4 Baara kɛcogo jiralan jɔnjɔnw PTFE kasɛti kan 3D sɛbɛnnikɛlan ka dilan funtenimaw kan

I ye dilan nivoya, ka extrudeur tuned, ka modeli tigɛtigɛ ka ɲɛ. O bɛɛ n’a ta, sɛbɛnni jan tilancɛ kɔnɔ, layini fɔlɔ bɛ kɔrɔta – walima min ka jugu ni o bɛɛ ye, kaseti min bɛ i ka dilan funteni na, o tigɛra, ka filanin wulilen to nɔrɔlen ye a sanfɛla la.

3D sɛbɛnni kanubagaw ni baarakɛlaw bɛɛ fɛ,... PTFE kaseti funteni caman bɛ kɛ dilan funteni kan, o tɛ miiri kɔfɛ – a ye fɛn nafamaba ye min bɛ nɔ bila nɔrɔli, bɔli, ani sɛbɛnni kɛcogo la.

Aokai PTFE ye kaseti di sɛbɛnnikɛlanw dilannikɛlaw ni ɲɛnajɛlamɔgɔw ma kabini san caman. Ka da diɲɛ kɔnɔ hakilina lakikaw kan, baarakɛcogo jiralan jɔnjɔn naani filɛ nin ye i ka kan ka minnu jateminɛ.

Funteni kunbɛncogo – Lakanali jɔnjɔn

Kasɛti ka funteni kunbɛnni kuntaalajan ka kan ka dilan funtenimaw baarakɛcogo funteni basigilen datugu ka ɲɛ, ka a yɛrɛ tanga karɔbɔli ma, ka fɛn caman tigɛli, ani ka u sɔgɔ.

Ladilikanw:

• Baara kɛcogo kɔrɔ (fɛn fanba): Baarakɛcogo funteni min bɛ to senna, o bɛ daminɛ -70°C la ka se 260°C ma – a bɛ bɛn filaninw bɛɛ ma minnu bɛ kɛ tuma bɛɛ.

• Fɛn minnu ka jugu kosɛbɛ (ɛnjiniyɛri plastiki minnu ka ca ni 200°C ye): PTFE kaseti barikama bɛ fɔ, min bɛ se ka funteni caman muɲu yɔrɔnin kelen fo ka se 300°C ma.

Misali dɔ min ka teli ka kɛ baarakɛlaw la, o ye k’a miiri ko kaseti min ka funteni ka bon, o bɛ baara kɛ ka ɲɛ tuma bɛɛ. Tiɲɛ na, PTFE kaseti bɛ daminɛ ka nɔgɔya ni mikroskɔpi ye ka tɛmɛ 260°C kan, ani ka tɛmɛ 300°C kan, a bɛ perfluoroisobutylene hakɛ fitininw bɔ – gazi toxic. Ni dilan funtenimanw ka ca ni 280°C ye, PTFE kaseti man ɲi. O nɔ na, ​​aw bɛ poliimidi (Kapton) kaseti kɛ ni kola jiri finman ye, walima galasi dilan ni PEI sɛbɛn ye. Ni 99% ye 3D sɛbɛnnikɛlanw ye minnu bɛ tabali kan (max bed temp 110°C), PTFE kaseti 260°C sariyalen bɛ lakana dafalen na, wa a bɛ baara kɛ ka tɛmɛ fɛɛrɛ wɛrɛw kan bɔli baarakɛcogo la. Aw bɛ aw ka sɛbɛnnikɛlan ka dilan funteni hakɛ caman lajɛ tuma bɛɛ sani aw ka kaseti sugandi.

Substrate & Thickness – Muɲuli ni baarakɛcogo jusigilan

Substrat bɛ masin fanga ni sabatili dantigɛ, ka sɔrɔ a bonya bɛ nɔ bila bɛnkan ni sɛgɛsɛgɛli la.

Substrat suguya: Fibreglasi min barika ka bon, o ka ɲi kosɛbɛ.

Janya sugandili :
Janya danfaralenw bɛ fɛn wɛrɛw di minnu bɛ se ka wuli ani ka u muɲu – wa janya jugu ye sababu ye min ka teli ka kɛ sababu ye ka dawolo wuli walima ka a nɔrɔ kojugu.

Aokai PTFE bɛ kaseti dilan min barika ka bon ni fibreglasi ye, a janya ka ca. An ka kɔnɔna sɛgɛsɛgɛliw y’a jira ko 0,18mm bɛ bɛnkan ɲuman di (a bɛ biri dilan da sumalenw lamini na k’a sɔrɔ a ma kari) ani a bɛ se ka sɔgɔsɔgɔ (a bɛ kisi sɔgɔsɔgɔninjɛ tɛmɛsira kɛmɛ caman ma). Ni oto-leveling sensorw bɛ dilan sanfɛla dɔn, 0,13mm bɛ funteni jiginni teliya ani sensɛriw ka dankarili dɔgɔya.

Adhesion & Release Property – A nafa ka bon kosɛbɛ sɛbɛnni ɲɛtaa la

PTFE hot bed tape bɛ baarakɛcogo fila fara ɲɔgɔn kan:

Fɛn min bɛ ɲɛfɛ (a tɛ nɔrɔ) : A dilannen don ni PTFE fɛn ye min tɛ se ka baara kɛ, a sanfɛla fanga ka dɔgɔ kosɛbɛ. A bɛ PLA, PETG, ABS, TPU, ani filaman wɛrɛw nɔrɔli bali – o bɛ kɛ sababu ye ka modɛli demolding nɔgɔya dilan nɛnɛnen kɔfɛ. A yɔrɔ ka kan ka kɛ nɔgɔ ye ani pinɛw tɛ a la.

Kɔfɛla (a nɔrɔli funteni ka bon): Silikɔni tansiyɔn-sɛgɛsɛgɛli nɔrɔlen bɛ a to a ka nɔrɔ kosɛbɛ dilan funteni na. A ka kan ka funteni wulicogo segin-segin muɲu k’a sɔrɔ a ma bɔ a la ani a tɛ to to a bɔli senfɛ – dimi yɔrɔ min ka teli ka kɛ ni kaseti sɔngɔ gɛlɛnw ye minnu bɛ baara kɛ ni akiriliki nɔrɔlen ye.

Lakɔlɔsili taamasiɲɛ minnu bɛ sɔrɔ nɔrɔli juguman na:

• Kaseti dakunw kɔrɔtalen kɔfɛ sɛbɛnni damadɔw kɔfɛ

• Bugun minnu bɛ kɛ kaseti jukɔrɔ funteni waati

• Tolen nɔrɔlen minnu bɛ to galasi walima aliminiyɔmu dilan kan a bɔlen kɔfɛ

Mun na ne ka PTFE kaseti bɛ bulonw lawuli sɛbɛnni damadɔw kɔfɛ? A sababu ka teli ka kɛ fiɲɛ minɛlen ye min bɛ bonya ni a sumana. A kɛcogo nafa ka bon: aw bɛ karti walima squeegee kɛ ka kaseti kɛ ni fanga ye, hali ni degun bɛ a la ka bɔ cɛmancɛ la ka taa kɛnɛma. O sababu wɛrɛ ye nɔrɔlenw bɔli ye – silikoni nɛgɛmafɛnw na minnu man ɲi, oligomɛriw bɛ sɔrɔ minnu ma kɛ fɛn ye, minnu bɛ kɛ lafiɲɛbɔ ye 80-100°C la, ka bugunw kɛ kaseti jukɔrɔ. PTFE kasɛti ɲumanw bɛ baara kɛ ni silikoni ye min ka bon ni gazi bɔli ye min ka dɔgɔ. A laban na, ni aw ye ABS sɛbɛn 110°C la kaseti kan min hakɛ bɛ se ka kɛ 100°C dɔrɔn ye ka to ka baara kɛ ni a ye, o nɔrɔlen bɛ se ka nɔgɔya ani ka a to kaseti ka ‘yɛrɛyɛrɛ’, o bɛ kɛ sababu ye ka kurukuruw ni bugunw lawuli. Aw bɛ kaseti baara kɛcogo basigilen funteni ni a dilannikɛla ka nɔrɔli maracogo fɔlen fila bɛɛ sɛgɛsɛgɛ tuma bɛɛ funteni sɛgɛsɛgɛli kɔfɛ.

Dimension & Tolerance – Baarakɛcogo min bɛ musaka bɔ

Aw bɛ fɛnw sugandi minnu bɛ bɛn aw ka dilan funteni hakɛ yɛrɛ ma.

Fɛn wɛrɛw minnu bɛ se ka kɛ – Kulɛri sugandili :
PTFE kaseti nɛrɛma bɛ yeelen bɔli bali ka dɔgɔya sɛbɛnnikɛlanw ma minnu bɛ ni ɲɛnayeli sensɛriw ye ani kamera minnu bɛ u yɛrɛ nivoya. PTFE finman walima nafama bɛ se ka kɛ sababu ye ka fɛn nkalonmaw bila sensɛri suguya dɔw kan (misali la, BLTouch ni yɔrɔw ye minnu bɛ yeelen bɔ).

Baarakɛcogo ladilikanw walasa ka kasɛti ɲɛnamaya kɛcogo ɲuman sɔrɔ

Hali PTFE kaseti min ka fisa ni funteni caman ye , o tɛna baara kɛ ka ɲɛ ni a kɛra cogo jugu la. Aw bɛ nin fɛɛrɛ ninnu labato:

1. Aw bɛ dilan funteni sanfɛla saniya ka ɲɛ ni isoporopili alkoli ye (90%+) walasa ka buguri, tulu ani nɔrɔlen kɔrɔw bɔ a la.

2. Aw bɛ a kɛ ni sɔgɔlan ye – aw bɛ finimugu yɔrɔ fitinin dɔ bɔ, ka a da nɔrɔ, o kɔ aw bɛ finimugu sama dɔɔni dɔɔni ka a digi kosɛbɛ ni sɔgɔlan ye walasa ka fiɲɛ bɔ.

3. Aw bɛ a dawolo tigɛ ka kɛ ni dilan ye walasa ka wuli bali ka bɔ filanin tununnenw na walima ka sɔgɔsɔgɔninjɛ minɛ.

4. Aw bɛ kasɛti falen joona ni aw y’a kɔlɔsi:

   • Kurukuru walima sɔgɔsɔgɔninjɛ minnu bɛ ye ka bɔ sɔgɔsɔgɔninjɛ la

   • Banakisɛ min tɛ nɔrɔ – sɛbɛnniw bɛ daminɛ ka nɔrɔ kosɛbɛ

   • Edge warping walima bubbling

   • Kulɛri jiginni walima karɔbɔli

Kuma surun na , PTFE kasɛti ɲuman sugandili i ka 3D imprimante dilan funteniman kama, o bɛ jigin ka kɛ taamasiyɛn jɔnjɔn naani ye:

Funteni hakɛ : 260°C bɛ to sen na fɛn fanba la; grade barikama min bɛ kɛ ka ɲɛsin ɛntɛrinɛti plastikiw ma minnu ka ca ni 200°C ye

Substrate & thickness : Fibreglasi barika bonyalen don, 0,18mm ka balansi ɲuman sɔrɔ (0,13mm ka ɲɛsin sensor sensitivity ma, 0,08mm ka kɛ budget ye)

Adhesion & release : Silicone adhesive kɔfɛ, non-stick PTFE ɲɛfɛ – tolen tɛ, a tɛ wuli

Dimension & tolerance : Aw bɛ aw ka dilan hakɛ bɛn; kulɛri nɛrɛma bɛ ɲɛkisɛw dɛmɛ

Ni a kɛra ka ɲɛ ani ni a bilala a nɔ na waati bɛnnen na, PTFE kasɛti ɲuman bɛna sɛbɛnni kɛmɛ caman di aw ma minnu bɛ ɲɛ – ani ka aw kisi layini fɔlɔ dɛsɛlenw walima modɛli nɔrɔlenw ka dusukasi ma.

Aw bɛ PTFE kasɛti dannamɔgɔ ɲini aw ka 3D imprimante kama wa? Aokai PTFE bɛ rollo precision-slit di u bonya ni u bonya suguya caman na, minnu bɛ ɲɛ ka kɛɲɛ ni sɛbɛnnikɛlan modɛliw ye minnu bɛ fɔ kosɛbɛ. Aw ye anw sɔrɔ walasa ka misali walima ka kɛɲɛ ni aw sago hakɛ ye.

A dira Jiangsu Aokai ka fɛn kuraw fɛɛrɛbɔ Co., Ltd. fɛ.

An bɛ fɛn caman dilan i n’a fɔ PTFE fini min bɛ funteni caman bɔ, kase min bɛ funteni caman bɔ, cɛsirilan min bɛ kɛ ni nɛgɛ ye, cɛsirilan min tɛ sɔgɔ, PTFE fini min bɛ kɛ fan kelen fɛ, cɛsirilan min bɛ se ka funteni kɛlɛ ani fini min bɛ kɛ ni fibreglasi ye Ladamuni fɛɛrɛw ani paramɛtiriw lajɛ caman bɛ sɔrɔ.

Aw ye ɲɔgɔn sɔrɔ Anw fɛ

• Cɛ Guo: +86 18944819998 ye

• Cɛ Liu: +86 13705266308 ye

An bɛ tugu baarakɛcogo ɲuman ni danbe la, ka furakɛlicogo kelen-kelenw di minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani ka baara minnu kɛ ni jateminɛ ye.