Jiangsu Aokai New Materials, fibea a ɛyɛ PTFE a wɔde fiberglass ntama adura ho, de wo kɔ sua PTFE a wɔde fiberglass ntama adura ho. Ɛyɛ ade a wɔabom ayɛ a wɔde fiberglass ntama ayɛ sɛ nnyinaso ade a wɔde Polytetrafluoroethylene (PTFE) akata so, a wɔde di dwuma kɛse wɔ ɔhyew a ɛkɔ soro a ɛko tia ne nea ɛnkyere so a wɔde fa nneɛma mu. Wɔ dwuma a mfaso wɔ so mu no, mpɛn pii no, ɛho hia sɛ wɔde ntama a wɔde fiberglass adura ho a wɔde PTFE akata so bom sɛnea nnwinnade no kɛse te. Nneɛma ahorow a wɔde ka bom no nya ntama a wɔde fiberglass a wɔde akata so a wɔde PTFE akata so no pintinn, ɛyɛ petee ne ɔsom nkwa so nkɛntɛnso tẽẽ. Nea edidi so yi yɛ ntotoho a ɛkɔ akyiri a ɛfa akwan atitiriw pii a wɔfa so ka nneɛma bom ne nsonsonoe a ɛwɔ wɔn pintinn mu ho.

I. Honam fam Nkitahodi Nneɛma a Wɔde Yɛ PTFE Coated Fiberglass Fabric

Wɔ heavy-adwuma anaa ahoɔhare kɛse adwumayɛ tebea horow a PTFE coated fiberglass ntama, honam fam nkitahodi ne nea wɔpɛ.

·  Steel buckle joint : Fa mfiri ka PTFE coated fiberglass ntama no ano abien no nyinaa ne dade dade buckles. Saa kwan yi ma nkwaa no yɛ adwuma yiye kɛse (ɛbɛn sɛnea mfitiase ntama no ahoɔden te), nanso nkwaa no nyɛ pɛ na ebetumi asɛe ntama a wɔde fiberglass a wɔde PTFE akata so no anoano.

·  Loop joint (soft joint) : Di kan yɛ ring structures wɔ PTFE coated fiberglass ntama ano abien no nyinaa na fa pin shafts bata ho. Saa kwan yi hwɛ hu sɛ ntama a wɔde fiberglass a wɔde PTFE akata so no yɛ torotoro na nsonsonoe biara nni mu, ahoɔden a ɛtwetwe no kɛse, na ɛnyɛ den sɛ wɔbɛpaapae mu na wɔahohoro ho.

II. Hot Melt Bonding Nneɛma a Wɔde Yɛ PTFE Coated Fiberglass Ntama

Hot melt bonding ka nhama a ɛwɔ PTFE a wɔde akata fiberglass ntama so no bom denam melting so, a ɛyɛ den yiye.

·  Ultrasonic welding : Fa high-frequency vibration ma ɔhyew denam friction ntam molecules a PTFE coated fiberglass ntama ma fusion. Ahoɔden a ɛwɔ ntama a wɔde PTFE akata so a wɔayɛ ho adwuma no betumi adu bɛboro 90% wɔ mfitiase ntama no mu, na ɛma ɛyɛ akwan a ɛyɛ den sen biara a wɔfa so ka bom mprempren no mu biako, a gluu nsɛe no.

·  Hot melt splicing : Nwene fiberglass/PTFE nhama a ɛwɔ PTFE a wɔde fiberglass ntama adura ho no wɔ ɔhyew a ɛkorɔn a ɛyɛ 280-320°C. Saa kwan yi ma nkwaa a ɛyɛ torotoro na nnuru ntumi nsɛe no ma ntama a wɔde fiberglass a wɔde PTFE akata so, nanso ehia nnwinnade titiriw.

·  Dade a wɔde mia : Hot press PTFE a wɔde fiberglass ntama akata so a dade a ɛyɛ hyew kɛse wɔ bɛyɛ 390°C a wɔde F46 adhesive film aka ho. Saa kwan yi yɛ nea ɛyɛ mmerɛw na ɛfata ma PTFE a wɔde fiberglass ntama a wɔde akata so no siesie ntɛmntɛm wɔ beae hɔ, nanso sɛnea ɛbɛyɛ den no gyina adwumayɛ mu osuahu so.

III. Adhesive Bonding Nneɛma a Wɔde Yɛ PTFE Coated Fiberglass Ntama

Adhesive bonding kwan no fata ma PTFE coated fiberglass ntama a ɛkorɔn flatness ahwehwɛde ne hare adesoa.

·  Lapping kwan (overlapping hot pressing) : Fa PTFE a wɔde akata fiberglass ntama no ano abien no nyinaa so 5-10cm, na fa PTFE adhesive film sa no yare denam ɔhyew a wɔde mia so. Optimed overlapping hot pressing betumi ama nkwaa ahoɔden a PTFE coated fiberglass ntama akɔ soro 30%-50%, nanso overlapping fã no yɛ kakra thicker.

·  Butt joint kwan : Fa PTFE coated fiberglass ntama no ano abien no nyinaa hyia na fa adhesive bond wɔ mfinimfini wɔ ɔhyew ase. Saa kwan yi ma nkwaa yɛ mmerɛw yiye, nanso sɛnea ɛyɛ den no sua koraa na ɛnyɛ den sɛ wobɛpaapae afi ano.

·  Thinned lapping : Thin nkwaa a ɛwɔ PTFE coated fiberglass ntama no ano abien no nyinaa kan na afei lap na bond. Saa kwan yi hwɛ hu sɛ ahoɔden a ɛkorɔn bere a ɛma PTFE a wɔde akata fiberglass ntama nkwaa so no yɛ tratraa yiye sen lapping a ɛyɛ daa no, nanso adwumayɛ no yɛ den.

IV. General Tips a ɛbɛma Joining Firmness a PTFE Coated Fiberglass Fabric no ayɛ kɛse

Ɛmfa ho ɔkwan a wɔfa so ka ntama a wɔde PTFE akata so no bom wɔ atifi hɔ no, nneɛma a edidi so yi betumi ama ahotoso atu mpɔn:

·  Nkwaa mu ahoɔden : Paste 10-15cm trɛw PTFE ahoɔden teapɔn wɔ afã abien no nyinaa nkwaa no akyi ɔhyew press splicing PTFE coated fiberglass ntama.

·  Embedded reinforcing core : Fa fiberglass asaawa anaa Kevlar nhama hyɛ PTFE a wɔde fiberglass ntama a wɔde akata so no nkwaa mu na amma atetew.

·  45° bevel cutting : Twitwa PTFE coated fiberglass ntama no ano abien no nyinaa mu 45° bevels ansa na woaka ho na woakwati adwennwen a ɛbɛba.

Nsɛm a ɛwɔ atifi hɔ no yɛ nea Jiangsu Aokai New Material Technology Co., Ltd. na ɛde mae.

Sɛ wopɛ sɛ wusua pii fa parameters a ɛkɔ akyiri, application scenarios ne customized ano aduru a ɛyɛ nneɛma ahorow nyinaa te sɛ PTFE coated fiberglass ntama, PTFE high-temperature tape, PTFE high-temperature mesh belt, seamless belt for laminating machine, single-sided PTFE ntama, high-temperature resistant conveyor belt, high-temperature resistant fiberglass ntama, yɛsrɛ sɛ fa akwan a edidi so yi so di yɛn ho nkɔmmɔ:

·  Frɛ ɔsom telefon so telefon so: Owura Guo 18944819998

·  Owura Liu 13705266308 ɔkyerɛwee

Yɛkura adwumayɛfoɔ ne nokwaredi som adwene no akyi bere nyinaa, na yɛde yɛn koma nyinaa ma wo ano aduru a ɛwɔ baabi biako ne ɔsom a wɔde aso di dwuma!