Ku kuma Swiyimo swo Tlula & Matirhelo Lama nga Heriki
Muendli wa wena wo Tshembeka wa PTFE Film Tape

U Hatlisisa Ntirho: Vuandlalo lebyi nga Namarheli, Matirhelo yo Hatlisa

U Engetela Nkoka: Matlhari Lamatsongo, Vuyelo Bya Le Henhla

KOMBELA XITLHOKOVETSELO

Kaya » Swikumiwa » PTFE Thepi yo Namarhela » Thepi ya Filimi ya PTFE » Thepi ya Filimi ya PTFE

thepi ya filimi ya PTFE leyi nga kongomisiwangiki

Thepi ya Filimi ya PTFE

PTFE Film Tape yitlhela yivuriwa ptfe film adhesive tape, kukatsa na tinxaka leti kongomisaka na letinga kongomisiwiki.

1.Non-ku namarhela PTFE ku peta;
2.Secure na ku tshembheka silicone namarhela;
3.Wide mahiselo ku lwisana na ku suka eka -54°C(-65°) ku ya eka 260°C(500°C);
4.Ku kufumela ka le hansi;
5.Easy ku tirhisa, vutomi byo leha bya vutirheli;
6.Specially eka swikongomelo swo pfalela na ku pfalela;
7.Switifikheti: ISO 9001:2015, FDA & UL;
8.Excellent vukorhokeri & nseketelo ku katsa na pre-sales, in-sales & after-sales;
9.Amukela ku customize;
10.OEM / vukorhokeri bya OBM.


Ku kumeka ka swona:



Vutisa

ptfe thepi ya filimi ptfe filimi ya thepi yo namarhela thepi ya filimi ya PTFE leyi nga kongomisiwangiki PTFE Thepi yo Namarhela Thepi yo namarhela ya teflon ya PTFE

Xiyenge xa Swikumiwa

Nhlamuselo ya Xiendliwa

Hi vaendli va xiphurofexinali va PTFE Film Tape na vaphakeri eChina, ku xava kumbe ku xavisa thepi yo namarhela ya filimi ya ptfe hi xitalo ku suka efemeni ya hina. Ku kuma xikombiso xa mahala, . tihlanganise na hina sweswi ku kuma customized.

PTFE Film Tape yi endliwe hi pure Teflon (Teflon) turning film tani hi base material, endzhaku ka vutshunguri byo hlawuleka eka tlhelo rin’we, tlhelo rin’we ra xinamarheti. Hi swivumbeko swo hlawuleka leswi heleleke, yi nyika swintshuxo swa xiyimo xa le henhla swa swilo eka vanjhiniyara na vaendli va swifaniso eka ntirho wa ku tirhisiwa. Thepi leyi sweswi i thepi leyi tirhaka swinene ya matirhelo yale henhla yo hisa, ti khemikhali na ku hlangana na ku hlangana.

Xingheniso xa swikumiwa

PTFE Film Tape i polytetrafluoroethylene (PTFE) film-based tape, xivumbeko xin’we lexi tshunguriweke hi silicone adhesive, leyi nyikaka ku tiya ka mahiselo yo anama kusuka eka -54°C(-65°C) kuya eka 260°C(500°C). PTFE Film Tape yi katsa thepi ya filimi leyi humesiweke ya PTFE na thepi ya filimi leyi humesiweke ya PTFE.

PTFE extruded film tape yina xivumbeko lexinga namarheli naswona xinga tshovekiki, leswi endlaka leswaku yiva xisirhelelo xo hatlisa xo humesiwa exikarhi ka swimunhuhatwa laha ntshikelelo na mahiselo swi cincaka.

PTFE extru

Swihlawulekisi swa Thepi ya Filimi ya PTFE

1, ku tiya ka ku hisa loku

2, ku susa swivati: vuandlalo bya kona bya rhetela, a swi olovi ku namarhela eka nchumu wihi na wihi. Swi olova ku basisa tinxaka hinkwato ta swivati swa mafurha, swivati kumbe swin’wana leswi khomanisiweke eka vuandlalo bya yona; Paste, resin, pende na kwalomu ka swilo hinkwaswo leswi namarhelaka swinga susiwa ntsena;

3, ku lwisana lokukulu ka tikhemikhali: ku lwisana ka tikhemikhali ku antswa swinene ku tlula tinsimbi to tala ta risima.

4, ku tiya ka gezi: tinxaka hinkwato ta mahiselo na ku kufumela swivumbeko swa dielectric swi tshamisekile swinene.

5, na matirhelo ya le henhla ya insulab7d34e1741e8176=5, na matirhelo ya le henhla ya insulation, anti-ultraviolet, anti-static.

6, ku kufumela ka le hansi.

7, ku olova ku tirhisa, vutomi byo leha bya vutirheli.

Ku tirhisiwa ka thepi ya filimi ya PTFE

1. Eka swakudya na mirhi plastiki ku paka indasitiri ku hisa ku pfalela ku tsema muchini na rivilo lerikulu ku hisa ku pfalela muchini.

2. Tinxaka hinkwato ta dryer drying cylinder surface anti-stick vutshunguri;

3. Vutshunguri byo lwisana na ku namarhela ehenhla ka silindara yo omisa ya laminator;

4. Anti-stick vutshunguri bya guide roller na press roller ehenhla;

5. Muchini wa maphepha wo omisa silindara ehenhla ka vutshunguri bya anti-stick;

6. Tinxaka tin’wana ta workpiece surface anti-adhesive, anti-stick muvala, hunguta ku tirhisiwa ka friction.

ptfe thepi ya filimi ptfe filimi ya thepi yo namarhela PTFE Thepi yo Namarhela

ta Xithekiniki ta Thepi ya Fi PTFElm ya Tipharamitha

Landzana	Nomboro ya Xiphemu	Muhlovo	Ku hi ku angarhela tiya (mm) .	Ku anama ka ntolovelo (mm) .	Lapi ra le hansi Ndzilo wa gram (g/ ㎡) .	Ku tiya ka ku tsana (N/25mm) .	~!phoenix_var168_0!~ ~!phoenix_var168_1!~ ~!phoenix_var168_2!~	ya ku tshoveka Voltage (Kv) .	Antistatic Xikombo xa
M	M006H	Mpunga	0.06	300	120	60	5	8	-
	M006BK	Ntima	0.06	300	120	60	5	-	ya DSC na Ndlela ya FTIR)
	M008H	Mpunga	0.08	300	150	90	6	10	-
	M008BK	Ntima	0.08	300	150	90	6	-	ya DSC na Ndlela ya FTIR)
	M013H	Mpunga	0.13	420	260	160	8	15	-
	M013BK	Ntima	0.13	420	260	160	8	-	ya DSC na Ndlela ya FTIR)
	M013W	Basa	0.13	600	260	160	8	15	-
	M018H	Mpunga	0.18	600	350	250	9	18	-
	M018BK	Ntima	0.18	600	350	250	9	18	ya DSC na Ndlela ya FTIR)

Ntirhisano & Ndhavuko

Muendli wa Thepi ya Tifilimi ya PTFE

Aokai PTFE yi kongomisa eka ku nyika lapi ra xiyimo xa le henhla ra PTFE leri pfanganisiweke na fiberglass na swiyimo swa vukorhokeri bya kahle swinene. Hi vaendli va malapi ya fiberglass leyi pfanganisiweke na PTFE ya xiphurofexinali lava nga ta ku pfuna eka tindhawu leti landzelaka: switirhisiwa swa xisekelo, khwalithi ya swikumiwa leswi hetiweke, ku rhumeriwa, na vukorhokeri bya le ndzhaku ka ku xavisiwa. Aokai yi ku nyika wholesale, customization, design, ku paka, swintshuxo swa indasitiri, na vukorhokeri byin’wana bya OEM OBM. Xipano xa hina xa R&D xa xiphurofexinali, ntlawa wa vuhumelerisi, ntlawa wo kambela khwalithi, ntlawa wa vukorhokeri bya xithekiniki, na ntlawa wa vukorhokeri bya le mahlweni ka ku xavisiwa & endzhaku ka ku xavisiwa swi ta ku nyika vukorhokeri bya xiyimo xin’we, swi hlayisa nkarhi wa wena na ku tiyisisa khwalithi ya swikumiwa swa xiphurofexinali swinene.

Xana u nga xava kwihi PTFE Fi lm Tape?

Xiviko xa REACH xa Thepi yo Namarhela ya PFTE

PTFE Thepi yo Namarhela ROHS Xiviko

Loko u ri na swivutiso mayelana na PTFE F ilm Tape , ptfe film adhesive tape , hi kombela u nga kanakani ku hi tihlanganisa eka mandy@akptfe.com .hi kombela u nga kanakani ku hi tihlanganisa eka

Ku kuma swivutiso kumbe ku endla oda, hi kombela tihlanganise na hina.

Q Xana ndzi nga oda ku anama kumbe ku leha ka ntolovelo?

A Ina. Hi nyika ku anama ka ntolovelo, ku tiya, na ku leha ka roll ku fambisana na endlelo ra wena. Tihlanganisi na ntlawa wa hina wo xavisa hi swihlawulekisi swa wena na n
Q Xana ndzi fanele ku yi hlayisa na ku yi khoma njhani thepi?

A Hlayisa eka ndzhawu yo kufumela, yo oma ekule na dyambu ro kongoma na swihlovo swo hisa. Papalata ku tshama nkarhi wo leha eka ndzhongho. Hlayisa roll eka xipaci xa yona xosungula loko yinga tirhisiwi.
Q Hi wihi nkarhi wo rhangela lowu tolovelekeke?

Swikumiwa swa Standard swi rhumeriwa ku nga si hela masiku ya 7 ya ntirho endzhaku ka ku tiyisisiwa ka oda; swihlawulekisi swa ntolovelo swi nga ha teka nkarhi wo leha. Hi ta tiyisisa nkarhi wo rhangela lowu tiyeke na wena hi ku oda.
Q Xana xinamarheti xi sekeriwe eka silicone, acrylic, silicone-acetate?

A Xinamarheti lexi xi sekeriwe eka silicone, hambiswiritano, muxavi a nga endla thepi leyi sekeriweke eka acrylic hi ku landza swilaveko swa yena, leyi nyikaka ku namarhela ka le henhla.
Q Hi kwihi ku hambana exikarhi ka PTFE silicone adhesive tape na PTFE acrylic tape?

A
Ku tirha ka mahiselo

● Xinamarheti xa silicone:

Kutshamiseka kahle swinene eka mahiselo yale henhla naswona switshama swirikarhi swi olova eka mahiselo yale hansi; swi lulamerile eka ku rhendzeleka ka mahiselo na ti gaskets/seals.

● Xinamarheti xa acrylic:

Ku tirha kahle ka mahiselo hinkwawo kambe hi xitalo aswi olova kufana na silicone; yingava brittle swinene eka mahiselo yale hansi swinene kutani yi olova eka mahiselo yale henhla.

Ku lwisana na tikhemikhali na mbango

● Xinamarheti xa silicone:

Ku lwisana kahle swinene na ndzhongho, ku nyuperisiwa ematini, ku hlangana na UV (leswaku swi tirhisiwa ehandle), na tikhemikhali to tala; yi hlayisa ku olova.

● Xinamarheti xa acrylic:

Ku tiya ka kahle ka tikhemikhali na UV eka tindzhawu totala kambe hi ntolovelo aswi olova ku tlula silicone; ku lwisana na maxelo swiya hi formulation.

Ku cinca-cinca vs ku tiya

● Xinamarheti xa silicone eka PTFE:

Ku olova swinene, ku kota ku amukela ku famba-famba, ku rhurhumela, na ku andzisiwa ka mahiselo handle ko lahlekeriwa hi xisirhelelo.

● Xinamarheti xa acrylic eka PTFE:

Hi ntolovelo swi tiya; ku khoma loku tiyeke ko sungula kambe ku nga rivaleli ngopfu hi ku famba-famba; swi antswa eka ti bond leti tiyeke, ta high-tack.

Swikumiwa leswi Fambelanaka na swona

Thepi yo tshwuka ya PTFE

Thepi yo basa ya PTFE

Swihloko leswi fambisanaka na swona

[PTFE Thepi yo Namarhela ] Xana u nga tiyisisa njhani leswaku organic silicone adhesive yi fikelela degree ya curing leyi kongomisiweke hi ku fambisana na rivilo ra layini ya muchini wo peta na ku leha ka oven eka thepi ya PTFE ya mahiselo yale henhla?

Xihloko lexi xi katsa ndlela yo fambisana na rivilo ra layini ya muchini wo peta na ku leha ka oven ku tiyisisa leswaku xinamarheti xa organosilicone xi fikelela mpimo wa ku horisa lowu kongomisiweke eka thepi ya PTFE ya mahiselo ya le henhla. Nsinya wa nawu wo fambelanisa wa nkoka: nkarhi hinkwawo wo tshama t_total = ku leha ka oveni loku tirhaka L ÷ rivilo ra layini v a ri fanelanga ku va ehansi ka nkarhi wa le hansi lowu lavekaka wo horisa. Kuma swihlawulekisi swa ku horisa hi ku tirhisa DSC kumbe swikambelo swa ku horisa hi ku namarhela leswi simekaka vuxaka bya 'temperature — minimum cure time'. Modele wa ku horisa loku ringanaka loku hlengeletiweke: avanyisa oveni hi tizoni, hlayela ti=Li/v na tcure(Ti), tiyisisa ∑(ti/tcure(Ti)) ≥1. Maendlelo ya xibalo: veka tindzhawu ta mahiselo letingana ku leha ka Li na mahiselo ya Ti; veka rivilo ra layini v, hlayela nkarhi wo tshama wa zoni yin’wana na yin’wana na mpimo wa ku hoxa xandla; iterate kufikela eka total ≥1 (safety margin 1.1-1.2 ya hlohleteriwa).
[PTFE Thepi yo Namarhela ] Ku hambana eka Vuyelo bya Infrared Radiation Heating na Hot Air Cirulation Heating Curing Maendlelo eka ku fana ka Xivumbeko xa Cross-Linked xa Ti Organosilicon Adhesive Layers

Xihloko lexi xi pimanisa ku hambana exikarhi ka ku hisa ka miseve ya infrared na tindlela to horisa ku hisa ka ku rhendzeleka ka moya wo hisa eka ku fana ka xivumbeko xa crosslinked xa swiphemu swo namarhela swa silicone. Maendlelo yo hundzisela kuhisa: moya wo hisa wutitshege hi convection-conduction na ku tlakuka ka mahiselo yo olova, ku hambana kutsongo ka mahiselo yale ndzeni/ehandle; IR yina vuenti byo nghena lebyi nga nyawuriki na ku amukeriwa lokukulu ka le henhla (makhume kuya eka madzana ya ti micrometers) leswi endlaka leswaku kuva na steep surface-to-interior gradient. Vuyelo eka kufana ka crosslink: moya wo hisa wu endla leswaku kuva na synchronous curing endzeni nale handle na crosslink density leyi fanaka; IR yi endla leswaku surface layer yi hatlisa yi endla dense 'skin film' leyi sivelaka ku fambisiwa ka kuhisa na ku famba ka chain yale ndzeni, leswi endlaka leswaku crosslink density yihunguteka kusuka ehenhla kuya endzeni.
$Hi kwihi ku yelana ka nhlayo exikarhi ka gel fraction index ya swinamarheti leswi twaka ntshikelelo wa silicone na matimba yo hlangana ya leyara ya namarheta?$

[PTFE Thepi yo Namarhela ] Hi kwihi ku yelana ka nhlayo exikarhi ka gel fraction index ya swinamarheti leswi twaka ntshikelelo wa silicone na matimba yo hlangana ya leyara ya namarheta?

Xihloko lexi xi katsa ku yelana ka nhlayo exikarhi ka xiphemu xa gel na matimba yo hlangana eka swinamarheti leswi twaka ntshikelelo wa silicone swa thepi ya Teflon. Xiphemu xa gel = tiphesente ta vukulu bya crosslinked network leyi nga nyawuriki eka toluene (Soxhlet extraction, 24hr). Matimba yo hlangana lawa ya tivekaka hi matimba yo khoma ya mahiselo yale henhla (180°C, 1kg). Ti range tinharhu: ehansi ka critical point (<60%) — ku hava percolating network, ku khoma matimba ekusuhi na zero; practical range (60-85%) — matimba yo hlangana ya kula hi xihatla na xiphemu xa gel, 60%→70% yi tlakusa nkarhi wo khoma kusuka eka timinete kuya eka tiawara, 70%→80% yinyika ku tlakuka ka 3-10x; high crosslinking (>85%) — gains slow (85%→95% ntsena 20-50% yi tlakuka), tack yi hunguteka swinene, >95% yi lahlekeriwa hi swivumbeko swa PSA.
[PTFE Thepi yo Namarhela ] Xana mahiselo ya ku bola na hafu ya vutomi bya ti peroxide crosslinking agents swifanele ku fambelanisiwa njhani na fasitere ra maendlelo yo horisa ya Teflon tape?

Xihloko lexi xi katsa ndlela yo fambelanisa mahiselo ya ku bola na hafu ya vutomi bya ti peroxide crosslinking agents (BPO na DCP) na fasitere ra PO na DCP) na fasitere ra maendlelo yo horisa ya Teflon tape. Data ya nkoka: BPO — 1-min hafu ya vutomi eka ~131°C, 1-hr eka ~92°C, 10-hr eka ~72°C; DCP — 1-min eka ~171°C, 1-hr eka ~135°C, 10-hr eka ~115°C. Logic yo fambelanisa: xinamarheti xi lava 97-99% wa crosslinking = 5-7 wa hafu ya vutomi; nkarhi wo horisa = 5-7 × hafu ya vutomi eka mahiselo lawa ya kongomisiweke. Hlayela endzhaku mahiselo kusuka eka nkarhi wo tshama eka layini ya vuhumelerisi kumbe back-calculate nkarhi kusuka eka mahiselo yale henhla lawa ya pfumeleriwaka.
[PTFE Thepi yo Namarhela ] Hi swihi ku hambana eka vuyelo bya ku hisa ka miseve ya infrared ku hambana na ku hisa ka ku rhendzeleka ka moya wo hisa eka ku fana ka xivumbeko xa crosslinked xa leyara yo namarhela ya silicone?

Xihloko lexi xi pimanisa ku hambana exikarhi ka ku hisa ka miseve ya infrared na ku hisa ka ku rhendzeleka ka moya wo hisa eka crosslinked structure uniformity ya silicone adhesive layer. Maendlelo yo hundzisela kuhisa: moya wo hisa i convection-conduction, wo olova naswona wuya emahlweni, leswi endlaka leswaku kuva na gradient ya mahiselo yoringanela; IR i radiation-absorption na ku amukeriwa lokukulu ka le henhla (micrometers kuya eka millimeters) leswi endlaka leswaku kuva na steep surface-to-interior gradient. Vuyelo eka ku hangalasiwa ka crosslink density: moya wo hisa wu pfumelela swiphemu swale ndzeni nale handle ku nghena eka vulcanization temperature range kwalomu ka nkarhi wun’we, leswi humesaka uniform crosslink density kuya hi vukulu; IR yi endla leswaku surface layer yi horisa hiku hatlisa yi endla nhlonge yo enta leyi sivelaka ku hundziseriwa ka kuhisa, leswi endlaka leswaku kuva na sharp gradient ya crosslink density leyi hungutaka kusuka ehenhla kuya endzeni.

1
2
3
4
...
34
»

Nhlayo hinkwayo ya matluka ya 34 Yana eka Tluka
Famba

Thepi ya Filimi ya PTFE

Xiyenge xa Swikumiwa

Xingheniso xa swikumiwa

Swihlawulekisi swa Thepi ya Filimi ya PTFE

Ku tirhisiwa ka thepi ya filimi ya PTFE

ta Xithekiniki ta Thepi ya Fi PTFElm ya Tipharamitha

Ntirhisano & Ndhavuko

Muendli wa Thepi ya Tifilimi ya PTFE

Xana u nga xava kwihi PTFE Fi lm Tape?

Q Xana ndzi nga oda ku anama kumbe ku leha ka ntolovelo?

Q Xana ndzi fanele ku yi hlayisa na ku yi khoma njhani thepi?

Q Hi wihi nkarhi wo rhangela lowu tolovelekeke?

Q Xana xinamarheti xi sekeriwe eka silicone, acrylic, silicone-acetate?

Q Hi kwihi ku hambana exikarhi ka PTFE silicone adhesive tape na PTFE acrylic tape?

Swikumiwa leswi Fambelanaka na swona

Swihloko leswi fambisanaka na swona

XITLHOKOVETSELO XA XITLHANsa PTFE Film Adhesive Tape

XIYENGE XA SWITSHURIWA

Thepi ya Filimi ya PTFE

Xiyenge xa ​​Swikumiwa

Xingheniso xa swikumiwa

Swihlawulekisi swa Thepi ya Filimi ya PTFE

Ku tirhisiwa ka thepi ya filimi ya PTFE

ta Xithekiniki ta Thepi ya Fi PTFElm ya Tipharamitha

Ntirhisano & Ndhavuko

Muendli wa Thepi ya Tifilimi ya PTFE

Xana u nga xava kwihi PTFE Fi lm Tape?

Q Xana ndzi nga oda ku anama kumbe ku leha ka ntolovelo?

Q Xana ndzi fanele ku yi hlayisa na ku yi khoma njhani thepi?

Q Hi wihi nkarhi wo rhangela lowu tolovelekeke?

Q Xana xinamarheti xi sekeriwe eka silicone, acrylic, silicone-acetate?

Q Hi kwihi ku hambana exikarhi ka PTFE silicone adhesive tape na PTFE acrylic tape?

Swikumiwa leswi Fambelanaka na swona

Swihloko leswi fambisanaka na swona

XITLHOKOVETSELO XA XITLHANsa PTFE Film Adhesive Tape

XIYENGE XA SWITSHURIWA

Xiyenge xa Swikumiwa