Yu kin Ripair PTFE High-Temperature Fabric Afta i dɔn pwɛl we dɛn de yuz am?

Jiangsu Aokai Nyu Matirial, we na PTFE ay-tɛmpracha fabrik manifakta, de gi pɔshɔnal insayt lɛk dis.

Bifo yu bigin fɔ ripɛnt, i nid fɔ chɛk if di damej fayn fɔ fiks. I fayn fɔ mek yu go to Aokai Nyu Matirial fɔ mek shɔ se di tin dɛn we dɛn de yuz fɔ mek di say dɛn we dɔn pwɛl ɛn di we aw dɛn de mek am, gri wit di rilevɛns hajɛns ɛn sefty standad dɛn. jεnarali, lokaliz sכm εria dεm we dεn dכn  pwεl kin fayn fכ rεpa, lεk sכfa skrach, ed tεar, כ ol dεm we sכm pas 10–15 cm in dayamita. If di say we dɔn pwɛl tu big, i de na say usay big strɛs de, ɔ di klos dɔn ol bad bad wan, fɔ chenj am wit nyu wan, bɔku tɛm na tin we nɔ go tek bɔku mɔni ɛn we pɔsin kin abop pan.

Fɔ difrɛn kayn damej, sɔm we dɛn de fɔ mek dɛn ripɛnt wit dɛn yon bɛnifit ɛn tin dɛn we dɛn nɔ ebul fɔ du:

 

Ditayl Ɔpreshɔn Prosidyuz

Di we 1: Tep / Patch Kɔva

I fayn fɔ imejɛnsi ripa ɔ aplikeshɔn wit lɔw trɛnk rikwaymɛnt.

Di tin dɛn we dɛn nid :PTFE ay-tɛmpracha tep ɔ pat, industrial alkol, klin klos, siza.

1. Sɔfays Klin :Klin di say we dɔn pwɛl ɛn di say we de rawnd am fayn fayn wan wit rɔm fɔ mek shɔ se nɔ ɔyl ɔ dɔst nɔ de.

2. Kɔva ɛn Bɔnd :Kɔt di tep ɔ pat we big smɔl pas di say we dɔn pwɛl, pul di rilis layna, put am fayn fayn wan, ɛn pres am fayn fayn wan wit rɔla ɔ had tin fɔ mek yu nɔ gɛt di bɔbul dɛn we di briz de blo.

Di 2 we fɔ du am: Hot-Press Patching (Dɛn kin advays fɔ mek dɛn ripa am we rili impɔtant)

Dis we ya de gi ay bonding trɛnk ɛn i de mek di klos in wok fayn fayn wan, we de mek dɛn yuz am bɔku bɔku wan fɔ mek di tin dɛn we dɛn dɔn mek na di industri.

Tul dɛn we dɛn nid :Angle grinder, tungsten carbide sanding disk, F46 hot-melt film (joint adhesive), PTFE patch we gɛt di sem matirial, industrial alkol, hot-pres wɛldin mashin ɔ ay-tɛmpracha ayɛn (we ebul fɔ 380–400°C).

1. Sandin di Damaged Area :Yuz angle grinder fɔ smooth di damej eria ɛn mek wan beveled ed wit wan roughened surface fɔ inkrisayz di bonding eria.

2. Klin di Sand Surface :Waip di sand eria komplit wit industrial alcohol fɔ pul dɔst ɛn gris.

3. Insay F46 Hot-Melt Film :Kɔt wan pat pan F46 film we big smɔl pas di eria we dɔn pwɛl ɛn put am bitwin di bays fabrik ɛn di pat — dis na di ki matirial fɔ thermal fusion bonding.

4. Hεt εn Prεs :Hεt di ripa εria to aprכksimatli 380–400°C כnda prεshכn te di F46 film mεlt, bכnd di pat fayn fayn wan to di fabrik.

5. Hol Prεshכn εn Kul :Mεnten prεshכn we yu de kol natura fכ mek sכh se di εria we dεn rεpεr flat εn fleksibul.

Sefty Reminder :Sand de mek dɔst, ɛn we yu de wok wit ay tɛmpracha, dat kin mek yu gɛt risk fɔ mek yu skel. Ɔltɛm wɛr sef gɔgl, dɔst mask, ɛn glɔv we nɔ de wam.

Fɔ ripɛnt PTFE ay-tɛmpracha fabrik na fayn we fɔ ridyus di kɔst, mɔ fɔ smɔl damej. Ɔltɛm asɛs di kayn damej bifo yu ɔpreshɔn ɛn pik di rayt we fɔ ripɛnt bay di kɔndishɔn we de na di sayt.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj — inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ fiuzin prɛs, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt, ay-tɛmpracha fayv glas fabrics ɛn mɔ — duya kɔntakt wi:

· Savis Hotlayn:Mista. Guo: 18944819998 Mista Liu: 13705266308 Di wan dɛn we de wok fɔ di kɔmni