Aw Fɔ Mek PTFE Tep Krak Ɔnda Ripit Bɛnd Ɛn Opin

Insay layn dɛn we dɛn kin yuz fɔ pak tin dɛn, mashin dɛn we dɛn kin yuz fɔ sidɔm wit ɔt, ɛn tin dɛn we dɛn kin yuz fɔ mek it, . PTFE ay-tεmpratura tεp de bεn, opin, εn prεs כltεm – saykl afta saykl. As tɛm de go, ivin dis tin we kin te kin mek i krak ɔ brok.

Wetin mek dis kin apin? Di ansa de pan tri tin dɛn: di sabstret, di adeziv, ɛn aw dɛn put di tep.

Na Aokai PTFE , wi dɔn analayz bɔku bɔku fil dɛm we nɔ wok. Dis atikul de sheb fayn fayn tin dɛn fɔ mek di tep liv lɔng ɛn fɔ mek i nɔ brok bifo tɛm.

Riinfɔs di Strukchɔ – Sabstret ɛn Tiknɛs

di sabstεrayt de akt lεk di fכm, fכndamεntli ditarmin bεnd rεsistεns εn tεar strכng.

Pure PTFE film ficha gud fleksibiliti bɔt insufishɛnt mɛkanikal trɛnk – prone fɔ tear ɔnda ripit strɛs. Glas fayba riinfɔs PTFE rili impɔtant tɛnsiɛl trɛnk, tear rɛsistɛns, ɛn krip rɛsistɛns, we de mek am di prɛferɛd opshɔn fɔ dinamik bɛnd sɛnɛriɔ.

Tiknɛs bak impɔtant. 0.13mm de sav as divayd layn. Tep dεm we tin pas 0.13mm kin fleksibul yet lכw in trεnk, i izi fכ divεlכp maykrokrak כnda ripit kכmpreshכn εn strεch.

Rikɔmɛndishɔn : Fɔ mɔs dinamik ikwipmɛnt, 0.18mm tik wit glas fayba riinfɔsmɛnt na di standad chuk.

Insay ay-saykl aplikeshɔn lɛk kɔntinyu band sila (we de wok pan 30-60 saykl pan minit), di bɛnd rayus fɔ di tep rawnd di itin ɛlimɛnt na wan impɔtant dizayn paramita. wan bεnd rayus we sכm pas 5mm de inkrεs lokal strεs bay ova 300% kכmpεr to 15mm rayus, dramatikli aksεlεrayt krak initiashכn. Fɔ dɛn kayn tayt-rayus aplikeshɔn ya, yuz glas fayba riinfɔs PTFE tep wit wev kɔnstrɔkshɔn (pas film-based tep) kin inkrisayz fleks layf bay 5-10 tɛm. Apat frɔm dat, tep dɛn we gɛt smol baksayd finish kin mek smɔl intanɛnt frikshɔn we dɛn de bɛnd, we kin mek pɔsin taya mɔ. Fil data sho se we yu chenj frɔm 0.10mm pure PTFE film tep to 0.18mm glas fayba riinfɔs tep de ɛkstɛnd savis layf frɔm 2 wik to ova 6 mɔnt insay ay-frikyuɛnsi siling ikwipmɛnt.

Pik di Rayt Adhesive

Di adeziv de kɔnɛkt di tep to di ikwipmɛnt – wan impɔtant tin we de afɛkt dinamik savis layf. Silikɔn prɛshɔn-sɛnsitiv adeziv na di bɛst chuk fɔ dinamik ay-tɛmpracha ɛnvayrɔmɛnt.

Wetin mek silikon win fɔ bɛnd aplikeshɔn dɛn:

• I de tinap tranga wan fɔ bɛnd ɛn shek shek bak ɛn nɔ krak

• Adap to alternating hot ɛn kol saykl dɛn

• I de mek di adheshon ivin afta tawzin fleks saykl dεm

Aokai PTFE ’s in-haus testin sho se silikon adeziv tep dεm de kip ova 90% pan dεn initial peel strכng afta 10,000 bεnd saykl dεm, we akrilik-bεys tep dεm de lכs 50% insay 5,000 saykl dεm. Fɔ di ikwipmɛnt we de rɔn 16 awa ɛvride, dis difrɛns de translet to mɔnt dɛn fɔ ɛkstra savis layf.

Fɔ PTFE tep dɛn we dɛn kin yuz pan rɛsiprokɛt silin bar (ɛgz., vertikal fɔm fil silin mashin dɛn), di adeziv fɔ rɛsist bak ‘kol flɔ’ – smɔl smɔl difɔmeshɔn ɔnda prɛshɔn. Di silikon adeziv dɛn we nɔ fayn kin swɛt kɔmɔt ɔnda di tep ed afta dɛn dɔn yuz am fɔ lɔng tɛm, ɛn dis kin mek di adeziv we lɛf na di prɔdak ɔ di siling bar. High kroslink-density silikon adhesives wit wan thermosetting strɔkchɔ de mentɛn dimɛnshɔnal stebiliti ivin na 250°C. We yu de pik PTFE tep fɔ ay-frikyuɛnsi bɛnd aplikeshɔn, aks fɔ data bɔt ‘shia adhesion failure temperature’ (SAFT) ɛn ‘holding power’ – valyu dɛn we pas 260°C ɛn ova 24 awa na 200°C de sho se yu gɛt strɔng adhesive sistem.

Kɔrɛkt Instɔlɛshɔn ɛn Mentɛnans fɔ Lɔng Layf

Premium prodakt de deliver optimal pefomans onli wit di rayt yus ɛn mentenɛns.

Tritmɛnt fɔ di say we yu de yuz am bifo yu put am
Klin ɛn dray di say dɛn we di ikwipmɛnt dɛn de, fayn fayn wan wit anhydrous ethanol ɔ isopropanol. Ɔyl stɛyn, dɔst, ɛn mɔstɔ kin mek di adheshon wik ɛn mek i kin pul am kwik kwik wan. Yuz 800-1000 grit fayn sandpepa fɔ polish smɔl smɔl mɛtal sɔfays – dis de ɛp fɔ mek mɛkanikal intalɔk ɛn impruv stik ifɛkt.

Tɛnshɔn-Fri Instɔlɛshɔn ɛn Ɛj Riinfɔsmɛnt
Le di tep natura l we yu nɔ strɛch. Tεnsil strεs de mek i shrink εn wכp we di tεmral saykl de. Pres ivin frɔm di sɛnt to ɔl tu di say dɛn wit skrap fɔ pul di bɔbul dɛn we di briz de blo. Strɔng ɛn kɔmpakt edj dɛn – ɔ put ay-tɛmpracha rɛsistɛns silikon silin – fɔ mek di edj nɔ es.

Ajɔstmɛnt fɔ di Kɔndishɔn fɔ di Wok

• Kip di opareshכn tεmprach כ dכn 260°C – di lכng tεm limit fכ silikon adhesive

• Nɔ mek di ples wam pasmak (hot spot) .

• Nɔ mek di mashin prɛshɔn pasmak we go mek di tep krɔs

• Mek di say we yu de klin fɔ mek yu nɔ abrayd frɔm dɔst ɛn mɛtal patikyula dɛn

Rigyul Inspekshɔn ɛn Riplesmɛnt insay Taym
PTFE tep na pat we pɔsin kin yuz insay dinamik ɔpreshɔn. Riples am kwik kwik wan we ɛni wan pan dɛn tin ya apia:

• Edj warping ɔ liftin

• Kabonizashɔn, yɔlɔ, ɔ skɔch mak

• Adhesive failure, ovaflɔ, ɔ displeysmɛnt

• Abrashɔn we pɔsin kin si, maykrokrak, ɔ pinhol dɛn

Sɔma – Ki Takeaways fɔ mek Tep Krak

In sɔmari , fɔ mek nɔ krak ɛn brok PTFE ay-tɛmpracha tep ɔnda ripit bɛnd de kam dɔŋ to tri tin dɛn we yu kin pik: glas fayba riinfɔs sabstret, 0.18mm tik (ɔ we fit fɔ yu lod), ɛn silikon adeziv. Kɔrɛkt instɔleshɔn – klin sɔfays, nɔ tɛnsiɔn, edj riinfɔsmɛnt – de dɛbul di ifɛktiv layf.

Fɔ ay-saykl aplikeshɔn (sila, prɛs, kɔnvayɔr wit tayt rayus), tink bɔt wan wev glas fayba rɛinfɔs gred ɛn inspɛkt ɛvri mɔnt fɔ maykrokrak.

Nid ɛp fɔ pik di rayt PTFE tep fɔ yu dinamik ikwipmɛnt? Aokai PTFE’s teknikol tim de gi fri aplikeshɔn rivyu. Kontakt wi wit yu mashin spesifikeshɔn ɛn saykl ret.

Na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl paramita, aplikeshɔn kes, ɛn kɔstɔmayz sɔlvishɔn fɔ ful-rɛnj prodak dɛn we inklud PTFE ay tɛmpracha fabrik, PTFE ay tɛmpracha tep, PTFE mɛsh bɛlt, simlɛs fiuzin bɛlt, singl-sayd PTFE klos, ay tɛmpracha rɛsistɛns kɔnvayɔr bɛlt ɛn fayvglas fabrik , duya kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de sɔpɔt pɔshɔnal ɛn intɛgriti, we dɔn mekɔp wi maynd fɔ gi wan-stɔp sɔlvishɔn we pɔsin kin abop pan ɛn savis we wi kin tink bɔt.