Fiberglass Warp & Weft Density bɛ nɔ bila cogo min na PTFE ka finiw ka funteni caman na

Ni a bɛ sugandili kɛ PTFE high-temperature cloth , sannikɛlaw fanba bɛ u sinsin a bonya ni a dacogo ɲuman kan. Nka dogolen bɛ PTFE layini jukɔrɔ, paramɛtiri kɔrɔlen dɔ bɛ yen: warp ni weft density . fibreglasi substrat ka

Density bɛ a ɲɛfɔ cogo min na jiriw bɛ pake siri. A bɛ nɔ bila fɛn bɛɛ la – a sɔgɔli fanga, ɲɛjibɔbaliya, finimugu nɔrɔli, a sɛgɛsɛgɛli, ani a sanfɛla nɔgɔya. A ka bon kojugu, wa fini bɛ gɛlɛya ni ɲɛjibɔ fanga man ɲi. A lafiyalen don kojugu, ani pinɛw bɛ se ka bɔ ni u hakɛ sabatili barikama ye.

Aokai PTFE ye fibreglasi densities ɲumanw kɛ sɛnɛko boli ba caman kɔnɔ. Nin gafe in bɛ a ɲɛfɔ cogo min na density bɛ nɔ bila fɛn kolomaw la ani k’aw dɛmɛ ka balansi ɲuman sugandi aw ka baarakɛcogo la.

Mekaniki fanga & Dimensionnel sabatili

1. Tensile (Tensile) fanga

Kɔlɔsili nafama: Ni aw bɛ baara minnu kɛ minnu bɛ girinya camanba de wajibiya (misali la, fɛnɲɛnamafagalanw janyalenw tensionba kɔrɔ), aw bɛ aw jija ka density moyenne fo ka se a danma ma. Nka aw bɛ aw yɛrɛ tanga densɛri jugumanba ma, o min bɛ kɛ sababu ye ka sɛgɛn joona doni fangamaw kɔrɔ.

2. Ɲɛjibɔ fanga – U-Curve inversée (U-Curve inversé).

Ɲɛjibɔ fanga ye taamasiɲɛ ye min ka gɛlɛn kosɛbɛ, min bɛ nɔ bila denso la. PTFE dacogo kɔfɛ, polimɛri resin bɛ jiriw tigɛlenw datugu u nɔ na. Jɛɲɔgɔnya bɛ tugu U cogo la kurukuru inversé dɔ kɔ :

Key takeaway: Ɲɛjibɔ fanga min ka bon kosɛbɛ, o bɛ sɔrɔ density moderate , a tɛ density highest. Tuma caman na, o bɛ kɛ fɛn ye min bɛ ɲɔgɔn sɔsɔ.

Aokai PTFE bɛ fibreglasi substrates dilan ni densités (dansi) kɔlɔsili tigitigi ye. Ni ɲɛjibɔ ka gɛlɛn (misali la, fɛnɲɛnamafagalanw bɛ kɛ jirisunw kan minnu bɛ jɔ tuma caman), an bɛ a fɔ ko u ka density moyenne (a ka c’a la 18-20 labanw/cm) walasa ka ɲɛjibɔ kunbɛn ka caya.

3. Dimensionnel Stability & Anti-Warp baarakɛcogo

Ladilikan : Ni aw bɛ baara kɛ ni funteni caman ye, minnu bɛ a ɲini ka hakɛ tigitigiw kɛ (misali la, funteni-datugulan gaziw, lamini-minɛnw), aw bɛ fɛnw sugandi minnu bɛ bɛn ɲɔgɔn ma, minnu ka dɔgɔn fo ka se hakɛ danma ma.

Coating Penetration, Adhesion & Surface Karamɔgɔya

1. Perméabilité & Mecanique Ankɔri fanga

Jagokɛcogo: Ni density dɔgɔyalen don, o bɛ tɛmɛsira caman de wajibiya walasa ka da wulilenw fa (n’o tɛ, pinɛw bɛ bɔ). Density high-density mago bɛ dipping parameters optimisés la walasa ka don dafalen sɔrɔ.

2. Surface Smoothness & Non-Stick baarakɛcogo

3. Ka Voltage & Pinhole Ratio muɲu

Basi fini min ka bon, o bɛ ni pores finmanw ye, minnu bɛ kɛ kelen ye, o bɛ a ɲini ka finimugu finmanw de wajibiya walasa ka se ka yɔrɔ sɔrɔ min tɛ pinɛw ye – o bɛ a to dielektriki tiɲɛni fanga bɛ se ka da a kan.

A kɛcogo kɔrɔ : Kuranko la, substrat min ka bon kosɛbɛ, o de ka fisa.

Flexibilité & Dynamique Sɛgɛn kunbɛnni

Failure mechanism for high-density under flexing: Ni a bɛ segin-ka-bɔ, o bɛ kɛ sababu ye ka sɔgɔsɔgɔninjɛ ni bɔli juguman kɛ jiriw tigɛyɔrɔw la, o bɛ na ni finimugu karilen ye ani ka basigi fini kari.

Ladilikan: Fɛn minnu bɛ baara kɛ teliyaba la min bɛ to senna (misali la, fɛnɲɛnamafagalan minnu bɛ wuli ka bɔ jirisun misɛnninw kan, sigilan fangama), u ka fisa ni density moyenne walima low ye.

Sugandili kuncɛlen – Density sugandicogo

Sariya sanulama: Aw kana tugu fiyentɔya la ka tugu densité maksimali kɔ. Density optimal bɛ sira di PTFE doncogo bɛrɛ ma ka sɔrɔ ka ɲɛjibɔ kunbɛnni, a sɛgɛsɛgɛli, ani a sanfɛla tiɲɛni balansi. Ka kɛɲɛ ni izini baarakɛcogo caman ye, density moyenne (18-22 ends/cm) bɛ baara kɛcogo ɲuman di yɔrɔ bɛɛ la.

In summary , warp and weft density of fibreglass fabric ye paramɛtiri kɔrɔlen ye nka a ka teli ka ye ka ban PTFE fini funteniman na. Density (dansi) min ka bon, o bɛ dɔ fara a sɔgɔli fanga kan, a sanfɛla nɔgɔyali kan, ani a bɛ dɔ fara dielektriki baarakɛcogo kan, nka a bɛ dɔ bɔ ɲɛjibɔ fanga la (a dancɛ ɲuman kɔfɛ), a bɛ se ka fɛn caman sɛgɛsɛgɛ, ani a bɛ dɔ bɔ finimugu doncogo la. Density dɔgɔyali bɛ flexibilité, flex fatigue ɲɛnamaya, ani coating nɔrɔli ɲɛ, nka a bɛ se ka pinholes to rougher surface finish.

O kun ye balansi ye. Ni aw bɛ ɲɛjibɔ kɛ ani ka baara kɛ ni fanga ye, aw bɛ density moyenne sugandi (18-22 labanw/cm). Ni ultra-smooth non-stick ani kuran insulation, density caman bɛ se ka kɛ jo ye. Walasa ka nɔrɔli ni kɔrɔta muɲu kosɛbɛ, density dɔgɔman fo ka se a danma ma, o de bɛ baara kɛ ka ɲɛ.

Aw mago bɛ dɛmɛ na walasa ka fibre de verre densité ɲuman sugandi aw ka PTFE fini kɛcogo la wa? Aokai PTFE bɛ substrates customized dilan ka tɛmɛn warp/weft densities suguya caman kan. Aw ye anw sɔrɔ ni aw ka masinw ni dugukolo finiko wajibiyalenw ye.

Tekniki kɔnɔkow minnu bɛ di Jiangsu Aokai Kura Materiel Teknoloji Co., Ltd.

Ni aw mago bɛ fɛn ɲɛfɔlenw na, baarakɛcogo ɲɛminɛni, ani furaw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye fɛn bɛɛ lajɛlen na i n’a fɔ PTFE fini min bɛ funteni caman bɔ, PTFE kasɛti nɔrɔlen, PTFE cɛsirilan min bɛ kɛ ni nɛgɛ ye, fuser cɛsirilan min tɛ sɔgɔ, PTFE fini min datugulen don fan kelen fɛ ani cɛsirilan min bɛ se ka funteni kɛlɛ , aw bɛ se ka kuma an ka dɔgɔtɔrɔ kɛrɛnkɛrɛnnenw fɛ:

• Cɛ Guo: +86 18944819998 ye

• Cɛ Liu: +86 13705266308 ye

An bɛ tugu baarakɛcogo ɲuman ni danbe la walasa ka furaw bɛɛ lajɛlen di minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani ka feereli kɔfɛ baara jateminɛ.