Alesi Nàwɔ Axe Mɔ Na PTFE Tape Gbagbã Le Bending Kple Ʋuʋu Gbugbɔgadzɔ Te

Le nubablɛwo, mɔ̃ siwo wotsɔ xea dzoxɔxɔ nu, kple nuɖuɖu ŋuti dɔwɔnuwo me la, . PTFE ƒe dzoxɔxɔ gã ƒe tape ɣesiaɣi, woʋunɛ, eye wozinɛ dzi – tsatsam le tsatsam megbe. Wobɔbɔa Le ɣeyiɣi aɖe megbe la, nu sia si nɔa anyi didina gɔ̃ hã ate ŋu agbã alo agbã.

Nukatae esia dzɔna ɖo? Ŋuɖoɖoa le nu etɔ̃ me: nusi wotsɔ blae, nusi wotsɔ léa nu ɖe ​​eŋu, kple alesi wotsɔa kasɛt la dea eme.

Le Aokai PTFE , míedzro agbledeƒe ƒe kpododonu alafa geɖe me. Nyati sia gblɔ aɖaŋuɖoɖo nyui siwo ana kasɛt ƒe agbenɔƒe nadidi ɖe edzi eye woaƒo asa na eƒe gbagbã kaba.

Do ŋusẽ xɔtuɖoɖoa – Substrate kple Thickness

Nusi le anyigba la wɔa dɔ abe xɔtunu ene, si koŋ afia alesi woate ŋu abɔbɔe kple alesi wòate ŋu avuvui.

Pure PTFE film ɖea asitɔtrɔ nyuiwo fiana gake mɔ̃ɖaŋununya ƒe ŋusẽ mesɔ gbɔ o – ebɔbɔna be wòavuvu le nuteɖeamedzi enuenu te. Glass fiber reinforced PTFE na tensile ŋusẽ, aɖatsi tsitretsitsi, kple creep tsitretsitsi nyona ɖe edzi ŋutɔ, si wɔe be wònye tiatia si wodi wu na dynamic bending nɔnɔmewo.

Titrime hã le vevie ŋutɔ. 0.13mm subɔna abe fli si ma nu ene. Tepe siwo le tsɛ wu 0.13mm la te ŋu trɔna bɔbɔe gake ŋusẽ mele wo ŋu o, ele bɔbɔe be woatu microcracks ne wozi wo dzi enuenu eye wokeke wo.

Kafukafu : Le dɔwɔnu akpa gãtɔ siwo ŋu ŋusẽ le gome la, 0.18mm ƒe titrime kple glass fiber ƒe ŋusẽdodoe nye tiatia si wozãna ɖaa.

Le dɔwɔwɔ siwo me wowɔa nu geɖe le abe band sealers siwo yia edzi (siwo wɔa dɔ le tsatsam 30-60 le miniti ɖeka me) me la, kasɛt la ƒe bending radius ƒo xlã dzoxɔxɔnu la nye design parameter vevi aɖe. Bending radius si le sue wu 5mm dzia teƒea ƒe nuteɖeamedzi ɖe edzi wu 300% ne wotsɔe sɔ kple 15mm radius, si wɔnɛ be crack ƒe gɔmedzedze kabakaba ŋutɔ. Le tight-radius dɔwɔwɔ mawo gome la, glass fiber reinforced PTFE tape si ƒe xɔtunu si wolɔ̃ (ke menye film-based tape o) zazã ate ŋu ana flex ƒe agbenɔƒe nadzi ɖe edzi zi gbɔ zi 5-10. Tsɔ kpe ɖe eŋu la, kasɛt siwo ƒe megbe le blɔ wu la mewɔa ememe ʋuʋu boo le wo bɔbɔ me o, si wɔnɛ be ɖeɖiteameŋu dzi ɖena kpɔtɔna ɖe edzi. Agblemenukuwo ɖee fia be tɔtrɔ tso 0.10mm dzadzɛ PTFE film tape dzi yi 0.18mm glass fiber reinforced tape dzi naa dɔwɔwɔ ƒe agbenɔƒe didi tso kwasiɖa 2 va ɖo ɣleti 6 kple edzivɔ le nutrenu siwo wozãna zi geɖe me.

Tia Atike Si Wotsɔ Klɔa Nu Nyuitɔ

Adhesive la doa ka kple tape la kple dɔwɔnua – nu vevi aɖe si kpɔa ŋusẽ ɖe dynamic service life dzi. Silicone ƒe nyaƒoɖeamenu-sesẽ ƒe aŋenue nye tiatia nyuitɔ kekeake na dzoxɔxɔ gã ƒe nɔnɔme siwo me ŋusẽ le.

Nusita silicone ɖua dzi le bending dɔwɔwɔwo me:

• Ete ŋu nɔa te ɖe eƒe bɔbɔ kple ʋuʋu enuenu nu evɔ megbãna o

• Etrɔna ɖe dzoxɔxɔ kple vuvɔ ƒe tsatsam siwo ɖɔlia wo nɔewo ŋu

• Eléa adhesion me ɖe asi le flex cycle akpe geɖe megbe gɔ̃ hã

Aokai PTFE ’s in-house testing ɖee fia be silicone adhesive tapes léa woƒe ʋuʋu ƒe ŋusẽ gbãtɔ ƒe 90% kple edzivɔ le 10,000 ƒe bending cycles megbe, esime acrylic-based tapes bu va ɖo 50% le 5,000 cycles me. Le dɔwɔnu siwo zɔna gaƒoƒo 16 gbesiagbe gome la, vovototo sia fia be ɣleti geɖe ƒe dɔwɔwɔ ƒe agbenɔƒe bubu.

Le PTFE kasɛt siwo wozãna le nutrenu siwo trɔna ɖe wo nɔewo ŋu (le kpɔɖeŋu me, nutrenu mɔ̃ siwo yɔa nɔnɔme si le tsitrenu) gome la, ele be nutrenu la natsi tre ɖe ‘si fafɛ ƒe sisi’ hã ŋu – eƒe tɔtrɔ vivivi le nyaƒoɖeamenu me. Silicone-nulénu siwo ƒe nyonyome mede o ate ŋu aƒo tso kasɛt la ƒe nugbɔ te le wo zazã ɣeyiɣi didi megbe, si ana nulénu siwo susɔ ɖe nusi wowɔ alo nutrenu la dzi. Silicone adhesives siwo ƒe crosslink-density lolo siwo ŋu dzoxɔxɔ ƒe xɔtunu le la léa woƒe didime ƒe liƒo me ɖe asi le dzoxɔxɔ 250°C gɔ̃ hã me. Ne èle PTFE kasɛt tiam na ʋuʋudedi ƒe dɔwɔwɔ le ɣeyiɣi geɖe me la, bia nyatakaka tso ‘shear adhesion failure temperature’ (SAFT) kple ‘holding power’ ŋu – asixɔxɔ siwo wu 260°C kple gaƒoƒo 24 kple edzivɔ le 200°C fia be adhesive system sesẽ aɖe le asiwò.

Eɖoɖo Kple Beléle Na E Nyuie Be Woaxɔ Agbe Didi

Ne wozã wo nyuie eye wodzra wo ɖo nyuie ko hafi adzɔnu xɔasiwo naa dɔwɔwɔ nyuitɔ kekeake.

Dɔwɔwɔ le anyigba dzi Hafi Woatsɔe
Akɔ dɔwɔnuwo ƒe anyigba ŋu nyuie eye nàtsɔ ethanol si me tsi mele o alo isopropanol aƒu gbe. Ami ƒe ɖiƒoƒo, ke, kple tsi nana be nusiwo léna ɖe nu ŋu la gbɔdzɔna eye wònana woɖea ɖa kaba. Zã 800-1000 grit fine sandpaper nàtsɔ akɔ ga gbadzɛwo ŋu vie – esia doa mɔ̃wo ƒe kadodo ɖe wo nɔewo ŋu ɖe ŋgɔ eye wònaa ƒoƒo ƒe ŋusẽkpɔɖeamedzi nyona ɖe edzi.

Tension-Free Installation and Edge Reinforcement
Da kasɛt la ɖe dzɔdzɔme nu evɔ màkeke o. Nuteɖeamedzi si le nutete ŋu hea nutete kple ʋuʋudedi vɛ le dzoxɔxɔ ƒe tsatsam me. Tsɔ nusi wotsɔna ƒoa nu la tea eŋu sɔsɔe tso titina yi axa eveawo be ya ƒe kuɖɔwo naɖe ɖa. Do ŋusẽ nugbɔwo eye nàƒo wo nu ƒu – alo nàde silicone nutrenu si te ŋu nɔa te ɖe dzoxɔxɔ gã nu – be nàxe mɔ ɖe nugbɔwo kɔkɔ nu.

Dɔwɔwɔ ƒe Nɔnɔme ƒe Asitɔtrɔ

• Na dɔwɔwɔ ƒe dzoxɔxɔ nanɔ anyi wu 260°C – si nye ɣeyiɣi didi ƒe seɖoƒe na silicone adhesive

• Ƒo asa na dzoxɔxɔ si gbɔ eme le mia gbɔ (teƒe siwo dzoxɔxɔ le) .

• Xɔ mɔ ɖe mɔ̃wo ƒe nyaƒoɖeamenu si gbɔ eme si ate ŋu agbã kasɛt la nu

• Lé be nànɔ dzadzɛ be ke kple ga ƒe akpa suesuesuewo naɖe ʋuʋudedi dzi akpɔtɔ

Dzroƒe Edziedzi Kple Eɖɔliɖɔli Le Ɣeyiɣi Dzi
PTFE tape nye akpa si woate ŋu azã le dɔwɔwɔ si me ŋusẽ le me. Tsɔe ɖɔ li enumake ne esiawo dometɔ aɖe dze:

• Edge warping alo kɔklɔ

• Carbonization, yellowing, alo dzobibi ƒe dzesiwo

• Adhesive ƒe kpododonu, overflow, alo ʋuʋu

• Abrasion si woate ŋu akpɔ, microcracks, alo pinholes

Kpuie ko la – Nu vevi siwo woatsɔ axe mɔ ɖe kasɛt ƒe gbagbã nu

In summary , mɔxexe ɖe ƒe gbagbã kple gbagbã nu PTFE ƒe dzoxɔxɔ gã ƒe tape le eƒoƒo enuenu te va ɖoa tiatia etɔ̃ dzi: glass fiber reinforced substrate, 0.18mm thickness (alo si sɔ na wò agba), kple silicone adhesive. Eɖoɖo nyuie – anyigba si le dzadzɛ, tete aɖeke mele eme o, nugbɔ ƒe ŋusẽdodo – naa agbenɔƒe si wɔa dɔ nyuie la dzina ɖe edzi zi gbɔ zi eve.

Le dɔwɔwɔ siwo me wowɔa nu geɖe le (nutrenuwo, agbalẽtamɔ̃wo, mɔ̃ siwo tsɔa nu siwo ƒe didime le sesẽm) gome la, bu glass fiber si wolɔ̃ si ŋu wodo ŋusẽe ƒe grade ŋu eye nàlé ŋku ɖe eŋu ɣleti sia ɣleti be microcracks hã le eme hã.

Èhiã kpekpeɖeŋu le PTFE kasɛt nyuitɔ tiatia me na wò dɔwɔnu siwo le ŋusẽ kpɔma? Aokai PTFE’s technical team naa dɔbiagbalẽviwo me dzodzro femaxee. Te ɖe mía ŋu kple wò mɔ̃a ƒe nɔnɔmewo kple eƒe tsikpe ƒe agbɔsɔsɔme.

Jiangsu Aokai Nu Yeyewo Mɔ̃ɖaŋununya Co., Ltd. ye ɖee ɖe go.

Ne èdi parameters tsitotsito, dɔwɔwɔ ƒe nyawo, kple egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu ƒe blibo-ƒomevi nu siwo dometɔ aɖewoe nye PTFE dzoxɔxɔ gã avɔ, PTFE dzoxɔxɔ gã tape, PTFE mesh alidziblanu, seamless fusing alidziblanu, ɖeka-afã PTFE avɔ, dzoxɔxɔ kɔkɔ tsitretsitsi conveyor belt kple fiberglass avɔ , taflatse te ɖe mía ŋu:

• Aƒetɔ Guo: +86 18944819998

• Aƒetɔ Liu: +86 13705266308

Míeléa dɔwɔwɔ nyuie kple fɔmaɖimaɖi me ɖe asi, eye míeɖoe kplikpaa be míana egbɔkpɔnu siwo ŋu kakaɖedzi le le teƒe ɖeka kple dɔ siwo ŋu wobua tame le.