Ðe Woate Ŋu Adzra PTFE Avɔ si ƒe Dzoxɔxɔ Deŋgɔ Le Ne Egblẽ Le Ezazã Mea?

Jiangsu Aokai New Materials, si nye PTFE ƒe avɔ siwo ƒe dzoxɔxɔ deŋgɔ wɔƒe, na dɔnyala ƒe gɔmesesewo abe alesi gbɔna ene.

Hafi woadze nuwo dzadzraɖo gɔme la, ehiã be woada asɔ akpɔe ɖa be esɔ be woaɖɔ nusiwo gblẽ la ɖo hã. Wokafui be woabia Aokai Nu Yeyewo be woakpɔ egbɔ be nuwo dzadzraɖo kple mɔnuwo wɔ ɖeka kple dzadzɛnyenye kple dedienɔnɔ ƒe dzidzenu siwo sɔ. Zi geɖe la, teƒe sue siwo gblẽ le teƒeteƒewo  sɔ nyuie wu na dzadzraɖo, abe anyigba ƒe ʋuʋu, nugbɔ ƒe vuvu, alo do siwo ƒe didime le sue wu sentimeta 10–15 ene. Ne teƒe si gblẽ la lolo akpa, ele nuteɖeamedzi ƒe teƒe gã aɖe, alo avɔa tsi vevie la, zi geɖe la, yeye ɖɔliɖɔli nyea tiatia si me ga mele o eye kakaɖedzi le eŋu wu.

Le nusiwo gblẽ ƒomevi vovovowo gome la, nuwo ɖɔɖɔɖomɔnu vovovowo li siwo ŋu woawo ŋutɔ ƒe viɖewo kple seɖoƒewo le:

 

Dɔwɔwɔ Ŋuti Ðoɖowo Tsitotsito

Mɔnu 1: Tape / Patch Nutsyɔtsyɔ

Esɔ na nuwo dzadzraɖo kpata alo dɔwɔwɔ siwo me ŋusẽ mele boo o.

Nusiwo hiã :PTFE dzoxɔxɔ gã ƒe tape alo patch, dɔwɔƒewo ƒe aha, avɔ dzadzɛ, lãgbalẽŋudɔwɔnu.

1. Surface Cleaning :Klɔ teƒe si gblẽ kple anyigba si ƒo xlãe nyuie kple aha be nàkpɔ egbɔ be ami alo ke aɖeke manɔ eme o.

.​

Mɔnu 2: Hot-Press Patching (Wokafui na Dzadzraɖo Veviwo) .

Mɔnu sia naa ŋusẽ gã aɖe nɔa avɔa ŋu eye wònaa avɔa gawɔa dɔ nyuie, si wɔnɛ be wozãnɛ geɖe le dɔwɔƒewo dzadzraɖo me.

Dɔwɔnu siwo hiã :Angle grinder, tungsten carbide sanding disc, F46 hot-melt film (joint adhesive), PTFE patch si me nu ɖeka ma ke le, dɔwɔƒewo ƒe aha, hot-press welding machine alo high-temperature iron (ate ŋu awɔ 380–400°C).

1. Sanding the Damaged Area :Zã angle grinder nàtsɔ awɔ teƒe si gblẽ la wòanɔ blɔ eye nàwɔ beveled edge kple roughened surface be wòadzi bonding area.

2. Klɔ Sanded Surface :Trɔ asi le sanded teƒe keŋkeŋ kple dɔwɔƒewo aha be ke kple amiɖeɖe.

3. F46 Hot-Melt Film dede :Lã F46 film ƒe akpa aɖe si lolo vie wu teƒe si gblẽ eye nàtsɔe ade gɔmeɖoanyi avɔa kple patch la dome — esiae nye nu vevitɔ na dzoxɔxɔ ƒe fusion ƒe kadodo.

4. Dzoxɔxɔ kple Tete :Do dzo na teƒe si wodzrae ɖo la wòade 380–400°C le nyaƒoɖeamenu me vaseɖe esime F46 film la naƒo, eye nàbla avɔa ɖe avɔa ŋu sesĩe.

5. Holding Pressure and Cooling :Lé nyaƒoɖeamenu me ɖe asi le dzɔdzɔme fafaɣi be nàkpɔ egbɔ be teƒe si wodzra ɖo la le gbadzaa eye wòte ŋu trɔna bɔbɔe.

Dedienɔnɔ ƒe Ŋkuɖodzi :Sanding naa ke dona, eye dɔwɔwɔ le dzoxɔxɔ gã me hea afɔku vɛ na dzobibi. Do dedienɔnɔ ƒe ŋkumewu, kewutike, kple asigɛ siwo me dzoxɔxɔ mele o ɣesiaɣi.

PTFE avɔ si me dzoxɔxɔ le ŋutɔ dzadzraɖo nye mɔ nyui aɖe si dzi woato aɖe gazazãwo dzi akpɔtɔ, vevietɔ ne nu suesuesue siwo gblẽ. Da alesi gbegbe nusiwo gblẽ le eŋu kpɔ ɣesiaɣi hafi nàwɔ dɔ eye nàtia nuwo ɖɔɖɔɖomɔnu si sɔ si wotu ɖe nɔnɔme siwo le teƒea dzi.

Nyatakaka siwo le etame la tso Jiangsu Aokai New Materials Technology Co., Ltd. gbɔ.

Ne èdi nyatakaka tsitotsito, dɔwɔwɔ ƒe nɔnɔmewo kple míaƒe adzɔnuwo ƒe hatsotso bliboa ƒe egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu — siwo dometɔ aɖewoe nye PTFE dzoxɔxɔ gã avɔwo, PTFE dzoxɔxɔ gã tapes, PTFE dzoxɔxɔ gã mesh alidziblanu, seamless alidziblanu na fusing nyatamɔ̃wo, axa ɖeka PTFE avɔwo, dzoxɔxɔ gã tsi tre ɖe conveyor belts, dzoxɔxɔ gã fiberglass avɔwo kple bubuwo — taflatse te ɖe mía ŋu:

· Subɔsubɔdɔ ƒe Telefon:Aƒetɔ. Guo: 18944819998 Aƒetɔ Liu: 13705266308