Ntama a Wɔtaa De Di Dwuma wɔ Membrane Structures mu: PVC, PVDF, ne nea ɛkeka ho.

Aokai New Materials, a ɛyɛ PTFE (Teflon) nneɛma a ɛyɛ fibea no yɛ PTFE membrane nneɛma. Nneɛma foforɔ a wɔtaa de yɛ membrane structure adansiɛ mu bi ne PVC, PVDF, ETFE, ne nea ɛkeka ho Saa anan yi yɛ nneɛma titire a wɔde yɛ membrane structures. Ɛwom sɛ wɔtaa frɛ wɔn 'membrane materials' deɛ, nanso ɛsono wɔn titire wɔ nneɛma a wɔahyehyɛ, ɔsom nkwa nna, wɔn ankasa ahotew adwumayɛ, hann a ɛkɔ, ogya a ɛko tia ne tebea a ɛfata mu.

Wɔ nsɛm a ɛnyɛ den mu no, wobetumi ate wɔn abusuabɔ ase sɛnea edidi so yi:PVC ne mfitiase nkyerɛase;PVDF yɛ ade a wɔayɛ no foforo a wɔde kata so ma PVC;PTFE yɛ ntama a ɛyɛ adwuma yiye a ɛtra hɔ kyɛ;bere a ETFE nyɛ ntama koraa, na mmom sini a ɛda adi.

1. PVC (Polyvinyl Chloride) a wɔde yɛ nneɛma .

Ɛyɛ ade a ɛho nhia na wɔde di dwuma kɛse wɔ membrane structures mu. Ɛtaa de polyester nhama ntama di dwuma sɛ ade a wɔde gyina so, na wɔde polyvinyl chloride akata so.

·  Ɔsom nkwa nna : Ɛyɛ tiaa, mpɛn pii no ɛyɛ mfe 10–15.

·  Adwumayɛ a wɔde siesie wɔn ho : Ɛnyɛ papa. Ɛnyɛ den sɛ PVC twetwe mfutuma, mfe ne kɔkɔɔ wɔ ultraviolet mframa ase, na ebetumi mpo ahu amane wɔ 'plasticizer migration' (sticky surface).

·  Ogya a ɛko tia : Mpɛn pii no Class B1 (ogya ntumi nhyew) anaa Class B2.

·  Bo : Ɛho ka sua.

2. PVDF (Polyvinylidene Fluoride) a ɛwɔ nipadua no mu.

Sɛ yɛbɛka no katee a, PVDF nyɛ ade a ɛde ne ho a wɔde gyina so, na mmom ɛyɛ mfiridwuma a wɔde kata PVC membranes so wɔ soro. Wɔnam laminating anaa coating a layer of PVDF resin a egyina polyester fiber ntama + PVC coating so na ɛyɛ.

·  Ɔsom nkwa nna : Mfinimfini, mpɛn pii no mfe 15–25.

·  Adwumayɛ a ɛma obi ho tew ne ho : Ɛyɛ papa. PVDF wɔ ahoɔden a ɛba fam koraa wɔ soro, na ɛma ɛyɛ den sɛ mfutuma ne efĩ bɛbata ho; osutɔ nsu a wɔde hohoro no dɔɔso ma ahotew. Eyi ne mfaso titiriw a ɛwɔ so sen PVC a ɛyɛ mpapahwekwa.

·  Adwumayɛ : UV a ɛyɛ den kɛse a ɛko tia ne nea ɛko tia onyin adwumayɛ sen PVC a ɛyɛ mpapahwekwa.

·  Bo : Ɛyɛ mmerɛw, ɛboro PVC so kakra.

3. PTFE (Polytetrafluoroethylene, a wɔtaa frɛ no Teflon) .

Ɛyɛ ade a ɛyɛ membrane a ɛkorɔn a ɛtra hɔ kyɛ. Ɛde fiberglass a ahoɔden wom kɛse di dwuma sɛ ade a wɔde gyina so, a wɔde PTFE resin akata so.

·  Ɔsom nkwa nna : Ɛware yiye, mpɛn pii no ɛboro mfe 30, wɔ nsusuwii mu no ɛkɔ mfe 50, a ɛne adan som nkwa nna hyia.

·  Adwumayɛ a ɛma obi ho tew ne ho : Ɛyɛ papa. PTFE wɔ soro friction coefficient a ɛba fam koraa na ɛkame ayɛ sɛ ɛnyɛ nea ɛbata mfutuma ho.

·  Ogya a ɛko tia : Class A (ɛnyɛ nea ɛhyew). Esiane sɛ fiberglass yɛ ade a wɔde gyina so nti, ɛwɔ ogya a ɛko tia a ɛkorɔn sen biara wɔ nneɛma anan no mu.

·  Hann a ɛkɔ : Eye (bɛyɛ 10%–15%), ɛma hann a ɛtrɛw a ɛyɛ mmerɛw a sunsuma nni mu.

·  Nnuru a ɛgyina pintinn : Ɛntumi gyina acid ne alkali ano, ɛtumi nsɛe, na ɛkame ayɛ sɛ wim tebea a emu yɛ den nnya so nkɛntɛnsoɔ.

·  Mfomso : Ɛyɛ den kakra na entumi nkɔtow anaasɛ wɔbobɔw kɛse te sɛ PVC; nhyehyɛe a ɛkorɔn a wɔhwehwɛ wɔ akwantu ne nneɛma a wɔde si hɔ ho; mpɛn pii no, wɔde fitaa nkutoo na ɛwɔ hɔ; na ne bo yɛ den.

4. ETFE (Ethylene Tetrafluoroethylene Copolymer) a ɛwɔ nipadua no mu.

ETFE yɛ soronko koraa wɔ abiɛsa a atwam no ho. Ɛnyɛ 'ntama' (ntama/coating composite), na mmom ɛyɛ sini a ɛyɛ den a ɛda adi pefee. 'Nsuo Kube' a agye din no yɛ ETFE membrane nhyehyeɛ ananmusifoɔ adwuma.

·  Ɔkwan a wɔfa so yɛ : Ɛnyɛ sɛ wɔde ntama a wɔde kata so na ɛyɛ, na mmom wɔde sini a wɔayi afi mu (a mpɛn pii no ne kɛse yɛ microns 200–300), a wɔtaa de di dwuma sɛ mframa a wɔde hyɛ mu (apɔw-mu-teɛteɛ a wɔde mframa gu mu).

·  Mu duru : Ɛyɛ hare yiye, bɛyɛ 1% pɛ na ahwehwɛ a ɛwɔ beae koro no ara mu duru.

·  Hann a ɛkɔ : Ɛkorɔn yiye, wotumi sesa (mpɛn pii no 20%–95%), ɛma ɛkame ayɛ sɛ ɛyɛ nea ɛda adi pefee anaasɛ ɛyɛ sunsuma a wɔatintim.

·  Self-cleaning adwumayɛ : Very smooth soro a ahoɔden anti-fouling tumi.

·  Ductility : Ahoɔden pa a ɛtwetwe ne nea ɛyɛ den; sɛ wɔtow mpo a, ɛrentetew na ɛrentrɛw te sɛ atetesɛm mu nneɛma a wɔde yɛ membrane no.

·  Mfomso : Ɛhwehwɛ sɛ ɛkɔ so ma nneɛma bo kɔ soro na ama ne nsusuwii akɔ so ayɛ (mframa a wɔde hyɛ mu no su), ɛma ɛka a wɔbɔ wɔ nneɛma a ɛkɔ soro ho nnwinnade ne ahoɔden a wɔde di dwuma ho no kɔ soro; ntini a ɛwɔ ɔfa biako no nni ɔhyew a ɛmma mframa nkɔ mu yiye, na mpɛn pii no ɛhwehwɛ sɛ wɔde mframa a wɔde hyɛ mu a ɛwɔ ntoatoaso pii.

Adwumayɛ ho Nsɛm a Wɔaboaboa Ano

Nsɛm a ɛwɔ atifi hɔ no yɛ nea Jiangsu Aokai New Materials Technology Co., Ltd. na ɛde mae.

Sɛ wopɛ parameters a ɛkɔ akyiri, application scenarios ne customized ano aduru a yɛn full-range products, a Teflon high-temperature ntama, Teflon high-temperature tape, Teflon high-temperature mesh belts, seamless belts ma bonding mfiri, biako-afã PTFE ntama, high-temperature resistant conveyor belts, high-temperature resistant fiberglass ntama, ka ho. ne nea ɛkeka ho, yɛsrɛ sɛ fa:

·  Ɔsom Ntrɛwmu: Owura Guo 18944819998

·  Owura Liu 13705266308 ɔkyerɛwee

Yɛkura adwumayɛfoɔ ne nokwaredi ɔsom nyansapɛ mu, na yɛatu yɛn ho ama sɛ yɛbɛma wo ano aduru a ɛkɔ baabiara ne ɔsom a wɔde aso tie!