4 Dɔwɔwɔ ƒe Dzesi Veviwo na PTFE Tape le 3D Printer Hot Beds dzi

Èɖo aba la ɖe ɖoɖo nu, trɔ asi le extruder la ŋu, eye nètso model la wòde blibo. Ke hã le agbalẽ didi aɖe ƒe afã me la, ƒuƒoƒo gbãtɔa kɔna – alo esi vɔ̃ɖi wue nye be, kasɛt si le wò aba dzodzoe dzi la trɔ, si na ka si wotsɔ ƒo ƒu la lé ɖe edzi.

Le 3D tata lɔ̃lawo kple eŋutinunyalawo siaa gome la,... PTFE ƒe dzoxɔxɔ gã ƒe kasɛt si wozãna ɖe aba dzodzoe dzi menye nusi ŋu wobu le emegbe o – enye akpa vevi aɖe si kpɔa ŋusẽ ɖe adhesion, release, kple print quality dzi.

Aokai PTFE tsɔ kasɛt na agbalẽtamɔ̃wɔlawo kple modzakaɖelawo ƒe geɖee nye sia. Wonɔ te ɖe xexeame ŋutɔŋutɔ ƒe nyaŋuɖoɖowo dzi, dɔwɔwɔ ƒe dzesi vevi ene siwo wòle be nàda asɔ lae nye esi.

Dzoxɔxɔ ƒe Tsitretsitsi ƒe Agbɔsɔsɔme – Dedienɔnɔ ƒe Kakaɖedzi Vevitɔ

Ele be dzoxɔxɔ si te ŋu nɔa te ɖe kasɛt la nu ɣeyiɣi didi la natsyɔ abati dzodzoewo ƒe dɔwɔwɔ edziedzi ƒe dzoxɔxɔ dzi bliboe, si aƒo asa na carbonization, deformation, kple peeling.

Aɖaŋuɖoɖowo:

• Zãzã si sɔ (nu akpa gãtɔ): Dzoxɔxɔ si yia edzi le dɔwɔwɔ me tso -70°C va ɖo 260°C – esɔ kple ka siwo katã bɔ.

• Nɔnɔme siwo gbɔ eme (mɔ̃ɖaŋununya ƒe plastik siwo wu 200°C): Wokafu PTFE kasɛt si ŋu ŋusẽ le, si te ŋu nɔa te ɖe dzoxɔxɔ gã si ade 300°C nu enumake.

Vodada ɖeka si bɔ le ezãlawo domee nye be wosusuna be kasɛt si ƒe dzoxɔxɔ lolo wu la wɔa dɔ nyuie wu ɣesiaɣi. Le nyateƒe me la, PTFE tape dzea fafɛ gɔme to nusuekpɔmɔ̃ me wu 260°C, eye ne wu 300°C la, eɖea perfluoroisobutylene – si nye ya si me aɖi le ƒe agbɔsɔsɔ sue aɖe ɖe go. Le aba dzodzoe siwo ƒe dzoxɔxɔ wu 280°C gome la, womekafu PTFE tape o. Ke boŋ zã polyimide (Kapton) kasɛt si me wotsɔ aŋɔti si wotsɔ aŋɔ ƒoa nui vie, alo ahuhɔ̃e ƒe aba si dzi PEI-gbadzɛ le. Le 99% le kplɔ̃dzi 3D agbalẽtamɔ̃wo (max bed temp 110 ° C), dzidzenu 260 ° C PTFE tape le dedie bliboe eye wòwɔa dɔ wu mɔnu bubuwo le asiɖeɖe le dɔwɔwɔ me. Lé ŋku ɖe wò agbalẽtamɔ̃ ƒe aba dzodzoe ƒe dzoxɔxɔ si sɔ gbɔ wu ŋu ɣesiaɣi hafi nàtia kasɛt.

Substrate & Thickness – Gɔmeɖoanyi na Durability kple Dɔwɔwɔ

Nusi wotsɔ ɖo anyigbae lae afia mɔ̃a ƒe ŋusẽ kple eƒe liƒo, gake eƒe titrime ya kpɔa ŋusẽ ɖe alesi wòawɔ ɖeka kple alesi wòate ŋu atrɔ ɖe nɔnɔmewo ŋui dzi.

Substrate Ƒomevi: Wokafui vevie be woatsɔ fiberglass ado ŋusẽe.

Titrime Tiatia:
Titrime vovovowo naa asitɔtrɔ le nɔnɔmewo ŋu kple nusiwo nɔa anyi didina si to vovo – eye titrime si mesɔ o nye nusi bɔ si hea nugbɔ ƒe ʋuʋu alo eƒe nuléle nyuie vɛ.

Aokai PTFE wɔa fiberglass-do ŋusẽ kasɛt si ƒe titrime le vovovo. Míaƒe ememe dodokpɔ ɖee fia be 0.18mm naa ƒuƒoƒo nyuitɔ kekeake si nye conformability (bɔbɔ ƒo xlã abati ƒe go siwo me dzo le evɔ megbã o) kple abrasion tsitretsitsi (tsi agbe le scraper to alafa geɖe me). Le auto-leveling sensors siwo dea dzesi aba ƒe anyime gome la, 0.13mm naa dzoxɔxɔ ƒe ʋuʋu kabakaba wu eye sensor ƒe nutete sue aɖe koe.

Adhesion & Release Property – Vevietɔ na Agbalẽtata ƒe Dzidzedzekpɔkpɔ

PTFE hot bed tape ƒoa dɔwɔwɔ ƒe nɔnɔme eve siwo kpe ɖe wo nɔewo ŋu nu ƒu:

Ŋgɔgbe gome (non-stick release): Wotsɔ PTFE nu si mewɔa dɔ o si ƒe anyigba ƒe ŋusẽ le sue ŋutɔ wɔe. Exea mɔ na PLA, PETG, ABS, TPU, kple ka bubuwo ƒe adhesion – si wɔnɛ be woate ŋu awɔ model demolding bɔbɔe le aba la ƒe fafa vɔ megbe. Ele be eƒe anyigba nanɔ gbadzaa eye do aɖeke naganɔ eme o.

Megbe gome (si léna ɖe nu ŋu le dzoxɔxɔ gã me): Silicone-sensitive-sensitive adhesive coating kpɔa egbɔ be elé ɖe aba dzodzoe la ŋu sesĩe. Ele be wòanɔ te ɖe dzoxɔxɔ ƒe tsatsam enuenu nu evɔ meɖee le eŋu o eye wòagblẽ nu aɖeke ɖi ne woɖee ɖa o – vevesese ƒe teƒe si bɔ ɖe kasɛt siwo ƒe asi bɔbɔ siwo zãa acrylic-nulénu ŋu.

Nuxlɔ̃amedzesi siwo fia be atike si wotsɔna léa nu ɖe ​​nu ŋu nyuie o:

• Tepe ƒe goawo kɔm le agbalẽtata ʋɛ aɖewo megbe

• Kuɖɔ siwo le wɔwɔm le kasɛt la te le dzoxɔxɔ me

• Nusiwo léna ɖe nu ŋu siwo susɔ ɖe glass alo aluminum-ba dzi le eɖeɖe vɔ megbe

Nukatae nye PTFE kasɛt la wɔa kuɖɔwo le tata ʋɛ aɖewo megbe? Nusi gbɔ wòtso wue nye ya si xaxa si kekena ne wodo dzoe. Mɔnu si woatsɔ awɔe le vevie: zã gaxɔgbalẽvi alo squeegee nàtsɔ atsɔ nyaƒoɖeamenu sesẽ aɖe asisi ɖe kasɛt la ŋu tso titina yi gota gɔ̃ hã. Nu bubu si gbɔ wòtsoe nye adhesive outgassing – oligomers siwo mewɔa dɔ o le silicone adhesives siwo ƒe nyonyome mede o siwo wɔa ya le 80-100°C, si wɔa kuɖɔwo le tape la te. PTFE kasɛt nyuitɔwo zãa silicone si ƒe crosslink-density lolo eye ya si dona le eme la mesɔ gbɔ o. Mlɔeba la, ne èta ABS le dzoxɔxɔ 110°C me ɖe kasɛt si woɖo be wòazã 100°C ko atraɖii dzi la, nusi léna ɖe nu ŋu ate ŋu afa eye wòana kasɛt la ‘naʋuʋu,’ si ana wòaʋuʋu kple kuɖɔ. Kpɔ dzoxɔxɔ si le kasɛt la zazã atraɖii kple alesi ewɔla gblɔ be eléa nu ɖe ​​te le dzoxɔxɔ ƒe tsatsam megbe siaa ɖa ɣesiaɣi.

Dimension & Tolerance – Gazazã nyuie ƒe Nuwɔna

Tia nɔnɔme siwo sɔ kple wò aba dzodzoe ƒe lolome ŋutɔŋutɔ.

Nu bubu siwo ŋudɔ woate ŋu awɔ tsitotsito – Amadede ƒe tiatia:
Black PTFE tape ɖea kekeli ƒe keklẽ ƒe nugbegblẽ dzi kpɔtɔna na agbalẽtamɔ̃ siwo ŋu nukpɔkpɔ ƒe sensorwo kple auto-leveling fotoɖemɔ̃wo le. PTFE ɣi alo dzɔdzɔme ateŋu ahe alakpa ʋuʋu vɛ le sensor ƒomevi aɖewo dzi (le kpɔɖeŋu me, BLTouch kple reflective surfaces).

Zãzã Ŋuti Aɖaŋuɖoɖowo Na Tepe ƒe Agbenɔƒe Gãtɔ

nyuitɔ kekeake gɔ̃ hã PTFE ƒe dzoxɔxɔ gã ƒe kasɛt mawɔ dɔ nyuie o ne wozãe vodadatɔe. Wɔ ɖe afɔɖeɖe siawo dzi:

1. Klɔ aba dzodzoe la ƒe anyime nyuie kple isopropyl aha (90%+) be nàɖe ke, ami, kple nusiwo wotsɔna léa nu xoxo siwo susɔ la ɖa.

2. Tsɔ nusi wotsɔna ƒoa nui de eme – ɖe lãgbalẽgolo ƒe akpa sue aɖe ɖa, tsɔ eƒe nugbɔ, emegbe nàhe lãgbalẽgoloa blewuu esime nèle eƒom sesĩe kple ʋuʋudedi be ya ƒe kuɖɔwo naɖe ɖa.

3. Klɔ goawo nasɔ kple abaa be woagakɔ wo tso ka si tra mɔ alo scraper ƒe léle me o.

4. Trɔ kasɛt la enumake ne ède dzesii be:

   • Nusiwo woate ŋu akpɔ alo gouges tso scraper la me

   • Nusiwo meléna o ƒe bu – agbalẽtatawo dzea ƒoƒo gɔme sesĩe akpa

   • Edge warping alo bubbling

   • Amadede ƒe tɔtrɔ alo carbonization

In summary , tiatia PTFE kasɛt nyuitɔ na wò 3D agbalẽtamɔ̃ dzodzoe aba dzi va ɖoa dzesi vevi ene:

Dzoxɔxɔ ƒe didime : 260°C madzudzɔmadzudzɔe na nu akpa gãtɔ; wodo ŋusẽe na mɔ̃ɖaŋununya ƒe plastik siwo ƒe dzoxɔxɔ wu 200°C

Substrate & titrime : Fiberglass do ŋusẽ, 0.18mm na dadasɔ nyuitɔ kekeake (0.13mm na sensor ƒe seselelãme, 0.08mm na gazazã)

Adhesion & release : Silicone adhesive megbe, non-stick PTFE ŋgɔgbe – susɔe aɖeke meli o, warping aɖeke meli o

Dimension & tolerance : Tsɔ wò aba ƒe lolome sɔ; amadede yibɔ kpena ɖe nukpɔkpɔ ƒe sensorwo ŋu

Ne wozãe nyuie eye woɖɔlii ɖe game dzi la, PTFE kasɛt nyui aɖe ana nàta agbalẽ alafa geɖe siwo akpɔ dzidzedze – eye wòaɖe wò tso dziɖeleameƒo si tso ƒuƒoƒo gbãtɔ siwo do kpo nu alo kpɔɖeŋu siwo tsi anyi me.

Èle PTFE kasɛt si ŋu kakaɖedzi le dim na wò 3D agbalẽtamɔ̃a? Aokai PTFE naa agbalẽ xatsaxatsa siwo woɖe ɖe vovo pɛpɛpɛ le kekeme kple titrime vovovowo me, siwo wowɔ wòsɔ nyuie na agbalẽtamɔ̃ xɔŋkɔwo. Te ɖe mía ŋu hena kpɔɖeŋu alo lolome si wowɔ ɖe ɖoɖo nu.

Jiangsu Aokai Nu Yeyewo Mɔ̃ɖaŋununya Co., Ltd. ye nae.

Míetsɔa nu gbogbo aɖewo siwo dometɔ aɖewoe nye PTFE dzoxɔxɔ gã avɔ, dzoxɔxɔ gã tape, mesh alidziblanu, seamless fusing belt, axa ɖeka PTFE avɔ, dzoxɔxɔ-tsitretsitsi conveyor belt kple fiberglass avɔ . Egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu kple aɖaŋuɖoɖo tsitotsito le parameter ŋu ​​li.

Te Ðe Mía Ŋu

• Aƒetɔ Guo: +86 18944819998

• Aƒetɔ Liu: +86 13705266308

Míeléa dɔwɔwɔ nyuie kple fɔmaɖimaɖi me ɖe asi, míenaa egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu le teƒe ɖeka eye míewɔa dɔ siwo ŋu wobua tame le.