeng a ba le potoloho ea khatello le ho sisinyeha. Lesela le tlameha ho boloka botšepehi ba lona tlas'a ho feto-fetoha khafetsa le khatello ea ka hare.

Aerospace le Liindasteri tsa Sesole - Maemo a Feteletseng

Lesela le phahameng la PTFE le sebetsa tlas'a maemo a thata ka ho fetisisa a ho sebetsa.

• Likobo tse sireletsang mocheso bakeng sa lienjine tsa lifofane le lifofa-sebakeng.

• Likoahelo tse sireletsang le li-cable sheaths - tse bobebe, tse thibelang mocheso le tse sa cheng.

• Lithapo tsa 'metso tse thibelang ho ntša metsi le lisebelisoa tse sireletsang mocheso bakeng sa limisaele le lirokete.

Thepa ea bohlokoa: Karo-karolelano e phahameng ea matla ho boima, 260°C e sa khaotseng ho hanyetsa mocheso, le ho se sebetse ha lik'hemik'hale.

Lisebelisoa tse ling tse khethehileng

Lesela la PTFE le matla a phahameng le boetse le sebetsa lits'ebetsong tse hlahang le tse ikhethang:

Kakaretso - Thepa ea Khetho bakeng sa Tikoloho e Batlang

Matla a phahameng a PTFE lesela la mocheso o phahameng ke hoo e batlang e le khetho e nepahetseng bakeng sa libaka tsa mosebetsi tse hlokang motsoako oa:

• Matla a phahameng a matla le ho hanyetsa ho lla

• Ho hanyetsa mocheso (ho fihlela ho 260°C ho tsoela pele, 300°C+ tlhoro)

• Sebaka se se nang thupa, se hlwekileng ha bonolo

• Ho hanyetsa ho bola ha lik'hemik'hale

• Tšireletso ea motlakase

• Bophelo bo bolelele ba tšebeletso (membrane ea meralo ea lilemo tse 30+)

Aokai PTFE e etsa lesela la PTFE le matla a holimo le nang le botenya bo ikhethileng, boima ba 'mele, le litlhaloso tsa ho loha ho tsamaisana le ts'ebeliso ea hau e ikhethileng. Ho tloha ho 0.08mm ea limaraka tse bobebe ho isa ho liphetolelo tse boima ba 0.40mm, re na le sehlahisoa se nepahetseng.

Ikopanye le rona ho buisana ka kopo ea hau - re ka khothaletsa boemo bo nepahetseng mme ra fana ka disampole bakeng sa tlhahlobo.

Litaba tse ka holimo li fanoe ke Jiangsu Aokai New Materials Technology Co., Ltd.

Haeba u lakatsa ho ithuta ho eketsehileng ka litlhaloso tse qaqileng, maemo a kopo le tharollo e hlophisitsoeng bakeng sa lihlahisoa tsa rona tse feletseng, ho akarelletsa le masela a PTFE a mocheso o phahameng, litheipi tsa PTFE, mabanta a conveyor a PTFE, mabanta a seamless a tlamang, lesela le nang le lehlakore le le leng la PTFE, lesela le nang le mocheso o phahameng oa mocheso, lesela le sa keneleng mocheso o phahameng. rona:

• Mong. Guo: +86 18944819998

• Mong. Liu: +86 13705266308

Re lula re ts'ehetsa filosofi ea botsebi le bots'epehi, 'me re ikemiselitse ho u fa tharollo ea sebaka se le seng le lits'ebeletso tse nahanang.