Aw fɔ Pik di Prɔpa Tiknɛs fɔ PTFE Tep fɔ Kɔba Ɔt Prɛs Plɛt dɛn we Nɔ Ivin

Jiangsu Aokai Nyu Matirial, we na PTFE ay-tɛmpracha fabrik manifakta, ɛksplen se we di say we hot prɛs plet de ɔp nɔ ivin, fɔ kɔba am wit PTFE ay-tɛmpracha tep na kɔmɔn imejensi sɔlvishɔn. Fɔ mek shɔ se dɛn ripa fayn fayn wan ɛn nɔ kɔmprɔmis di ɔt transfa, di men tin de fɔ pik di PTFE tep tik ɛn kɔrɛkt aplikeshɔn tɛknik dɛn.

Fɔs: Evalyu di Kɔndishɔn fɔ di Ɔt Plɛt

Bifo yu put PTFE ay-tɛmpracha tep, asɛs di flatnɛs fɔ di ɔt plet fɔ no if tɛmporari rimɛdyeshɔn ɔ fondamental mentenɛns nid fɔ de.

· Smɔl nɔ ivin (skrach, smɔl smɔl dent): Fɔ kɔba wit PTFE ay-tɛmpracha tep na wan efishɔnal ɛn kwik mɛrɛsin fɔ mek di sɔfa flatnɛs bak ɛn gi nɔ-stik protɛkshɔn.

· Sivεr difכmeshכn (warpage, tiknes mistek pas 0.3 mm): PTFE hεy-tεmprachכ tep kin כnli yuz as tεmporari imejensi mεzhɔ. Fɔ mek yu ebul fɔ abop pan am fɔ lɔng tɛm, i fayn fɔ mek yu plan am wit mɛkanikal ɔ fɔ mek yu kɔrɛkt di ɔt plet we yu sabi du am. Di bad bad difɔmeshɔn we dɛn nɔ ripɛnt go mek di prɛshɔn nɔ ivin ivin wit bɔku layers fɔ PTFE tep ɛn i kin mek sef denja.

Sɛkɔn: Sayntis Sɛlɛkshɔn fɔ PTFE Ay-Tɛmpratura Tep Tiknɛs

Bay di kayn we aw i nɔ ivin, tu men we fɔ yuz am de.

1. Dairekt Kɔva Mɛtɔd – Fɔ Smɔl Nɔ Ivin (< 0.1 mm) .

Fɔ rili smɔl sɔfays dɛfɛkt, dɛn kin yuz wan layt fɔ PTFE ay-tɛmpracha tep fɔ ful kɔvarej.

· 0.13 mm PTFE tep:  Di prɛferɛd standad tik, we dɛn kin yuz mɔ na industri. I de kɔba fayn fayn skrat dɛn fayn fayn wan, i de gi bɛsik wear resistans, ɛn i gɛt smɔl impak pan di ɔt transfa efyushɔn.

· 0.18 mm – 0.25 mm PTFE tep:  Fכ εnhans wear rεsistεns. I fayn fɔ skrach we dip smɔl ɔ aplikeshɔn dɛn we nid fɔ de fɔ lɔng tɛm, we de gi gud kɔvarej ɛn lɔng savis layf.

· 0.3 mm – 0.5 mm PTFE tep:  Fכ maksimal difεkt kכvεreshכn. Dɛn kin yuz am fɔ dip tin dɛn we nɔ pafɛkt. Notis se we di tik tik pasmak de mek di tɛmal rɛsistɛns go ɔp, we kin mek di ɔt spid slo ɔ i kin mek di prodakshɔn saykl dɛn lɔng.

2. Gred Lεvεlin Mεtכd – Fכ Obvious Dεnt (≥ 0.1 mm) .

We dent we pɔsin kin si de na di ɔt plet, wan layt we dɛn kɔl PTFE tep nɔ kin ebul fɔ lɛvul di say we di wata de. Wan 'graded leveling method' we de yuz plɛnti layers fɔ stɛp-by-stɛp filin nid fɔ de.

Di tin dɛn we yu fɔ du:

1. Mekɔp ɛn fɛn di say we yu de:  Mɛz di eria ɛn di maksimal dip we di dent de kɔrɛkt wan.

2. Put di bays layt:  Kɔt wan pat pan PTFE tep (we dɛn kin se i tik fɔ 0.13 mm ɔ 0.18 mm) we big smɔl pas di dent ɛn put am dairekt na di say we dɛn dɔn rɛs.

3. Lay filling:  Chɛk di lɛvɛl ifɛkt. If gap dɛn stil de, put smɔl smɔl pat dɛn pan di sem ɔ tin PTFE tep we de sɛntrɛd pan di layt we bin de bifo. Ripit te di dent dɔn lɛvul bɔku bɔku wan.

4. Ful safa kɔva:  Afta yu dɔn lɛvɛl, put wan big, ful sheet fɔ PTFE tep (ɛgz., 0.13 mm ɔ 0.18 mm) oba di ɔl ɔt plet as yunifom wok safa fɔ mek shɔ se i flat ɛn nɔ stik pefɔmɛns.

Tɔd: Sɛlɛkshɔn fɔ PTFE Tep Wid ɛn Aplikeshɔn Gaydlain

Tep width tu signifyantli afekt fainal pefomans.

· Waid tep (ɛgz., 100 mm, 180 mm):  Fɔ kɔba big eria. Ridyus di sim dɛn we de ɔvalap ɛn avɔyd ɔt transfɔm ɔ prɛs mak we nɔ ivin we bɔku jɔyn dɛn kin mek.

· Narכw tep (εgz., 10 mm, 25 mm):  Fכ edj, rap gayd, εn fayn εria dεm. Ofa big fleksibiliti in opareshɔn.

Width prinsipul fɔ gred lɛvɛl: Lɔwa layers fɔ big in eria pas ɔpa layers fɔ mek wan smol slɔp transishɔn. Di layt we de na do pas ɔl fɔ kɔba di wan ol say we dɛn dɔn ripɛnt.

Notis dɛn bɔt aw fɔ Aplay PTFE Ay-Tɛmpratura Tep

· Klin di surface:  Bifo yu put am, klin di hot plet surface gud gud wan wit anhydrous alcohol fɔ pul di ɔyl, dɔst, ɛn residual adhesive fɔ mek i strɔng.

· Rimov di ay bɔbul dɛn:  Yuz skrap fɔ pres fayn fayn wan frɔm wan say to di ɔda say, mek shɔ se i tayt we yu nɔ gɛt ɛya bɔbul dɛn we dɔn trɔp.

· Inspekshɔn ɔltɛm:  As sɔntin we pɔsin kin yuz, dɛn fɔ inspɛkt PTFE tep ɔltɛm fɔ si if i wɛr, fɔ mek i gɛt kabon, ɔ fɔ es am. Riples am wantɛm wantɛm if dɛn si se tin nɔ fayn.

· Sef ɔpreshɔn:  Ɔl di wok fɔ du afta dɛn dɔn stɔp di ikwipmɛnt, dɛn dɔn diskonɛkt di pawa, ɛn di ɔt plet dɔn fulɔp fɔ mek i nɔ skel. Nɔ fos fɔ rap ɛn prɛs ɔt plet dɛn we dɔn pwɛl bad bad wan wit PTFE tep.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl paramita, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin dɛn, singl-sayd PTFE klos, ay-tɛmpracha resistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha fayvglas klot, duya kɔntakt wi na:

· Mista Guo: 18944819998

· Mista Liu: 13705266308