Jiangsu Aokai New Materials, a ɛyɛ PTFE ntama a ɛyɛ hyew kɛse, de adwumayɛfo nhumu ma sɛnea edidi so yi.

Ansa na wubefi ase asiesie no, ɛho hia sɛ wohwehwɛ mu hwɛ sɛ ebia ɛfata sɛ wosiesie nneɛma a asɛe no anaa. Wɔhyɛ nyansa sɛ wobɛkɔ Aokai New Materials nkyɛn akɔhwɛ sɛ nneɛma a wɔde siesie ne akwan a wɔfa so siesie no ne ahotew ne ahobanbɔ gyinapɛn a ɛfata hyia. Mpɛn pii no, mmeae nketewa a asɛe wɔ mpɔtam hɔ no  fata kɛse sɛ wosiesie, te sɛ ɔfasu a ɛyɛ mmerɛw, anoano a ɛtetew, anaa ntokuru a ne kɛse sua sen sɛntimita 10–15. Sɛ beae a asɛe no sõ dodo, ɛwɔ beae a adwennwen kɛse wom, anaasɛ ntama no abɔ akwakoraa kɛse a, mpɛn pii no, sɛ wɔde foforo besi ananmu a, ɛyɛ nea ɛho ka sua na wotumi de ho to so.

Wɔ nneɛma ahorow a asɛe ho no, akwan horow pii wɔ hɔ a wɔfa so siesie a ɛwɔ wɔn ankasa mfaso ne anohyeto ahorow:

 

Adwumayɛ ho nhyehyɛe a ɛkɔ akyiri

Ɔkwan 1: Teyp / Patch a Wɔde Kata So

Ɛfata ma nsiesie a egye ntɛmpɛ anaasɛ dwumadie a ahoɔden a ɛho nhia pii.

Nneɛma a ehia :PTFE teyp anaa patch a ɛyɛ hyew kɛse, mfiridwuma mu nsa, ntama a ɛho tew, scissors.

1. Surface Cleaning :Fa nsa tew beae a asɛe ne nea atwa ho ahyia no yiye na ama woahwɛ ahu sɛ ngo anaa mfutuma biara nni hɔ.

.​

Ɔkwan 2: Hot-Press Patching (Wɔkamfo kyerɛ sɛ wɔmfa nsiesie nneɛma a ɛho hia) .

Saa kwan yi ma ahoɔden a ɛkɔ soro wɔ nkitahodi mu na ɛma ntama no san yɛ adwuma yiye, na ɛma wɔde di dwuma kɛse wɔ mfiridwuma mu nsiesie mu.

Nnwinnade a ehia :Angle grinder, tungsten carbide sanding disc, F46 hot-melt film (joint adhesive), PTFE patch a ade koro no ara, mfiridwuma mu nsa, hot-press welding afiri anaa dade a ɛyɛ hyew kɛse (a etumi yɛ 380–400°C).

1. Sanding the Damaged Area :Fa angle grinder di dwuma ma beae a asɛe no yɛ mmerɛw na yɛ beveled edge a roughened surface na ama bonding area no akɔ soro.

2. Cleaning the Sanded Surface :Fa mfiridwuma mu nsa popa baabi a anhwea ayɛ no koraa na ama mfutuma ne srade afi hɔ.

3. Inserting F46 Hot-Melt Film :Twi F46 film asinasin a ɛsõ kakra sen beae a asɛe no na fa to nnyinaso ntama ne patch ntam — eyi ne ade titiriw a wɔde yɛ thermal fusion bonding.

4. Ɔhyew ne Mia :Ma beae a wosiesie no yɛ hyew kosi bɛyɛ 380–400°C wɔ nhyɛso ase kosi sɛ F46 sini no bɛbɔ, na abɔ aduru no akyekye ntama no denneennen.

5. Holding Pressure and Cooling :Kura nhyɛsoɔ mu wɔ abɔdeɛ mu onwini mu na ama woahwɛ ahu sɛ beaeɛ a wɔasiesie no yɛ petee na ɛyɛ mmerɛw.

Ahobammɔ Nkaebɔ :Sanding ma mfutuma ba, na sɛ wɔde di dwuma wɔ ɔhyew a ɛkɔ soro mu a, ɛde asiane ba sɛ ɛbɛhyew. Hyɛ ahobammɔ ahwehwɛ, mfutuma akataso, ne nsateaa a ɔhyew ntumi nkɔ mu bere nyinaa.

PTFE ntama a ɛyɛ hyew kɛse a wobesiesie no yɛ ɔkwan a etu mpɔn a wɔfa so tew ɛka so, titiriw wɔ nneɛma nketenkete a asɛe ho. Bere nyinaa hwɛ sɛnea nneɛma asɛe no kodu ansa na woayɛ adwuma na paw ɔkwan a ɛfata a wobɛfa so asiesie a egyina tebea horow a ɛwɔ beae hɔ so.

Nsɛm a ɛwɔ atifi hɔ no yɛ nea Jiangsu Aokai New Materials Technology Co., Ltd. na ɛde mae.

Sɛ wopɛ nsɛm a ɛkɔ akyiri a, application scenarios ne customized solutions of our full product range — a PTFE high-temperature fabrics, PTFE high-temperature tapes, PTFE high-temperature mesh belts, seamless belts for fusing presses, single-sided PTFE ntama, ɔhyew a ɛkorɔn a ɛko tia conveyor belts, ɔhyew a ɛkorɔn fiberglass ka ho ntama ne nea ɛkeka ho — yɛsrɛ wo, di yɛn ho nkɔmmɔ:

· Ɔsom Hotline:Owura. Guo: 18944819998 Owura Liu: 13705266308