Wetin na di jɔyn prɔses fɔ PTFE kɔt fayv glas fabrik?

Jiangsu Aokai Nyu Matirial, we na wan sɔs manifakta fɔ PTFE kɔt fayv glas klos, de kɛr yu fɔ lan bɔt PTFE kɔt fayv glas klos. Na kɔmpɔzit matirial we dɛn mek wit fayv glas klos as di bays matirial we dɛn kɔt wit Polytetrafluoroethylene (PTFE), we dɛn kin yuz bɔku bɔku wan na ay-tɛmpracha rɛsistɛns ɛn nɔ-stik kɔnvayɔr bɛlt. We dɛn de yuz am fayn fayn wan, bɔku tɛm dɛn nid fɔ jɔyn di fayv glas klos we dɛn kɔt wit PTFE akɔdin to di dimɛnshɔn dɛn we di ikwipmɛnt gɛt. Difrɛn jɔyn prɔses dɛn kin afɛkt di fayn fayn wan, flatnɛs ɛn savis layf fɔ PTFE kɔt fayvglas fabrik dairekt wan. Di tin we de kam biɛn ya na ditayl kɔmpiashɔn fɔ sɔm men we dɛn fɔ jɔyn ɛn di difrɛns dɛn we dɛn gɛt fɔ mek dɛn tinap tranga wan.

I. Fizik Kɔnɛkshɔn Prɔses fɔ PTFE Kɔt Fayba Glas Fabrik

Fɔ ebi-diuti ɔ ay-spid ɔpreshɔn sɛnɛriɔ fɔ PTFE kɔt fayv glas fabrik, fizik kɔnɛkshɔn na di tin we dɛn kin pik.

·  Stiɛl bɔkul jɔyn : Mɛkanikal bayt ɔl tu di ɛnd dɛn pan PTFE kɔt fayv glas fabrik wit mɛtal stɛl bɔkul. Dis prɔses de ajɔst di jɔyn efyushɔn we rili ay (klos to di trɛnk we di ɔrijinal klos gɛt), bɔt di jɔyn nɔ ivin ɛn i kin pwɛl di ed dɛn fɔ di fayv glas klos we dɛn kɔt wit PTFE.

·  Lup jɔyn (sɔft jɔyn) : Pri-fabrik ring strɔkchɔ dɛn na ɔl tu di ɛnd dɛn pan PTFE kɔt fayv glas fabrik ɛn kɔnɛkt wit pin shaft dɛn. Dis we ya de mek shɔ se PTFE kɔt fayv glas fabrik gɛt smol ɛn gap-fri sɔfays, ay tɛnsiɛl trɛnk, ɛn izi fɔ disassembly ɛn klin.

II. Hot Melt Bonding Proses fɔ PTFE Kɔt Fayba Glas Fabrik

Hot melt bonding de kɔnɛkt di fayv dɛn na PTFE kɔt fayv glas fabrik bay we i de mɛlt, wit fayn fayn fayn fayn tin dɛn.

·  Ultrasonic welding : Yuz ay-frikyuɛnsi vaybreshɔn fɔ jenarayz ɔt tru frikshɔn bitwin mɔlyul dɛn fɔ PTFE kɔt fayv glas fabrik fɔ fushɔn. Di jɔyn trɛnk fɔ trit PTFE kɔt fayv glas fabrik kin rich pas 90% pan di ɔrijinal fabrik, we de mek i bi wan pan di mɔs fayn jɔyn we dɛn de naw, we nɔ gɛt glu pɔyushɔn.

·  Hot melt splicing : Melt di fayv glas/PTFE fayba dɛm fɔ PTFE kɔt fayv glas fabrik na ay tɛmpracha we na 280-320°C. Dis prɔses de prodyuz smol ɛn kemikal kɔrɛshɔn-rɛsistant jɔyn fɔ PTFE kɔt fayv glas fabrik, bɔt i nid spɛshal ikwipmɛnt.

·  Ayɔn prɛs : Ɔt prɛs PTFE kɔt fayv glas fabrik wit ay-tɛmpracha ayɛn we de lɛk 390°C we dɛn jɔyn wit F46 adhesive film. Dis we ya na fleksibul ɛn fayn fɔ on-sayt kwik ripɛnt fɔ PTFE kɔt fayv glas fabrik, bɔt di fayn fayn wan dipen pan ɔpreshɔn ɛkspiriɛns.

III. Adhesive Bonding Proses fɔ PTFE Kɔt Fayba Glas Fabrik

Di adhesive bonding we fit fɔ PTFE kɔt fayv glas fabrik wit ay flatnɛs rikwaymɛnt ɛn layt lod.

·  Lapping method (overlapping hot pressing) : Ovalap ɔl tu di ɛnd dɛm fɔ PTFE kɔt fayv glas fabrik bay 5-10cm, ɛn mɛn bay hot prɛs wit PTFE adhesive film. Di optimized ovalapin hot presin kin inkrisayz di joyn strכng fכ PTFE koted fayba glas fabrik bay 30%-50%, bכt di ovalapin pat tik sכmtεm.

·  Bɔt jɔyn we : Align ɔl tu di ɛnd dɛn fɔ PTFE kɔt fayv glas fabrik ɛn bon wit adeziv na di midul ɔnda ɔt. Dis we ya de mek wan jɔyn we rili smol, bɔt di we aw i strɔng nɔ kin rili strɔng ɛn i kin izi fɔ krak frɔm di ed.

·  Thined lapping : Tin di joyn dεm na di tu εnd dεm na di PTFE koted fiberglass fabric fכs εn afta dat lap εn bond. Dis prɔses de mek shɔ se i gɛt ay trɛnk we i de gi bɛtɛ flatnɛs fɔ PTFE kɔt fayvglas fabrik jɔyn dɛn pas ɔdinari lap, bɔt di ɔpreshɔn na kɔmpleks.

IV. Jɛnɛral Tips fɔ Ɛnjɔy di Jɔyn Famnɛs fɔ PTFE Kɔt Fayba Glas Fabrik

I nɔ mata us jɔyn we fɔ PTFE kɔt fayv glas fabrik dɛn adopt ɔp, dɛn tin ya we de dɔŋ ya kin mek dɛn rili abop pan am:

·  Jɔyn riinfɔsmɛnt : Past 10-15cm waid PTFE riinfɔsmɛnt tep na ɔl tu di say dɛn na di jɔyn afta yu dɔn ɔt prɛs splays pan PTFE kɔt fayvglas fabrik.

·  Embedded reinforcing core : Embed fayv glas trɛd ɔ Kevlar fayba insay di jɔyn fɔ PTFE kɔt fayv glas fabrik fɔ mek i nɔ te.

·  45° bevel cutting : Kɔt ɔl tu di ɛnd dɛm fɔ PTFE kɔt fayv glas fabrik insay 45° bevel bifo yu jɔyn fɔ avɔyd strɛs kɔnsɛntreshɔn.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan mɔ bɔt di ditayl paramita dɛn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wan ful rɛnj ɔf prɔdak dɛn lɛk PTFE kɔt fayv glas fabrik, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ lamin mashin, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt, ay-tɛmpracha rɛsistant fayv glas klos, duya kɔntakt wi tru dɛn we ya:

·  Kɔl di savis hotlayn: Mista Guo 18944819998

·  Mista Liu 13705266308 ɔda pipul dɛn

Wi de ɔltɛm sɔpɔt di prɔfɛshɔnal ɛn ɔnɛs savis kɔnsɛpt, ɛn wit ɔl wi at fɔ gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis!