High-Strength PTFE High-Temperature Fabric: 8 Nneɛma atitiriw a Wɔde Di Dwuma

Ahoɔden a ɛkorɔn PTFE ntama a ɛyɛ hyew kɛse yɛ ade a wɔde afrafra a ɛyɛ adwuma yiye a wɔde polytetrafluoroethylene (PTFE) a wɔde hyɛ mu anaasɛ wɔde kata fiberglass ntama a ɛyɛ den kɛse so. Ɛnya ahoɔden a ɛda nsow a ɛtwetwe fiberglass bere a ɛka PTFE su a ɛkorɔn no bom: ɔhyew a ɛtrɛw (-70°C kosi 260°C), nea ɛnkyere so, nnuru a ɛko tia nsɛe, ne anyinam ahoɔden a ɛbɔ ho ban.

Saa nkabom yi ma ɛyɛ ade a ɛho hia wɔ nnwuma ahorow a ɛtrɛw a ɛyɛ nwonwa mu – efi aduan a wɔtow so kosi ahunmu.

Aokai PTFE yɛ PTFE ntama a ahoɔden kɛse wom a ne kɛse ne ne nwene ahorow. Saa akwankyerɛ yi fa nneɛma atitiriw awotwe a wɔde di dwuma ho, efi mfiridwuma mu nneɛma a wɔde fa nneɛma ne adansi mu ntini so kosi PV lamination ne nnuru a ɛko tia nsɛe so.

Industrial Conveying ne Transport – Nea Wɔde Di Dwuma Titiriw

Wɔyɛ PTFE ntama a ahoɔden kɛse wom ma ɛyɛ conveyor belts ma nneɛma a wɔyɛ a ɛyɛ den wɔ nnwuma pii mu.

Nea enti a ahoɔden a ɛkorɔn ho hia: Wɔ conveyor belts a ɛtrɛw (ɛkɔ mita 3-4) mu no, ɛsɛ sɛ ntama no gyina ntrɛwmu ano na ɛkɔ so yɛ den wɔ ne tɛtrɛtɛ nyinaa mu. Fiberglass a ahoɔden wom kɛse na ɛma saa ahoɔden yi gyina pintinn.

Welding ne Ɔhyew Nsɔano Ahobammɔ

Wɔde PTFE ntama a ahoɔden kɛse wom di dwuma kɛse sɛ ade a ɛko tia ɔhyew, a ɛnyɛ nea ɛbata ho a wɔde yi nneɛma fi afoforo ho wɔ ɔhyew a ɛkorɔn, nhyɛso kɛse welding tebea horow mu.

1. Ɔhyew sealer kataso ne gyae liners

• Wɔde di dwuma sɛ ɔhyew insulation ne release liner wɔ high-frequency, ultrasonic, ne ɔhyew mprɛte welding mfiri – siw adhesion ntam workpieces ne ɔhyew mprɛte.

• Wɔakata so wɔ heat sealer sealing strips so de atrɛw mfiri service nkwa nna mu na ama awerɛhyem sɛ sealing anoano yɛ mmerɛw.

2. Welding ogya ahobammɔ

• Wɔyɛɛ no ​​ntama a ɛbɔ ho ban ne tarpaulins a ɛko tia welding sptter.

• Ahoɔden a ɛkorɔn a ɛtwetwe no ma nusu a ɛko tia yiye ne ɔsom nkwa nna tenten – mpo wɔ sotɔɔ ahorow a wɔyɛ nneɛma a adagyew nnim mu.

Demolding ne Hot Press a Wɔyɛ

PTFE a ɛkyɛn so a ɛnyɛ nea ɛbata ho ne nhyɛso a ɛkorɔn a ɛko tia no ma ɛyɛ ade a eye a wɔde gyae.

Electrical Insulation – Adesua H Rated

Wɔakyekyɛ PTFE ntama a ahoɔden kɛse wom no mu sɛ Class H insulation material (180°C kɔ so som ɔhyew, a bere tiaa mu tumi a ɛkorɔn kɛse).

• Motor ne transformer insulation: Slot insulation, phase mpaapaemu, ne coil wrapping.

• Cable insulation: Wrapping layers ma nhama a ɛyɛ hyew kɛse wɔ mfiridwuma ne ahunmu dwumadie mu.

• Mfiri a ɛma anyinam ahoɔden yɛ hyew: Nneɛma a wɔde siw mframa ano ne nneɛma a wɔde siw ɔhyew ano.

Nneɛma atitiriw: Dielectric ahoɔden a ɛkorɔn, dielectric constant a ɛba fam (2.0-2.1), ne ɔhyew a ɛyɛ den yiye.

Architectural Membrane Structures – Agumadibea ne Wimhyɛn Gyinabea

Saa afuw yi de ahoɔden a ɛkorɔn su a ɛwɔ PTFE ntama mu no di dwuma koraa.

• Nneɛma a wɔde si dan atifi a ɛtra hɔ daa ma ɔmanfo adan akɛse – agumadibea ahorow, wimhyɛn gyinabea ahorow, mmeae a wɔde nneɛma kyerɛ.

• Fabricated mu tensioned PTFE membrane nneɛma a:

  • Ultra-high tensile ahoɔden – spans akwansin akɛse a enni structural dade.

  • Nneɛma a emu yɛ hare – ɛtew ɔdan adesoa so.

  • Tumi a ɔde tew ne ho – osu hohoro mfutuma.

  • Hann a ɛkɔ – ɛtrɛw abɔde mu hann mu.

  • Ɔsom nkwa nna – bɛboro mfeɛ aduasa.

Nnwuma a ɛyɛ nwonwa: Beijing Ɔman Agumadibea (Bird’s Nest mu ntini), Shanghai Agumadibea, ne amanaman ntam wimhyɛn gyinabea ahorow pii.

Nnuru a Ɛko Tia Nkwammoaa ne Ntrɛwmu

Wɔde PTFE nnuru a ɛnyɛ adwuma soronko no di dwuma, na wɔyɛ PTFE ntama a ahoɔden kɛse wom ma ɛyɛ nkitahodi a ɛyɛ mmerɛw ne nea wɔde tua ka.

• Ntrɛwmu nkwaa a ɛnyɛ dade (compensators) ma nnuru a wɔde fa nsu mu – ɛtwetwe ɔhyew ntrɛwmu ne nea ɛtwetwe, ɛko tia acid ne alkalis a ano yɛ den.

• Nkitahodi a ɛyɛ mmerɛw a wɔde hyɛ mu ne nea ɛko tia nsɛe a wɔde kata so ma nneɛma a wɔkora so tank ne reaction kettles.

• Duct liners a wɔde yɛ flue gas desulfurization nhyehyɛe ahorow wɔ anyinam ahoɔden mfiri ahorow mu.

Nea enti a ahoɔden a ɛkorɔn ho hia: Nkwaa a ɛtrɛw no nya nhyɛso kyinhyia ne kankyee. Ɛsɛ sɛ ntama no kura ne mudi mu kura wɔ bere a wɔbɔ no mpɛn pii ne nhyɛso a ɛwɔ mu no ase.

Ahunmu ne Asraafo Nnwuma – Tebea a Ɛyɛ Den

PTFE ntama a ahoɔden kɛse wom yɛ adwuma wɔ adwumayɛ tebea horow a ɛyɛ den sen biara mu.

• Ntama a wɔde siw ɔhyew ano a wɔde yɛ wimhyɛn engine ne ahunmu ahyɛn.

• Akatasoɔ a ɛbɔ ho ban ne nhama a wɔde akata so – emu yɛ hare, ɛtumi gyina ɔhyew ano, na ɛnyɛ ogya.

• Menewa mu nneɛma a ɛko tia ablation ne nneɛma a ɛbɔ ɔhyew ho ban ma aprɛm ne rɔke.

Nneɛma atitiriw: Ahoɔden ne mu duru a ɛkɔ soro, ɔhyew a ɛkɔ so ko tia 260°C, ne nnuru a ɛnyɛ adwuma.

Dwumadi Titiriw Afoforo

PTFE ntama a ahoɔden kɛse wom nso som wɔ nnwuma a ɛreba ne nea ɛyɛ soronko mu:

Nsɛm a Wɔaboaboa Ano – Nneɛma a Wɔpaw ma Nneɛma a Atwa Yɛn Ho Ahyia a Ɛhwehwɛ Nneɛma a Atwa Yɛn Ho Ahyia

Ɛkame ayɛ sɛ ntama a ahoɔden kɛse wom a ɛyɛ PTFE a ɛyɛ hyew kɛse no yɛ nea eye sen biara a wɔpaw ma adwumayɛbea ahorow a ɛhwehwɛ sɛ wɔde nneɛma a wɔaka abom:

• Ahoɔden a ɛkorɔn a ɛma ɛtwetwe ne nea ɛko tia tetew

• Ɔhyew a ɛko tia (ɛkɔ 260°C kɔ so, 300°C+ ne sorokɔ) .

• Ɛnyɛ nea ɛbata ho, ɛnyɛ den sɛ wobɛtew so

• Nnuru a ɛko tia nsɛe

• Ɛlektrik a wɔde siw anyinam ahoɔden ano

• Nkwa nna tenten (architectural membranes mfe 30+) .

Aokai PTFE yɛ PTFE ntama a ahoɔden kɛse wom a ne kɛse yɛ nea wɔahyɛ da ayɛ, ne mu duru, ne nwene ho nkyerɛkyerɛmu a ɛne wo dwumadie pɔtee no hyia. Efi 0.08mm lightweight grades so kosi 0.40mm heavy-duty versions so no, yɛwɔ ade a ɛfata.

Di yɛn ho nkɔmmɔ na yɛne wo nsusuw wo akwammisa krataa no ho – yebetumi akamfo abasobɔde a eye sen biara akyerɛ na yɛde nhwɛsode ahorow ama de asɔ ahwɛ.

Atifi hɔ nsɛm no yɛ nea wɔde ama Jiangsu Aokai Nneɛma Foforo Mfiridwuma Co., Ltd.

Sɛ wopɛ sɛ wusua pii fa nsɛm a ɛkɔ akyiri, dwumadie tebea ne ano aduru a wɔayɛ ama yɛn nneɛma nyinaa ho a, a PTFE ntama a ɛyɛ hyew a ɛkorɔn, PTFE teapɔn a ɛyɛ hyew kɛse, PTFE mesh conveyor belts, seamless bonding machine belts, PTFE ntama a ɛwɔ afã biako, conveyor belts a ɛko tia ɔhyew a ɛkorɔn ne ɔhyew a ɛkorɔn ka ho fiberglass ntama, yɛsrɛ sɛ wo ne yɛn nni nkitaho:

• Owura Guo: +86 18944819998

• Owura Liu: +86 13705266308 akyerɛw

Yɛkura nyansapɛ a ɛfa adwumayɛ ne nokwaredi ho bere nyinaa, na yɛasi yɛn bo sɛ yɛde ano aduru a ɛwɔ baabi biako ne nnwuma a wosusuw ho bɛma wo.